Computer aided modeling of deep-drawing

Date

2007-04-04

Author

Piskin, Mehmet Ali
Kaftanoglu, Bilgin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

138
views

0
downloads

Deep-drawing operations are performed widely in industrial applications. It is very important for efficiency to achieve parts with no defects. in this work, a finite element method is developed to simulate deep-drawing operation including wrinkling. A four nodded five degree of freedom shell element is formulated. Isotropic elasto-plastic material model with Von Mises yield criterion is used. By using this shell element, the developed code can predict the bending behavior of workpiece besides membrane behavior. Simulations are carried out with four different element sizes. The thickness strain and nodal displacement values obtained are compared with results of a commercial finite element program and results of previously conducted experiments.

Subject Keywords

Deep-drawing, Sheet metal forming, Finite element method, Computer aided metal forming

URI

https://hdl.handle.net/11511/64915

DOI

https://doi.org/10.4028/0-87849-437-5.341

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Computer aided modeling of wrinkling and its prevention Pişkin, Mehmet Ali; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2005) Deep-drawing operations are performed widely in industrial applications. It is very important for efficiency to achieve parts with no defects. Wrinkling is a kind of defect caused by stresses in the flange part of the blank during metal forming operations. It is required that the flange of a workpiece in deep drawing operation should deform in its plane without wrinkling otherwise it will impair the quality of the product. To avoid wrinkling appropriate blank-holder force or drawbead can be applied. In this...
Finite element analysis of shearing processes Isbir, S.; Darendeliler, Haluk; Gökler, Mustafa İlhan (null; 2006-12-01) Shearing of sheet metal is extensively used in manufacturing industry. It is a highly non-linear process and involves complex mechanisms such as crack initiation and propagation, and deliberate fracture of the material for obtaining the desired geometry. Finite element method can be used for the design of shearing process. However, most of the general purpose commercial finite element analysis programs do not provide ready-to-use facilities to simulate shearing. In this paper, finite element simulation of s...
First principles investigation of hydrogen storage in intermetallic systems Kınacı, Alper; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2007) The design and production of efficient metal-hydrides for hydrogen storage is a long standing subject. Over the years, many different types of intermetallic hydride systems were studied and some of them came out to be operable. However, none of them meet all the storage criteria perfectly. In this study, total energies, hydrogen storage capacity and stability of AB (A = Al, Be, Cu, Fe, Ni, Sb, V and B = Ti) type intermetallics were investigated with the goal of spotting a potential hydrogen storage material...
Numerical analysis of thermo-mechanical behavior in flow forming Günay, Enes; Fenercioglu, Tevfik Ozan; Yalçınkaya, Tuncay (2021-01-01) Flow forming is a metal forming process for cylindrical workpieces where high velocity deformation leads to radial thinning and axial extension. In the current study, a thermomechanical, dynamic and explicit finite element model of a flow forming process is developed on ABAQUS software. The model is validated through the comparison of reaction forces and geometry obtained from the experiments. Coolant convection effect is analyzed in conjunction with roller and mandrel conduction cooling to study the therma...
Analysis of wrinkling in deep drawing processes Dal, Saniye Rabia; Darendeliler, Haluk; Department of Mechanical Engineering (2019) Wrinkling, observed due to compressive instability, is one of the main failure modes in deep drawing processes. The prediction and prevention of wrinkles are critical for production of stamping parts which require good surface quality. In the current work, the occurrence of wrinkling in square and cylindrical cup deep drawing processes are investigated considering various constitutive models; formed by using CPB06ex2, Hill’48, BBC2008-8p, BBC2008-16p, and von Mises yield criterion with isotropic, kinematic ...

Citation Formats

M. A. Piskin and B. Kaftanoglu, “Computer aided modeling of deep-drawing,” 2007, vol. 344, p. 341, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64915.