POLYMERIZATION OF BIS(4-BROMO-2,6-DICHLOROPHENOXO) ETHYLENEDIAMINE COPPER(II) COMPLEX BY ELECTRO-INITIATION

Date

1991-01-01

Author

KISAKUREK, D
YIGIT, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

142
views

0
downloads

Bis(4-bromo-2,6-dichlorophenoxo) ethylenediamine copper(II) complex has been polymerized using electro-initiation by constant potential electrolysis, in dimethylformamide-tetrabutylammonium fluoroborate solvent-supporting electrolyte couple, at room temperature under air or N2. The process leads to low molecular weight (5.6 x 10(3)) linear poly(dichlorophenylene oxide). The structures of the polymers were determined by H-1-NMR and C-13-NMR. The kinetics of the polymerization were followed by in situ cyclic voltammetry measurements during electrolysis. Unlike thermal polymerization of this complex, the polymerization by electro-initiation begins immediately.

Subject Keywords

Organic Chemistry, General Physics and Astronomy, Polymers and Plastics

URI

https://hdl.handle.net/11511/65500

Journal

EUROPEAN POLYMER JOURNAL

DOI

https://doi.org/10.1016/0014-3057(91)90039-q

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Electrochemical polymerisation of 2-aminofluorene in ethylalcohol/water medium Imamoglu, T; Önal, Ahmet Muhtar (Elsevier BV, 2004-08-01) Electrochemical polymerisation of 2-aminofluorene, 2AF, was investigated in ethylalcohol/water mixture (3:2, v:v) in the presence of HClO4 as the supporting electrolyte via constant potential electrolysis, CPE. Prior to CPE, electrochemical behaviour of the monomer was investigated in the same solvent electrolyte couple utilising cyclic voltammetry, CV. Electrochemical polymerisation of the monomer yielded insoluble, dark bluish-green, conducting polymer deposit on the electrode surface. Characterisation of...
Polymerization of propylene oxide by the Pruitt-Baggett catalyst Çolak, Nureddin; Alyürük, Kemal (Elsevier BV, 1989-9) The Pruitt-Baggett adduct (PBA) which formed from the reaction of FeCl3 with propylene oxide (PO) was hydrolysed in diethyl ether (ether) solutions at different mole ratios. Although the hydrolysates were insoluble in ether they could be converted into PO-soluble form (PBC) by a thermal treatment providing that the r value was kept smaller or equal to unity. PBC polymerized PO concurrently into a mixture of high molecular weight crystalline polymer with low molecular weight non-crystallizable oligomers. Th...
Polymerization of propylene oxide and copolymerization of carbon disulphide and propylene oxide with xanthate salts Aksoy, S.; Balkan, M.; Alyürük, K. (Elsevier BV, 1989-1) Anionic polymerization of propylene oxide (PO) using several xanthate salts was studied. Low molecular weight oily polymers with variable sulphur content were obtained by using either potassium ethyl xanthate or potassium benzyl xanthate. The highest attainable conversion of PO was limited to ca 10%. The polymerization was accompanied by formation and precipitation of a by-product salt. In the presence of CS2, an oily copolymer with about 40% sulphur was obtained from the above mixtures. In reaction systems...
A soluble and multichromic conducting polythiophene derivative Varis, Serhat; Ak, Metin; Tanyeli, Cihangir; Akhmedov, Idris Mecidoglu; Toppare, Levent Kamil (Elsevier BV, 2006-10-01) A new soluble polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-4-nitrophenyl-2,5-di(2-thienyl)-1H-pyrrole (SNSNO2). Chemical method produces a polymer which is completely soluble in organic solvents. The structures of both the monomer and the soluble polymer were elucidated by H-1 and C-13-NMR and FTIR. The average molecular weight has been determined by GPC to be Mn = 6.3 x 10(3) for the chemically synthesized polymer. P(SNSNO2) was also synthesize...
Immobilization of invertase and glucose oxidase in poly 2-methylbutyl-2-(3-thienyl) acetate/polypyrrole matrices Isik, S; Alkan, S; Toppare, Levent Kamil; Cianga, I; Yagci, Y (Elsevier BV, 2003-12-01) Immobilization of invertase and glucose oxidase in conducting polypyrrole and copolymers of poly 2-methylbutyl-2-(3-thienyl) acetate with pyrrole were achieved via electrochemical method. Sodium dodecyl sulphate was found to be the most suitable supporting electrolyte. Maximum reaction rate, Michaelis-Menten constant and optimum temperatures were determined for native and immobilized enzymes. Storage and operational stabilities of enzyme electrodes were also investigated.

Citation Formats

D. KISAKUREK and S. YIGIT, “POLYMERIZATION OF BIS(4-BROMO-2,6-DICHLOROPHENOXO) ETHYLENEDIAMINE COPPER(II) COMPLEX BY ELECTRO-INITIATION,” EUROPEAN POLYMER JOURNAL, pp. 955–958, 1991, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65500.