Mathematical Modeling for the analysis of Laminated Glass Plates with Simple Free Boundary Conditions

Date

2015-12-22

Author

Aşık, Mehmet Zülfü

Metadata

Show full item record

Item Usage Stats

113
views

0
downloads

URI

https://hdl.handle.net/11511/75628

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Mathematical modeling of fluidized bed combustors with radiation model Alagöz, Düriye Ece; Selçuk, Nevin; Department of Chemical Engineering (2006) Simultaneous solution of the conservation equations for energy and chemical species in conjunction with radiative transfer equation was carried out by coupling a previously developed and tested system model of fluidized bed combustion (FBC) to an existing radiation model. The predictive accuracy of the coupled code was assessed by applying it to 0.3 MWt METU Atmospheric Bubbling Fluidized Bed Combustor (ABFBC) Test Rig burning lignite in its own ash and comparing its predictions with the measured temperatur...
Mathematical modelling of sulfur retention in fluidized bed combustors Altındağ, Hakan; Selçuk, Nevin; Oymak, Olcay; Department of Chemical Engineering (2003) A considerable number of modeling studies for the investigation of sulfur retention in atmospheric bubbling fluidized bed combustors have been carried out and well documented in the literature. Despite 30 years of intensive study of sulfation process in fluidized bed combustors and numerous laboratory studies, there are still many uncertainties and disagreements on the subject. In addition, modeling sulfur retention performance of Turkish lignites with high sulfur, volatile matter and ash contents has not d...
Mathematical modeling of swelling in high moisture whey protein gels Öztop, Halil Mecit (Elsevier BV, 2011-09-01) Gels prepared from whey proteins can be used for controlled release of nutrients or active ingredients in food systems. The objective of this study was to characterize the water uptake by these hydrophilic gels to aid in the design of release systems. Whey protein isolate (WPI) gels (17% w/w protein) of different aspect ratios were submersed in aqueous solution at pH 7.0. Modeling of mass uptake is presented in terms of Case I (Fickian diffusion) and Case II (kinetic) models. Due to the extent of swelling, ...
Mathematical modeling of a bubbling fluidized bed combustor co-fired with cotton residue and lignite Yaşar, Mehmet Soner; Külah, Görkem; Selçuk, Nevin; Department of Chemical Engineering (2018) A comprehensive system model, previously developed for prediction of combustion behaviors of Turkish lignites, lignite/hazelnut shell and lignite/olive residue blends in fluidized bed combustors, is extended for modeling of co-combustion of Turkish lignite and cotton residue in a bubbling fluidized bed combustor. Cotton residue has high nitrogen content (~ 4.1 wt. % a.r.) unlike lignite (~ 0.9 wt. % a.r.), olive residue (~ 1.6 wt. % a.r.) and hazelnut shell (~ 0.5 wt. % a.r.), which leads to relatively high...
Mathematical Modeling of Turbulent Flows of Newtonian Fluids in a Concentric Annulus with Pipe Rotation SORGUN, MEHMET; Aydın, İsmail; ÖZBAYOĞLU, Evren; SCHUBERT, J J (2012-03-01) In this study, a mathematical model is proposed to predict flow characteristics of Newtonian fluids inside a concentric horizontal annulus. A numerical solution, including pipe rotation, is developed for calculating frictional head losses in concentric annuli for turbulent flow. Navier-Stokes equations are numerically solved using the finite differences technique to obtain the velocity field. Experiments with water are performed in a concentric annulus with and without pipe rotation. Average fluid velocitie...

Citation Formats

M. Z. Aşık, “Mathematical Modeling for the analysis of Laminated Glass Plates with Simple Free Boundary Conditions,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75628.