AN EXPERIMENTAL AND ANALYTICAL STUDY OF IMPACT FORCES DURING HUMAN JUMPING

Date

1988-01-01

Author

Özgüven, Hasan Nevzat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

114
views

0
downloads

Impact forces during landing in dismounts from the horizontal bar onto regulation gymnastic mats and in jumping from a height of 0.45 m onto a hard surface were measured. A two degree-of-freedom dynamic model was developed to predict the forces in landing on the hard surface. The periods of the two peaks that can be identified from experimental data were used in the determination of the system parameters. The peak forces recorded in gymnasts' landing ranged from 8.2 to 11.6 times the body weight. Maximum forces in jumping from 0.45 m, which ranged from 5.0 to 7.0 times the body weight, were accurately predicted by the model

Subject Keywords

Biophysics, Rehabilitation, Orthopedics and Sports Medicine, Biomedical Engineering

URI

https://hdl.handle.net/11511/43145

Journal

JOURNAL OF BIOMECHANICS

DOI

https://doi.org/10.1016/0021-9290(88)90252-7

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

A Multivariate Approach to Assessing Anaerobic Power Following a Plyometric Training Program Koçak, Mehmet Settar (Ovid Technologies (Wolters Kluwer Health), 1997-01-01) This study used a multivariate approach to assess anaerobic power in 20 athletes and 20 nonathletes undergoing 6 weeks of plyometric training, and 20 controls. A 3 x 2 mixed model MANOVA was done to analyze the pre-and posttest scores of vertical jump, 50-m dash, and Margaria-Kalamen stairclimbing test. The Group x Test interaction was significant (p < 0.001). Both groups that underwent plyometric training improved significantly (p < 0.01) on all tests of anaerobic power. Of the dependent measures, the Marg...
A New method for the calculation of static flight loads of rigid fuselage of rotorcraft Gül, Seyhan; Yaman, Yavuz; Department of Aerospace Engineering (2016) The loads acting on a rotorcraft fuselage in pull-up, push-over, and yaw maneuvers and gust conditions are required to be calculated by civil and military standards. For each maneuver and the gust condition, different flight and rotor speeds, mass states, altitudes, and temperatures are required to be analyzed. This may add up to thousands of conditions. Calculation of fuselage loads for all these conditions with transient analysis is not only computationally expensive but it also requires a lot of engineer...
Surgical repair of cartilage defects of the patella Atik, OS; Korkusuz, Feza (Ovid Technologies (Wolters Kluwer Health), 2001-08-01) The structure and biomechanical forces on the patellar joint challenges researchers to define an ideal method for resurfacing the patellar cartilage. The articular surface of the patella presents variability between individuals, and has various minor articulations that bear partial or total compressive, shear, and combined forces during movement. Surgical techniques for the repair of patellar cartilage defects have evolved from cumulative advances in basic science and technology. Such surgeries include the ...
Comparison of the Effects of Eccentric, Concentric, and Eccentric-Concentric Isotonic Resistance Training at Two Velocities on Strength and Muscle Hypertrophy Ünlü, Gürcan; ÇEVİKOL, CAN; MELEKOĞLU, TUBA (Ovid Technologies (Wolters Kluwer Health), 2020-02-01) Ünlü, G, Çevikol, C, and Melekoğlu, T. Comparison of the effects of eccentric, concentric, and eccentric-concentric isotonic resistance training at two velocities on strength and muscle hypertrophy. J Strength Cond Res 34(2): 337–344, 2020—The aim of this study was to compare the effects of concentric, eccentric, and eccentric-concentric isotonic resistance training at both fast and slow velocities to determine whether contraction modality affects muscle strength and hypertrophy. Forty-one young, healthy ma...
Analysis of the effects of vertical pre-release cracks on prestressed concrete bridge girders Baran, Eray; French, Catherine; Wyffels, Tina (Precast/Prestressed Concrete Institute, 2004-11-01) Vertical cracks, termed "pre-release cracks," beginning at the top flange and propagating downward into the section depth have been observed to develop during the production of long-span prestressed concrete bridge girders. The cracking which is attributed to the restrained shrinkage the concrete and thermal effects during the curing period prior to release of the prestressing strands, tends to be more critical for long-span girders with deep sections and large amounts of prestressing strands. Studies were ...

Citation Formats

H. N. Özgüven, “AN EXPERIMENTAL AND ANALYTICAL STUDY OF IMPACT FORCES DURING HUMAN JUMPING,” JOURNAL OF BIOMECHANICS, pp. 1061–1066, 1988, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43145.