ELECTROLUMINESCENT PROPERTIES OF CERTAIN POLYAROMATIC COMPOUNDS: PART 2-ORGANIC EMITTERS

2009-01-01
Türker, Burhan Lemi
Tapan, Alper
Gumus, Selcuk
This review is based on the electroluminescent and optical properties of certain polyaromatics in OLEDs with special attention to their specific function in the emitting layer, performance and emissive color. DAD and TDAD dopants depending on their concentration in the emitting layer exhibit good efficiencies and color purity for blue emission. When copolyethers with diphenylanthracene emitting segments are used in a single layer diode, visible pure blue light (440 nm maximum) around 15-20V can be achieved. J-Aggregates including anthracene moieties contribute to the efficient IR electroluminescence. Blue, white, yellow and orange electroluminescent devices can be obtained by ADNor ADN-doped with rubrene at ultra low concentrations. Pyrene derivatives (P1, P2) linked to fluorene exhibit high thermal stability, bright blue emission and improved hole injection ability. Aminobenzanthrone derivatives as host emitters emit orange-to-red light with high brightness (25000 cd. m(-2)), current efficiency (3.52 cd. A(-1)) and power efficiency. Due to its bipolar transport property, when doped in Alq3 or NPB, tetraphenylnaphtacene shows excellent yellow electroluminescence. Multiple quantum well (MQW) structures including rubrene are helpful in narrower and tunable spectral emission, as well as higher emission efficiency. Perylene derivatives such as copolymer+PVK blend show sharp red emission peaks, photochemical and thermal stability. Pentacene derivatives, DPP, 1-DNP and 2-DNP can be used to obtain highly pure purple color. An increase in the doping concentration of DPP enhances photoluminescent peak intensity. New blue-green emitting dopants like coronene, decacylene and conjugated ladder systems based on phthalocyanines are centers of attraction for electroluminescence in recent years.
POLYCYCLIC AROMATIC COMPOUNDS

Suggestions

Morphing Hydrogel Patterns by Thermo-Reversible Fluorescence Switching
Bat, Erhan; Saxer, Sina; Maynard, Heather D. (Wiley, 2014-07-01)
Stimuli responsive surfaces that show reversible fluorescence switching behavior in response to temperature changes were fabricated. Oligo(ethylene glycol) methacrylate thermoresponsive polymers with amine end-groups were prepared by atom transfer radical polymerization (ATRP). The polymers were patterned on silicon surfaces by electron beam (e-beam) lithography, followed by conjugation of self-quenching fluorophores. Fluorophore conjugated hydrogel thin films were bright when the gels were swollen; upon te...
Effects of nucleating agent and processing conditions on the mechanical, thermal, and optical properties of biaxially oriented polypropylene films
Yuksekkalayci, C; Yılmazer, Ülkü; Orbey, N (Wiley, 1999-07-01)
The effects of nucleating agent, temperature of crystallization, and degree of machine direction (MD) orientation on the mechanical, optical, and thermal properties of biaxially oriented polypropylene (BOPP) films were investigated. Addition of nucleating agent improved only the initial tear resistance in the MD; however, the other mechanical and optical properties did not change appreciably. Ln the set of experiments in which the crystallization temperature was increased, the degree of crystallinity also i...
Electrochemical and Optical Studies of Furan and Thieno[3,2-b]thiophene End Capped Benzotriazole Derivatives
AKBASOGLU, Naime; BALAN, Abidin; BARAN, Derya; Çırpan, Ali; Toppare, Levent Kamil (Wiley, 2010-12-01)
Two new 2-dodecyl benzotriazole (BTz) based donor-acceptor-donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2-b]thiophene (TT) endcapped BTz monomers. Furan based and thieno[3,2-b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetr...
DIPOLE-MOMENTS OF ISOTACTIC AND ATACTIC POLY(PROPYLENE OXIDE) SAMPLES
KUCUKYAVUZ, Z; ALYURUK, K; AHMAD, AM (Elsevier BV, 1991-01-01)
Dipole moments of poly(propylene oxide) (PPO) samples with different tacticities were determined from dielectric constant and refractive index increment measurements, which were performed on dilute toluene and isooctane solutions. In contrast to previous reports, both refractive index increments and the dipole moment ratios showed a marked dependence on the tacticities of the samples. The dipole moment ratios of isotactic samples were greater than unity and decreased with increasing sequence concentration...
Soluble Alkyl Substituted Poly(3,4-Propylenedioxyselenophene)s: A New Platform For Optoelectronic Materials
Atak, Samed; Icli-Ozkut, Merve; Önal, Ahmet Muhtar; CİHANER, ATİLLA (Wiley, 2011-10-15)
Optical and electrochemical properties of regiosymmetric and soluble alkylenedioxyselenophene-based electrochromic polymers, namely poly(3,3-dibutyl-3,4-dihydro-2H-seleno pheno [3,4-b][1,4]dioxephine) (PProDOS-C(4)), poly(3,3-dihexyl-3,4-dihydro-2H-selenopheno[3,4-b][1,4]dioxephine) (PProDOS-C(6)), and poly(3,3-didecyl-3,4-dihydro-2H-selenopheno[3,4-b][1,4]dioxephine) (PProDOS-C(10)), are highlighted. It is noted that these unique polymers have low bandgaps (1.57-1.65 eV), and they are exceptionally stable ...
Citation Formats
B. L. Türker, A. Tapan, and S. Gumus, “ELECTROLUMINESCENT PROPERTIES OF CERTAIN POLYAROMATIC COMPOUNDS: PART 2-ORGANIC EMITTERS,” POLYCYCLIC AROMATIC COMPOUNDS, pp. 139–159, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56752.