Comparative Analysis between D shaped and I shaped bluff body for piezoelectric energy harvesting to power Wireless Sensor Nodes for underwater pipeline monitoring applications

Date

2016-08-26

Author

Qureshi, Fassahat Ullah
Muhtaroğlu, Ali
Tuncay, Kağan

Metadata

Show full item record

Item Usage Stats

46
views

0
downloads

URI

https://hdl.handle.net/11511/75353

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Comparative study of transient and quasi-steady aeroelastic analysis of composite wind turbine blade in steady wind conditions Sargın, Hakan; Kayran, Altan; Department of Aerospace Engineering (2014) The objective of this study is to conduct a comparative study of the transient and quasi-steady aeroelastic analysis of a composite wind turbine blade in steady wind conditions. Transient analysis of the wind turbine blade is performed by the multi-body dynamic code Samcef Wind Turbine which uses blade element momentum theory for aerodynamic load calculation. For this purpose, a multi-body wind turbine model is generated with rigid components except for the turbine blades. For the purposes of the study, a r...
Comparative Study on Energy Efficiency of WSNs and WMSNs for Surveillance Applications Kizilkaya, Burak; Ever, Enver; Yazıcı, Adnan (2019-01-01) The infrastructure required to deliver various "Internet of Things" (IoT) services is expected to be widely available in the very near future for application areas such as Smart Cities, Smart Homes, Intelligent Transportation and Smart Monitoring in the coming decades. In fact, it is expected that the number of devices connected to the Internet will exceed 50 billion by 2020. It is possible to use these infrastructures for environmental monitoring systems, especially for the early detection and prevention o...
Comparative study on surface enhanced raman scattering activity of various silver nanostructures Demirtaş, Özge; Bek, Alpan; Taşgın, Mehmet Emre; Department of Physics (2017) In this work, the effect of the strong field enhancement generated in the near field of metal nanoparticles and nanowires was investigated by taking advantage of the plasmon frequencies induced by Raman laser light stimulation of free conduction electrons of these metal nanostructures. Small number of molecules that are either bound to these nanostructures or located up to a few nanometers away from the nanostructures can be detected easily through strong electromagnetic field enhancement. The aim of this w...
Comparative study on deposition of fluorine-doped tin dioxide thin films by conventional and ultrasonic spray pyrolysis methods for dye-sensitized solar modules Icli, Kerem Cagatay; Kocaoglu, Bahadir Can; Özenbaş, Ahmet Macit (2018-01-01) Fluorine-doped tin dioxide (FTO) thin films were produced via conventional spray pyrolysis and ultrasonic spray pyrolysis (USP) methods using alcohol-based solutions. The prepared films were compared in terms of crystal structure, morphology, surface roughness, visible light transmittance, and electronic properties. Upon investigation of the grain structures and morphologies, the films prepared using ultrasonic spray method provided relatively larger grains and due to this condition, carrier mobilities of t...
COMPARATIVE STUDY OF POST-BUCKLING LOAD REDISTRIBUTION IN STIFFENED AIRCRAFT PANEL WITH AND WITHOUT MATERIAL NONLINEARITY AYDIN, ENES; Kayran, Altan (2018-11-15) In this article, a comparative study is presented on the post buckling load redistribution in stiffened aircraft panels modeled with and without material nonlinearity. In the first part of the study, a baseline stiffened panel is generated for further investigation of the material nonlinearity on the post-buckling behavior and on the effective width of the stiffened panel. In this respect, a stiffener section which provides classical clamped edge condition is designed by matching the compression buckling co...

Citation Formats

F. U. Qureshi, A. Muhtaroğlu, and K. Tuncay, “Comparative Analysis between D shaped and I shaped bluff body for piezoelectric energy harvesting to power Wireless Sensor Nodes for underwater pipeline monitoring applications,” 2016, vol. 1, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75353.