Nonlinear dynamic modeling of gear-shaft-disk-bearing systems using finite elements and describing functions

Date

2004-05-01

Author

Maliha, R
Dogruer, CU
Özgüven, Hasan Nevzat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

194
views

0
downloads

This study presents a new nonlinear dynamic model for a gear-shaft-disk-bearing system. A nonlinear dynamic model of a spur gear pair is coupled with linear finite element models of shafts carrying them, and with discrete models of bearings and disks. The nonlinear elasticity term resulting from backlash is expressed by a describing function, and a method developed in previous studies to determine multi harmonic responses of nonlinear multi-degree-of-freedom systems is employed for the solution. The excitations considered in the model are external static torque and internal excitation caused by mesh stiffness variation, gear errors and gear tooth profile modifications. The model suggested and the solution method presented combine the versatility of modeling a shaft-bearing-disk system that can have any configuration without a limitation to the total degree of freedom, with the accuracy of a nonlinear gear mesh interface model that allows to predict jumps and double solutions in frequency response. Thus any single stage gear mesh configuration can be modeled easily and accurately. With the model developed it is possible to calculate dynamic gear loads, dynamic bearing forces, dynamic transmission error and bearing displacements. Theoretical results obtained by using the method suggested are compared with the experimental data available in literature, as well as with the theoretical values calculated by employing a previously developed nonlinear single degree of freedom model.

Subject Keywords

Mechanical Engineering, Mechanics of Materials, Computer Graphics and Computer-Aided Design, Computer Science Applications

URI

https://hdl.handle.net/11511/45704

Journal

JOURNAL OF MECHANICAL DESIGN

DOI

https://doi.org/10.1115/1.1711819

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

Monte Carlo analysis of ridged waveguides with transformation media Ozgun, Ozlem; Kuzuoğlu, Mustafa (Wiley, 2013-07-01) A computational model is presented for Monte Carlo simulation of waveguides with ridges, by combining the principles of transformation electromagnetics and the finite methods (such as finite element or finite difference methods). The principle idea is to place a transformation medium around the ridge structure, so that a single and easy-to-generate mesh can be used for each realization of the Monte Carlo simulation. Hence, this approach leads to less computational resources. The technique is validated by me...
Vision based obstacle detection and avoidance using low level image features Senlet, Turgay; Halıcı, Uğur; Department of Electrical and Electronics Engineering (2006) This study proposes a new method for obstacle detection and avoidance using low-level MPEG-7 visual descriptors. The method includes training a neural network with a subset of MPEG-7 visual descriptors extracted from outdoor scenes. The trained neural network is then used to estimate the obstacle presence in real outdoor videos and to perform obstacle avoidance. In our proposed method, obstacle avoidance solely depends on the estimated obstacle presence data. In this study, backpropagation algorithm on mult...
Analysis and design of a compliant variable stroke mechanism TANIK, ENGİN; Söylemez, Eres (Elsevier BV, 2010-10-01) In this paper, analysis and design of an underactuated compliant variable stroke mechanism are presented by employing its pseudo-rigid-body model (PRBM). During the design two cases are considered: prescribed output loading and constant input torque. It is shown that this mechanism is suitable where variable stroke is required corresponding to variable output loading. It is also observed that this mechanism is capable of providing nearly constant force over a wide range of input. The analysis and design app...
Extending Correlation Filter-Based Visual Tracking by Tree-Structured Ensemble and Spatial Windowing Gundogdu, Erhan; Özkan, Huseyin; Alatan, Abdullah Aydın (Institute of Electrical and Electronics Engineers (IEEE), 2017-11-01) Correlation filters have been successfully used in visual tracking due to their modeling power and computational efficiency. However, the state-of-the-art correlation filter-based (CFB) tracking algorithms tend to quickly discard the previous poses of the target, since they consider only a single filter in their models. On the contrary, our approach is to register multiple CFB trackers for previous poses and exploit the registered knowledge when an appearance change occurs. To this end, we propose a novel t...
Second-order experimental designs for simulation metamodeling Batmaz, İnci (SAGE Publications, 2002-12-01) The main purpose of this study is to compare the performance of a group of second-order designs such as Box-Behnken, face-center cube, three-level factorial, central composite, minimum bias, and minimum variance plus bias for estimating a quadratic metamodel. A time-shared computer system is used to demonstrate the ability of the designs in providing good fit of the metamodel to the simulation response. First, for various numbers of center runs, these designs are compared with respect to their efficiency, r...

Citation Formats

R. Maliha, C. Dogruer, and H. N. Özgüven, “Nonlinear dynamic modeling of gear-shaft-disk-bearing systems using finite elements and describing functions,” JOURNAL OF MECHANICAL DESIGN, pp. 534–541, 2004, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/45704.