Digital control of universal telecommunication power supplies using dual 8-bit microcontrollers

Date

2002-10-18

Author

Kutluay, K
Cadirci, I
Yafavi, A
Cadirci, Y

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

161
views

0
downloads

Design and implementation of a digital controller for universal telecommunication power supply modules are presented. The paper emphasises on converter control strategy, and its implementation by means of parallel operated, dual 8-bit microcontrollers. One of the microcontrollers is employed for user interface purposes, such as long term records, display and alarm facilities, which are inherently slow processes. The fast processing speed required by output voltage setting, current limit, and load current sharing however, is fulfilled by the second microcontroller, which adjusts the output voltages of modules. The proposed dual-processor based digital controller provides an extended operating output voltage range, user programmable current limit setting, serial-communi cation based active load current sharing between modules, and automatic derating without extra hardware requirement. Overload and output short-circuit protection features are also software-controlled. The controller is tested successfully on six parallel operating, 1.8 M, 0-70V telecommunication power supplies.

Subject Keywords

Switched mode power supplies, Digital control, Microcontroller applications

URI

https://hdl.handle.net/11511/67719

DOI

https://doi.org/10.1109/ias.2002.1042710

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Real-time hardware-in-the-loop simulation of electrical machine systems using FPGAs Üşenme, Serdar; Dilan, R.A.; Dölen, Melik; Koku, Ahmet Buğra (2009-11-18) This study focuses on the development an integrated software and hardware platform that is capable of performing real-time simulation of dynamic systems, including electrical machinery, for the purpose of hardware-in-the-loop simulation (HILS). The system to be controlled is first defined using a block diagram editor. The defined model is then compiled and downloaded onto an FPGA (¿Field Programmable Gate Array¿) based hardware platform, which is to interface with the controller under test and carry out the...
Output voltage control of a four-leg inverter based three-phase ups by means of stationary frame resonant filter banks Demirkutlu, Eyyüp; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2006) A method for high performance output voltage control of a four-leg inverter based three-phase transformerless UPS is proposed. Voltage control loop is employed and the method employs stationary frame resonant filter controllers for the fundamental and harmonic frequency components. A capacitor current feedback loop provides active damping and enhances the output voltage dynamic performance. The controller design and implementation details are given. Linear and nonlinear loads for balanced and unbalanced loa...
Multi-DSP and -FPGA-Based Fully Digital Control System for Cascaded Multilevel Converters Used in FACTS Applications Atalik, Tevhid; Deniz, Mustafa; Koc, Erkan; Gercek, Cem Ozgur; Gultekin, Burhan; Ermiş, Muammer; ÇADIRCI, IŞIK (2012-08-01) In this paper, a fully digital controller based on multiple digital signal processor (DSP) and field-programmable gate array (FPGA) boards has been proposed for parallel-operated cascaded multilevel converters (CMC) used in flexible AC transmission system (FACTS) applications. The proposed system is composed of a DSP-based master controller in combination with a multiple number of slave DSP boards, FPGA boards, microcontrollers, a programmable logic controller (PLC), an industrial computer, and their periph...
Concurrent operation of wireless power transfer based contactless slip ring and motor drive system with a single converter Ayaz, Enes; Keysan, Ozan; Department of Electrical and Electronics Engineering (2022-9) This thesis presents a novel approach for concurrent power transfer to wired and wireless systems using a single inverter. This proposed approach fits a cost-effective solution to wireless power transfer (WPT) systems used in contactless slip rings (CSR) applications such as sensors, radars, or wind-turbine pitch controls. In conventional systems, there are two separate converters: one is for the motor drive, and the other is for the WPT system. It is proposed that the switching harmonics of the motor drive...
Carrier Phase Shift Method of SPWM for Concurrent Wired and Wireless Power Transfer Systems Ayaz, Enes; Altun, Ogün; Keysan, Ozan (2022-01-01) This paper presents an approach for concurrent power transfer to wired and wireless systems using just a single inverter. The approach utilizes a novel carrier phase-shift (CPS) method that independently controls the inverter output voltages at the fundamental and switching frequencies. This proposed method can be a cost-effective solution to wireless power transfer (WPT) systems used in contactless slip rings (CSR), which transfer power to auxiliary loads such as sensors, radars, and IoT devices. There are...

Citation Formats

K. Kutluay, I. Cadirci, A. Yafavi, and Y. Cadirci, “Digital control of universal telecommunication power supplies using dual 8-bit microcontrollers,” 2002, p. 1197, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/67719.