Strengthening in Multilayered Cu-Nb through Alloying

Date

2017-12-01

Author

Özerinç, Sezer
Averback, Robert

Metadata

Show full item record

Item Usage Stats

52
views

0
downloads

URI

https://mrsfall.zerista.com/event/member/430661
https://hdl.handle.net/11511/74899

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Strengthening of brick infilled rc frames with cfrp reinforcement-general principles Akın, Emre; Özcebe, Güney; Department of Civil Engineering (2011) There is an excessive demand for the rehabilitation of frame type reinforced concrete (RC) buildings which do not satisfy current earthquake code provisions. Therefore, it is imperative to develop user-friendly seismic strengthening methodologies which do not necessitate the evacuation of building during rehabilitation period. In this study, it was aimed to strengthen the brick infill walls by means of diagonal Carbon Fiber-Reinforced Polymer (CFRP) fabrics and to integrate them with the existing structural...
Strengthening of L-shaped composite laminates using carbon nanotube reinforcement and thin ply non-crimp fabrics Arca, Miray Aydan; Çöker, Demirkan; Papila, Melih; Department of Aerospace Engineering (2014) The advances in manufacturing technologies have increased the use of composite materials in complex shapes such as curved beams. However, use of composites in complex geometries creates a weakness at the curvature and causes delamination failure. Major objective is to provide solution for this problem without degrading properties or increasing the weight of the structure. In this study, the effect of CNTs in the resin and the use of non-crimp fabric on the fracture toughness and curved beam strength of lami...
Strengthening effect of synthetic fabrics in flexible pavement overlays Tunçay, Harun Tulu; Yüce, Rüştü; Department of Civil Engineering (1996)
Reinforcement of polyesters by boron minerals Akgün, Aydın Mert; Tinçer, Teoman; Özdemir, Tonguç; Department of Polymer Science and Technology (2015) Polymers are used in areas where exposure to high-energy radiation might occur. Main effects of irradiation on polymers are crosslinking, chain scission and oxidation. Radiation resistance of polymers depends on structure, additives, or irradiation conditions. Since boron is highly effective material against radiation, especially against neutron radiation, with its high absorption cross section, boron products is used for radiation applications. The aim of this study is to investigate the effects of differe...
Reinforcement of epoxies by boron minerals Babuçcuoğlu, Yurdaer; Tinçer, Teoman; Özdemir, Tonguç; Department of Polymer Science and Technology (2015) As polymers/fillers have shown much improved mechanical and thermal properties, the subject of epoxy resin reinforcement using boron minerals fillers has become valuable subject to study. The aim of this study is how boron minerals influence epoxy resins’ mechanical and thermal properties under gamma irradiation. The effects of boron on the mechanical and thermal properties of epoxy were studied in terms of mineral type, mineral loading concentration and irradiation dose in air and under vacuum. Bisphenol-A...

Citation Formats

S. Özerinç and R. Averback, “Strengthening in Multilayered Cu-Nb through Alloying,” 2017, Accessed: 00, 2021. [Online]. Available: https://mrsfall.zerista.com/event/member/430661.