Flow induced polymer-filler interactions: Bound polymer properties and bound polymer-free polymer phase separation and subsequent phase inversion during mixing

Date

1990-11

Author

Akay, G.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

170
views

0
downloads

The irreversible absorption of macromolecules on to solid filler particles during mixing in the melt is investigated. The molecular weight and concentration dependence of the absorbed layer thickness are evaluated and the chemical and morphological nature of the irreversibly absorbed polymer (bound polymer) are determined. It is found that the thickness of the bound polymer is not only dependent on the filler concentration but also dependent on polymer molecular weight. Bound polymer in high density polyethylene/colloidal silica systems is more amorphous and contains higher concentration of oxidation products (which are induced by a mechanochemical reaction during mixing) when compared with free polymer. As a result of bound polymer formation, flow induced crystallization and polymer entrapment during mixing, a phase separation between bound polymer and free polymer takes place which eventually leads to a liquid to solid phase inversion when the phase volume of the solids exceed a critical value under isothermal conditions. If the mixing is continued after phase inversion, the particle size of the newly formed powder is reduced and particle size distribution, is narrowed. This process of phase inversion and subsequent size reductions are termed as crumbling which can take place at filler concentrations well below the expected maximum packing fraction of solids, if the filler particle size is small and/or the molecular weight of the polymer is high. Crumbling phenomena are utilized in the agglomeration of fine powders and microencapsulation of solids and/or liquids.

Subject Keywords

Materials Chemistry, General Chemistry, Polymers and Plastics

URI

https://onlinelibrary.wiley.com/doi/epdf/10.1002/pen.760302106
https://hdl.handle.net/11511/51385

Journal

Polymer Engineering and Science

DOI

https://doi.org/10.1002/pen.760302106

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Polyacrolein with microspherical structure obtained by radiation-initiation and base catalysis Usanmaz, Ali; Dogan, Recep Dursun (Springer Science and Business Media LLC, 1990-3) Acrolein was polymerized by radiation and base catalyzed condensation. Radiation polymerization was carried in bulk form under vacuum and air atmosphere at several temperatures. The conversion reached close to 100%, and polymers were free flowing white powders up to 5% conversion at −15°C, up to 80% at higher temperatures and up to 10% in air atmosphere polymerization. Radiation polymerization from aqueous solutions of various pH and from acetone solutions gave white powder polymers with limiting conversion...
Conducting polymer composites: Polypyrrole and poly(vinyl chloride vinyl acetate) copolymer Balci, N; Bayramli, E; Toppare, Levent Kamil (Wiley, 1997-04-25) Composites of a polypyrrole (PPy) and poly(vinyl chloride-vinyl acetate) copolymer (PVC-PVA) were prepared both chemically and electrochemically. An insulating polymer was retained in the blend and the thermal stability of the polymer was enhanced by polymerizing pyrrole into the host matrix in both cases. The composites prepared electrochemically gave the best results in terms of conductivity and air stability. (C) 1997 John Wiley & Sons, Inc.
Phase transition of chemically synthesized FePt nanoparticles under high pressure ŞİMŞEK, TELEM; Karci, Ozgur; ÖZCAN, ŞADAN (The Scientific and Technological Research Council of Turkey, 2018-01-01) We present the results of a study related to phase transformation of chemically synthesized FePt nanoparticles under high pressure from face-centered cubic into face-centered tetragonal structure. As-synthesized nanoparticles are around 4.5 nm and show superparamagnetic behavior at 300 K. After annealing under 60 bar pressure of hydrogen at 400 degrees C for 2 h, nanoparticles exhibit strong ferromagnetic behavior with 5391 Oe coercivity. Results show that high-pressure annealing lowers the decomposition te...
Mechanical properties of plasma surface-modified calcium carbonate-polypropylene composites Akovali, G; Akman, MA (Wiley, 1997-02-01) Calcium carbonate was surface-modified by plasma-polymerized acetylene and the effect of surface modification on the mechanical properties of calcium carbonate-polypropylene composites was investigated. Two different plasma polymerization conditions were selected and applied. Chemical structures of plasma-polymerized acetylene products were identified. Mechanical and thermal properties of the composites prepared were evaluated and the effects of surface modification on the extent of adhesion of filler to th...
Studies on the effect of electrode type and substrate temperature on plasma polymerization of two model compounds: Acrylonitrile and hexamethyldisiloxane Akovalı, Güneri; Dilsiz, Nursel (Wiley, 1990-4) Polymers were prepared from saturated (HMDS) and unsaturated (AN) monomers in a radio frequency discharge (plasma). The effect of selected parameters such as electrode type (such as Cu, Zn, Ni, Al), reactor type, and substrate temperature (other parameters constant) on chemical structure and the rate of polymer deposition was examined by Fourier transform infrared (FTIR) spectroscopy. Differences in the nature of electrodes and reactor types were found to yield similar plasma products with similar rates of ...

Citation Formats

G. Akay, “Flow induced polymer-filler interactions: Bound polymer properties and bound polymer-free polymer phase separation and subsequent phase inversion during mixing,” Polymer Engineering and Science, pp. 1361–1372, 1990, Accessed: 00, 2020. [Online]. Available: https://onlinelibrary.wiley.com/doi/epdf/10.1002/pen.760302106.