AN INVESTIGATION INTO THE ELECTROCHEMICAL PRODUCTION OF Si BY THE FFC CAMBRIDGE PROCESS

Date

2012-03-15

Author

ERGUL, Emre
Karakaya, İshak
Erdoğan, Metehan
ERDEN, Fuat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

84
views

0
downloads

The FFC Cambridge process was suggested as a promising Si production technique for the expanding solar energy industry. Direct electrochemical reduction of bulk SiO2 plates and porous SiO2 pellets in molten CaCl2-NaCl salt mixture were investigated at 750 degrees C by applying 2.8 V potential difference. The produced Si powder was brown and found to be contaminated by the Ni and stainless steel plates used as the cathode contacting materials. The reduction rates of the bulk SiO2 plates and porous SiO2 pellets were compared from variations of current and accumulative electrical charge that passed through the cell during the electrochemical reduction. The amorphous bulk SiO2 plates were reduced slightly faster than porous pellets of crystalline SiO2. The overall reduction potential of SiO2 pellets against the graphite anode at 750 degrees C in molten CaCl2- NaCl salt mixture was determined as 2.3 V by cyclic voltammetry. This potential was supported by calculations.

Subject Keywords

FFC Cambridge Process, Solar grade silicon, Cyclic voltammetry

URI

https://hdl.handle.net/11511/52781

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Modelling and performance analysis of linear fresnel collector for process heat generation for ice cream factory in Konya Singh, Rahul; Baker, Derek Keıth; Tarı, İlker; Department of Mechanical Engineering (2017) In this thesis, a linear Fresnel collector has been designed to supply solar heat for industrial process. Firstly, optical analysis using ray tracing is done to determine the effects of collector’s parameters, such as height of receiver, mirror width and profile, gap between adjacent rows and slope deviation. Afterwards, one-dimensional thermal model is presented which predicts surface temperatures of receiver components and heat loss. The results obtained from both optical and thermal studies are then benc...
A methodology to assess suitability of a site for small scale wet and dry CSP systems Uzgoren, Eray; Timur, Eray (2015-06-25) This study presents a methodology to assess suitability of a site for small scale concentrated solar power (CSP) systems for its energy conversion efficiency and make-up water requirement. Energy conversion efficiency of CSPs relies not only on the level of direct solar radiation but also on the performance of the cooling system. Regions with high solar potential have to deal with heat rejection at elevated temperatures which causes reduced energy conversion efficiencies due to high condenser temperatures. ...
A Feasibility study for external control on self-organized production of plasmonic enhancement interfaces for solar cells Zolfaghari Borra, Mona; Bek, Alpan; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2013) The present study is about the improvement of the energy conversion efficiency of solar cells in which plasmonic light-trapping approach has been investigated. In this study, metal nanoparticles are allowed to form in a self-organized fashion on both flat and textured full scale monocrystalline silicon solar cell. These metal nanoparticles with strong optical interaction cross-sections at localized plasmonic resonance energies, improve coupling of the incoming light into the active area of solar cells by wa...
A new economic feasibility approach for solar chimney power plant design Okoye, Chiemeka Onyeka; Solyali, Oguz; Taylan, Onur (2016-10-15) Solar chimney power plants have been accepted as one of the promising technologies for solar energy utilization. The objective of this study is to propose an effective approach to simultaneously determine the optimal dimensions of the solar chimney power plant and the economic feasibility of the proposed plant. For this purpose, a two-stage economic feasibility approach is proposed based on a new nonlinear programming model. In the first stage, the proposed optimization model which determines the optimal pl...
Investigation of olive mill sludge treatment using a parabolic trough solar collector Ben Othman, Fares; Eddhibi, Fathia; Bel Hadj Ali, Abdessalem; Fadhel, Abdelhamid; Bayer, Özgür; Tarı, İlker; Guizani, Amenallah; Balghouthi, Moncef (2022-01-15) The olive mill sludge treatment system developed in this study is an indirect solar dryer driven by a solar parabolic trough collector (PTC). A heat exchanger is implemented to heat air with hot oil coming from the solar collector. The developed hot air dryer can treat up to 50 kg of olive mill sludge distributed over six trays at once. The designed system and its components are described, along with their experimental and simulated performance evaluations. With a mean direct normal irradiation (DNI) higher...

Citation Formats

E. ERGUL, İ. Karakaya, M. Erdoğan, and F. ERDEN, “AN INVESTIGATION INTO THE ELECTROCHEMICAL PRODUCTION OF Si BY THE FFC CAMBRIDGE PROCESS,” 2012, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/52781.