Analysis of temperature distribution in pistons and applying templugs method to locally manufactured diesel engine.

Date

1970

Author

Kaleli, Yaşar

Metadata

Show full item record

Item Usage Stats

45
views

0
downloads

URI

https://hdl.handle.net/11511/6897

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Analysis of frictional contacts with heat generation considering temperature dependent properties BALCI, MEHMET NURULLAH; YILDIRIM, BORA; Dağ, Serkan (2015-10-01) The problem of thermoelastic contact for the homogenous isotropic half-plane with a sliding rigid flat punch problem is investigated. As the rigid flat punch is assumed to slide over the surface of the material, heat is generated due to the friction between the punch and a surface. This heat causes the change of material thermoelastic properties and this change is taken into account in this work by using temperature dependent material properties. In order to obtain the steady state solution, frictional heat...
Analysis of stability of downstream part of rockfill dams by finite element method. Koru, Murat; Mirata, Türker; Department of Civil Engineering (1988)
Analysis of the specific heat of p-azoxyanisole (PAA) near the phase transitions Kilit, E.; Yurtseven, Hasan Hamit (Informa UK Limited, 2010-01-01) The analysis of the experimental data for the specific heat Cp at various temperatures is given here near the nematic-isotropic liquid (TNI = 133.9 degrees C) and the solid-nematic (TSN = 117.6 degrees C) transitions in p-azoxyanisole (PAA). The analysis of the specific heat Cp is performed according to a simple power-law formula and a renormalisation-group expression. The values of the critical exponent are extracted above and below the transition temperatures of TNI and TSN for this liquid crystalline mat...
Analysis of transient forced convection between two parallel for timewise variation of inlet temperature. Yener, Yaman; Department of Mechanical Engineering (1970)
Analysis of structurally coupled interior acoustic fields by acoustoelasticity method. Sözer, E. Murat; Department of Mechanical Engineering (1989)

Citation Formats

Y. Kaleli, “Analysis of temperature distribution in pistons and applying templugs method to locally manufactured diesel engine.,” Middle East Technical University, 1970.