Prediction of the Seismic Demands on Concrete Gravity Dams using 3D vs 2D Modeling

2016-06-30
Bybordiani, Milad
Arıcı, Yalın
Show full item record
21
views
0
downloads
https://hdl.handle.net/11511/78156
Unverified, Conference / Seminar

Suggestions

Prediction of ice accretion shapes on aircraft wings using open-source software
Edeeb, Seghaer; Akay, Hasan U.; Özgen, Serkan (2021-10-01)
Ice accretion on aircraft components starts when an aircraft flies through atmospheric clouds containing supercooled liquid droplets, which have a temperature below freezing point but are still in a liquid state. Ice accretion occurs when water droplets impinge and freeze on the unprotected frontal regions of aircraft surfaces. The accumulated ice on aircraft components degrades the aircraft performance and causes serious flight problems. In this study, a computational fluid dynamics package is developed us...
Prediction of the stresses around main and tail gates during top coal caving by 3D numerical analysis
Basarir, Hakan; Oge, I. Fend; Aydin, Osman (2015-06-01)
The objective of this paper is to predict the stresses around the tail and main gates of Soma Eynez underground coal mine, located in Western part of Turkey. In the studied mine, the magnitude and the direction of stresses around the gateways frequently change due to a planned mining method, which is a combination of a fully mechanized traditional longwall and longwall top coal caving (LTCC) methods. In the mine, a 30-35 m thick coal seam is going to be produced by three slices. The upper slice will be prod...
Prediction of Maximum Air Velocities Induced by Metro Trains in Tunnels Using Artificial Neural Networks
Koc, Gencer; Sert, Cüneyt; Albayrak, Kahraman (2014-09-01)
Prediction of Pressure Variation at an Elbow Subsequent to a Liquid Slug Impact by Using Smoothed Particle Hydrodynamics
DİNÇER, Ali Ersin; Bozkuş, Zafer; TIJSSELING, A. S. (2018-06-01)
Liquid slug flow driven by pressurized air in an inclined pipe with a downstream elbow is investigated numerically. As the liquid slug hits the elbow, the impact pressure and the associated force generated at the elbow may damage pipe supports as well as the pipe itself. It is essential for the design engineers of pipeline systems to accurately predict the pressure trace during the impact for safe operation. The slug arrival velocity and slug length (i.e., mass) at the elbow directly affect that pressure. I...
Prediction of automobile tire cornering force characteristics by finite element modeling and analysis
Tönük, Ergin; Ünlüsoy, Yavuz Samim (2001-05-01)
In this study, a detailed finite element model of a radial automobile tire is constructed for the prediction of cornering force characteristics during the design stage. The nonlinear stress-strain relationship of rubber as well as a linear elastic approximation, reinforcement, large displacements, and frictional ground contact are modeled. Validity of various simplifications is checked. The cornering force characteristics obtained by the finite element tire model are verified on the experimental setup const...
Citation Formats
M. Bybordiani and Y. Arıcı, “Prediction of the Seismic Demands on Concrete Gravity Dams using 3D vs 2D Modeling,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78156.
METU IIS - Integrated Information Service open@metu.edu.tr