Globular Actuator Group for Reversible Movement in a Complex Pipe

Date

2011-09-10

Author

Yaguchi, H.
Sato, N.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

102
views

0
downloads

Finding damage inside pipes is important for the inspection of complex pipes used in nuclear power plants and chemical plants. An in-pipe robot capable of movement in narrow complex pipes has not yet been developed. Two actuators of the same size and characteristics are coupled by the magnetic connection method, which generates almost no mechanical loss. The globular magnetic actuator group capable of reversible motion through elongation and contraction of eight shape memory-alloy (SMA) coils was fabricated. Experimental results indicate that the prototype actuator group is able to climb at a rate of 73 mm/s in a straight pipe with no load mass. In addition, the average speeds for two patterns of movement in a complex pipe with several curved sections and step sections were measured. The prototype actuator group is able to move in a complex pipe at an average speed of over 30 mm/s.

URI

https://hdl.handle.net/11511/65499

Collections

Unclassified, Conference / Seminar

Suggestions

OpenMETU
Core

Catabolic genes dependent detection of aerobic BTEX degraders Yavas, Alper; İçgen, Bülent (null; 2017-11-14) Monoaromatic hydrocarbons, including benzene, toluene, ethylbenzene and xylene, collectively called BTEX, are major components of gasoline and are thought to be the most significant contaminants of soil and groundwater due to frequent leakages from underground storage tanks and accidental spills. Degradation of BTEX compounds by bacteria is known to be one of the most efficient ways to remove these compounds from soil and groundwater. There have been extensive studies demonstrating that BTEX degradation is ...
Monte Carlo simulations of radioactive waste embedded into polymer Ozdemir, Tonguc; Usanmaz, Ali (Elsevier BV, 2009-09-01) Radioactive waste is generated from the nuclear applications and it should properly be managed according to the regulations set by the regulatory authority. Poly(carbonate urethane) and poly (bisphenol a-co-epichlorohydrin) are radiation-resistant polymers and they are possible candidate materials that can be used in the radioactive waste management. In this study, maximum allowable waste activity that can be embedded into these polymers and dose rate distribution of the waste drum (containing waste and the...
Axial gas mixing in conical spouted beds with high density particles Güler, Neslin; KÖKSAL, MURAT; Külah, Görkem (2023-10-01) Conical spouted beds operating with high-density particles (ρp > 2500 kg/m3) have recently gained attention because of their potential use as nuclear fuel coaters for next-generation nuclear reactors. In the literature, the number of axial gas mixing studies in conical and conical-cylindrical spouted beds is very limited and all axial mixing studies were carried out with relatively light particles (ρp ≤ 2500 kg/m3). Therefore, the objective of this study was to generate experimental data that can be used to...
Effect of chromium on the oxidation of steels used in the construction of petroleum refinery heaters Sultan, Abdelrahman Saleh; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2013) Low chromium steels used in the construction of petroleum refinery heaters work in flue gas environments containing water vapor. On the other hand, the higher oxidation rates of chromium containing steels in moist atmospheres have been reported. P-5, P-22, P-11(containing 5, 2.25 and 1.25 %Cr) and C-5 steels, used in petroleum refinery construction, were subjected to isothermal oxidation tests. These steels were tested in two different environments; air and flue gas of natural gas combustion -CO2+2H2O+7.52N...
A Laboratory Column Investigation for the Treatment of Cr(VI) with Zero-Valent Iron Uyusur, Burcu; Ünlü, Kahraman (Mary Ann Liebert Inc, 2009-02-01) Permeable reactive barrier (PRB) technology is commonly placed in the list of options for groundwater remediation at hazardous waste sites, where Cr(VI) treatment in groundwater has been a concern more than any other inorganic contaminants. The objective of this study was to investigate the effectiveness and longevity of Cr(VI) removal with zero-valent iron based PRBs. The main focus was on two parameters affecting the performance of Cr(VI) removal with PRBs: (1) amount of reactive media and (2) groundwater...

Citation Formats

H. Yaguchi and N. Sato, “Globular Actuator Group for Reversible Movement in a Complex Pipe,” 2011, p. 709, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65499.