Analysis of wrinkling in deep drawing processes

Download

index.pdf

Date

2019

Author

Dal, Saniye Rabia

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

234
views

174
downloads

Wrinkling, observed due to compressive instability, is one of the main failure modes in deep drawing processes. The prediction and prevention of wrinkles are critical for production of stamping parts which require good surface quality. In the current work, the occurrence of wrinkling in square and cylindrical cup deep drawing processes are investigated considering various constitutive models; formed by using CPB06ex2, Hill’48, BBC2008-8p, BBC2008-16p, and von Mises yield criterion with isotropic, kinematic and combined hardening. Numerical simulations were performed by implementing CPB06ex2, BBC2008-8p and BBC2008-16p models to a commercial ﬁnite element code through user subroutines. In the simulations, AA5042-H2 aluminum alloy with 1 mm thickness were employed. First a comparison is made between the predictions of the constitutive models and the experimental results of the previous works to evaluate the accuracy of the developed models. It was found that the predictions of all constitutive models for the number of wrinkles are in good agreement with experimental data. The CPB06ex2 model gives closer numerical results with experiments for the wrinkling proﬁle and the punch force evolution comparing to the other models. Moreover, square cup drawing process needs higher blank holding forces to prevent wrinkling than cylindrical cup drawing at the same punch travel.

Subject Keywords

Sheet-metal work., Wrinkling, Sheet Metal Forming, Deep drawing, Finite Element Method.

URI

http://etd.lib.metu.edu.tr/upload/12623845/index.pdf
https://hdl.handle.net/11511/44059

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Modelling and simulation of friction in deep drawing Başpınar, Murat; Akkök, Metin; Department of Mechanical Engineering (2011) Different contact surface parameters and operating characteristics are observed during the deep drawing process. It is not possible to find a formulation that can be used for all lubrication regimes. Therefore, several friction models have been developed in order to overcome this problem. In this study, a math program is developed which combines Wilson’s and Khonsari’s friction models in a new model in order to increase accuracy and efficiency in friction calculations. By comparing the results of both frict...
Analysis of effects of temperature variation on deep drawing process using different constitutive laws Demirkol, Rasih Hakan; Darendeliler, Haluk; Department of Mechanical Engineering (2019) In this study, the influences of temperature variation in deep drawing process are investigated by changing the temperatures of the whole blank, a part of the blank, the punch and die. Different yield criteria and hardening rules are considered to form the constitutive relations. The numerical results are obtained by using a commercial finite element software. Whereas Von-Mises and Hill48 yield criteria are available in the finite element code, a subroutine is developed for embedding the Yld2003 yield crite...
The effect of strain rate and temperature on deep drawing for different constitutive relations Gökşen, Seçkin; Darendeliler, Haluk; Department of Mechanical Engineering (2019) In this study, the effects of strain rate and temperature on deep drawing process are investigated by considering different yield criteria and hardening models. For this purpose, various punch velocity and temperature values are considered using 1 mmthick DKP6112 and AZ31 sheet materials. The results are compared according to thickness strain distribution and punch force obtained by a commercial finite element software. To express constitutive relations of corresponding materials for different strain rate a...
Investigation of the layering mechanism of agglomerate growth during drum pelletization Sastry, KVS; Dontula, P; Hoşten, Çetin (Elsevier BV, 2003-02-19) Conventional drum pelletization circuits exhibit undesirable surging behavior that is known to result from uncontrolled occurrence of the mechanisms of nucleation, coalescence and layering. This study was undertaken to investigate the mechanism of pellet growth by layering. Several laboratory experiments were carried out to delineate the effect of feed moisture content and feed quantity. This paper presents an analysis of the experimental results and a simple model to describe the layering process. (C) 2002...
Surface energy and excess charge in (1x2)-reconstructed rutile TiO2(110) from DFT plus U calculations Unal, Hatice; METE, ERSEN; Ellialtıoğlu, Süleyman Şinasi (2011-09-09) Physically reasonable electronic structures of reconstructed rutile TiO2(110)-(1x2) surfaces were studied using density functional theory (DFT) supplemented with Hubbard U on-site Coulomb repulsion acting on the d electrons, the so called DFT + U approach. Two leading reconstruction models proposed by Onishi and Iwasawa [Surf. Sci. Lett. 313, 783 (1994)] and Park and coworkers [Phys. Rev. B 75, 245415 (2007)] were compared in terms of their thermodynamic stabilities.

Citation Formats

S. R. Dal, “Analysis of wrinkling in deep drawing processes,” Thesis (M.S.) -- Graduate School of Natural and Applied Sciences. Mechanical Engineering., Middle East Technical University, 2019.