Design and realization of a 3D laser beam profiler and construction of 3D image by laser scanner

Download
093180.pdf
2000
Çuhadar, Damla
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/6084
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and analysis of a linear shape memory alloy actuator
Söylemez, Burcu; Kadıoğlu, Fevzi Suat; Department of Mechanical Engineering (2009)
Shape memory alloys are new, functional materials used in actuator applications with their high power to weight ratio. The high strength or displacement usage of shape memory alloys makes them suitable for direct drive applications, which eliminate use of power transmission elements. The aim of this research is to develop the methodology and the necessary tools to design and produce linear shape memory alloy actuators to be used in missile systems, space applications, and test equipments. In this study, the...
Design and Testing of a Linear Generator for Wave-Energy Applications
Hodgins, Neil; Keysan, Ozan; McDonald, Alasdair S.; Mueller, Markus A. (2012-05-01)
A linear-generator topology is proposed for wave-energy applications. The main significance of the generator topology is that the relative position of the magnets, copper, and steels has been chosen so that there are no magnetic attraction forces between a stator and a permanent-magnet (PM) translator. The lack of magnetic forces and the modular nature of the generator topology make the manufacture and assembly of the generator easier than a conventional iron-cored PM linear generator. Analytical modeling t...
Design and implementation of microwave lumped components and system integration using MEMS technology
Temoçin, Engin Ufuk; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents the design and fabrication of coplanar waveguide to microstrip transitions and planar spiral inductors, and the design of metal-insulator-metal capacitors, a planar band-pass, and a low-pass filter structures as an application for the inductors and capacitors using the RF MEMS technology. This thesis also includes a packaging method for RF MEMS devices with the use of “benzocyclobutene” as bonding material. The transition structures are formed by four different methods between coplanar ...
Design and realization of a step motor driver with micro-stepping capability
Ateş, Emel Hizal; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (2011)
Step motors are motion control mechanisms that convert digital pulses into mechanical shaft rotation. They provide high precision positioning and repeatability of movement without a closed loop control, which is preferable for industrial applications in which accurate positioning control is needed. In this thesis, design and realization of a step motor driver will be performed using micro-stepping, which is based on controlling the current of each winding of the motor continuously and solves noise and reson...
Design and implementation of reconfigurable transmitarray unit cells employing the element rotation method by microfluidics
Erdil, Emre; Aydın Çivi, Hatice Özlem; Topallı, Kağan; Department of Electrical and Electronics Engineering (2014)
This thesis presents design, fabrication and measurement of a novel, continuously tunable, circularly polarized X-band microfluidic transmitarray unit cell. To the author’s knowledge, this is the first study in the literature where a microfluidics approach is used to tune the phase of the transmitted field through the unit cell by the element rotation method. Furthermore, the generalized transmitarray design conditions necessary to utilize the element rotation method are derived. To implement the novel micr...
Citation Formats
D. Çuhadar, “Design and realization of a 3D laser beam profiler and construction of 3D image by laser scanner,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr