International Summer Engineering Program on fuel cells for undergraduate engineering students

Date

2011-03-01

Author

Baker, Derek Keıth

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

138
views

0
downloads

In this paper the experiences and lessons learned from an International Summer Engineering Program (ISEP 2009) Centred around a fuel cell course are presented. ISEP was run at Middle East Technical University (METU) in Turkey with participation from The University of Texas-Austin (Texas) and The Pennsylvania State University (Penn State). The program contained 21 METU, 7 Texas and 2 Penn State students from a range of engineering majors. The fuel cell class was designed to strengthen fuel cell, core engineering, and global competency skills through a series of increasingly complex computer projects and global competency assignments. Results from an extensive evaluation completed by the students at the end of the summer are presented. Relative to most other international engineering programs or a typical engineering class, the biggest value-added educational component of the program is seen as the intensive formal and informal interaction achieved between the METU and US students. Copyright (C) 2010, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Subject Keywords

Fuel Technology, Renewable Energy, Sustainability and the Environment, Energy Engineering and Power Technology, Condensed Matter Physics

URI

https://hdl.handle.net/11511/46954

Journal

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

DOI

https://doi.org/10.1016/j.ijhydene.2010.12.106

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

ELECTRIC DRIVE FOR FLYWHEEL ENERGY-STORAGE TRIPATHY, SC (Elsevier BV, 1994-02-01) This paper presents the results of experimental work on flywheel energy storage systems for city buses. An efficient electronic hardware scheme is used to start the flywheel and traction machines. This scheme has been designed, fabricated and tested in our laboratory. A low frequency a.c. has been derived from an inverter fed from a three-phase uncontrolled rectifier to start the commutatorless d.c. motors. Commutation is achieved by using a capacitor and two auxiliary thyristors, whose ratings could be a f...
PEM fuel cell degradation effects on the performance of a stand-alone solar energy system ÖZDEN, Ender; Tarı, İlker (Elsevier BV, 2017-05-04) After comparing fresh and degraded performances of Polymer Electrolyte Membrane (PEM) based components of a hydrogen cycle with the help of computational fluid dynamics simulations, recently established stand-alone solar energy system producing hydrogen for energy storage is investigated focusing on the effects of degradation of fuel cells on the overall performance of the system. A complete model of the system has been developed using TRNSYS, and a degraded PEM Fuel Cell Subsystem has been incorporated int...
Experimental investigation of CO tolerance in high temperature PEM fuel cells DEVRİM, YILSER; Albostan, Ayhan; Devrim, Huseyin (Elsevier BV, 2018-10-04) In the present work, the effect of operating a high temperature proton exchange membrane fuel cell (HT-PEMFC) with different reactant gases has been investigated throughout performance tests. Also, the effects of temperature on the performance of a HT-PEMFC were analyzed at varying temperatures, ranging from 140 degrees C to 200 degrees C. Increasing the operating temperature of the cell increases the performance of the HT-PEMFC. The optimum operating temperature was determined to be 160 degrees C due to th...
Economical Evaluation of an Oil Field Reservoir Kök, Mustafa Verşan (Informa UK Limited, 2011-01-01) In this study, economical evaluation of an oil field reservoir was performed using software. The software used in this study consists of different sub-programs to determine recoverable oil, recovery factor, initial and final productions, production rates, and original oil and gas in place for different types of reservoirs. Recovery efficiency was found to be 29% for water drive and 4.78% for solution gas drive reservoirs. In decline curve analysis, initial and final production rates were obtained as 40 and ...
Modeling of CO2 storage in an oil reservoir Gumrah, F.; Dulger, M.; Gunaydin, D.; Senel, O. (Informa UK Limited, 2008-01-01) This study provides an overview for the carbon dioxide sequestration process in an oil reservoir by using the software CMG's GEM. Different scenarios are applied for the oil reservoir description. Firstly, a single layered reservoir is considered and simulation studies are performed, as this reservoir is homogeneous, heterogeneous and fractured. Secondly, a multi-layered reservoir is examined. In the second case, a heterogeneous system and a heterogeneous system composed of homogenous layers are selected. F...

Citation Formats

D. K. Baker, “International Summer Engineering Program on fuel cells for undergraduate engineering students,” INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, pp. 3712–3725, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/46954.