Pollution characteristics, mechanism of toxicity and health effects of the ultrafine particles in the indoor environment: Current status and future perspectives

2020-10-01
Ali, Muhammad Ubaid
Lin, Siyi
Yousaf, Balal
Abbas, Qumber
Munir, Mehr Ahmed Mujtaba
Rashid, Audil
Zheng, Chunmiao
Kuang, Xingxing
Wong, Ming Hung
Ultrafine particles (UFPs) with an aerodynamic diameter of <0.1 mu m are emerging as the most dominant and abundant particulate matter. Human exposure to these particles has increased dramatically, especially in the indoor environment as most of the population spend 80 to 90% time in the indoor environment. Due to the small size, it is believed that these particles will impose more dangerous and aggressive health impacts. However, knowledge of UFPs is still lacking as most of the previous studies focused on PM(10)and PM2.5. The current article aims to provide a critical overview of UFPs sources, composition, physicochemical properties, potential exposure route, toxicity mechanisms, and health impacts to identify the research gaps and future research directions and perspectives. It is commonly observed that inhalation is the dominant route of exposure. Inhaled ultra-fine particles can penetrate deep into the respiratory track, resulting in adverse health impacts, ranging from normal transient of respiratory problems to cardiovascular and respiratory mortality and morbidity, lung cancer, brain disease, mutagenic and carcinogenic impacts. Due to the large surface area, these particles can transport a variety of toxins causing tissue and cell injury, leading to enhanced oxidative stress and inflammation. In order to overcome the environmental burden and health consequences attributed to ultrafine particles, proper air quality guidelines should be introduced and it is suggested that future research should focus on the relationship between health symptoms and UFPs physicochemical properties, especially the mechanics of chemical transformation in human body, their biological behavior, and toxicological effect.

Suggestions

Investigation of sludge viscosity and its effects on the performance of a vacuum rotation membrane bioreactor
KOMESLİ, Okan Tarık; Gökçay, Celal Ferdi (Informa UK Limited, 2014-03-04)
Sludge characteristics of a full-scale vacuum rotation membrane (VRM) bioreactor having plate-type membranes with 0.038 m nominal pore size and 540 m(2) surface area were investigated. The VRM plant is composed of an aeration tank and a filtration chamber. The sludge floc size distribution, as determined microscopically, was mainly between 0 and 100 m in the filter chamber with very little difference in size distribution between summer (20-25 degrees C) and winter (10-15 degrees C) seasons. Small floc size ...
Quantum chemical treatment of cyanogen azide and its univalent and divalent ionic forms
Türker, Burhan Lemi; Atalar, Taner (Elsevier BV, 2008-05-30)
An explosive material, cyanogen azide (CN4) and its univalent and divalent anionic and cationic forms have been studied quantum chemically by using different theoretical approaches. In this study, the structures considered have been screened for their relative stabilities. Also, they have been investigated whether the charged forms play a role in the usual explosion process or any electrical charging during storage cause explosion. Various quantum chemical properties are obtained and discussed. It has been ...
Bioflocculation of activated sludge: The role of calcium ions and extracellular polymers
Sanin, Faika Dilek (Informa UK Limited, 2000-12-01)
In an attempt to identify the bioflocculation mechanisms, this study examines the role of calcium ions in flocculation of activated sludge. Two calcium specific chelants, ethylenebis (oxyethylenenitrilo)tetraacetic acid (EGTA) and sodium hexametaphosphate (HMT) are used to extract calcium ions. Both chemicals successfully extract the calcium ions from sludge structure, which is confirmed either by an increase in solution calcium concentration or by a decrease in calcium concentration in the sludge solid mat...
Sorption/desorption of Cs on clay and soil fractions from various regions of Turkey
Aksoyoglu, S.; Göktürk, H. (Elsevier BV, 1988-2)
The sorption desorption behaviour of Cs ion in the concentration region of 10−8 to 10−4 meqml−1 have been studied using clay and soil fractions from various regions of Turkey. The sorption curves for all the material studied show similar behaviour indicating at least two different sorption processes. One with high and the other with low distribution coefficients. The results of desorption studies indicate that Cs cation is to a large extent attached to the solid material in a reversible manner. The adsorpti...
Sorption of radioactive cesium and barium ions onto solid humic acid
Celebi, O.; Kilikli, A.; ERTEN, HASAN NİYAZİ (Elsevier BV, 2009-09-15)
In this study, the sorption behavior of two important fission product radionuclides ((137)Cs and (140)Ba) onto sodium form of insolubilized humic acid (INaA) were investigated as a function of time, cation concentration and temperature, utilizing the radiotracer method. The sorption processes are well described by both Freundlich and Dubinin-Radushkevich type isotherms. Thermodynamic constants such as: free energy (Delta G(ads)), enthalpy (Delta H(ads)), entropy (Delta S(ads)) of adsorption were determined....
Citation Formats
M. U. Ali et al., Pollution characteristics, mechanism of toxicity and health effects of the ultrafine particles in the indoor environment: Current status and future perspectives. 2020, p. 0.