Development of Silk Fibroin/CNF Scaffolds for Cardiac Patch Applications

2019-09-30
Tufan, Yiğithan
Garipcan, Bora
Ercan, Batur
Show full item record
129
views
0
downloads
https://hdl.handle.net/11511/79004
https://www.eventclass.org/contxt_esb2019/online-program/session?s=II-OS8#e60
30th Annual Conference of the European Society for Biomaterials,( 9 - 13 Eylül 2019)
Department of Chemical Engineering, Conference / Seminar

Suggestions

Development of porous chitosan-gelatin/hydroxyapatite composite scaffolds for hard tissue-engineering applications
Isikli, C.; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2012-02-01)
Composite scaffolds prepared from natural polymers and hydroxyapatite (HA) are expected to have enhanced osteoconductive properties and as a result gained much attention in recent years for use in bone tissue-engineering applications. Although there are various natural polymers available for this purpose, chitosan (C) and gelatin (G) are commonly studied because of their inherent properties. The aim of this study was to prepare three-dimensional (3D) scaffolds using these two natural polymers and to add eit...
Development of Injectable Cell Carrier Systems for Bone Tissue Engineering
Aydoğdu Kayadelen, Hazal; Keskin, Dilek; Baran, Erkan Türker; Tezcaner, Ayşen (2015-10-24)
Development of clinoptilolite/poly ε-caprolactone -polyethylene glycol - poly ε-caprolactone triblock copolymer based scaffolds for bone tissue engineering
Pazarçeviren, Ahmet Engin; Tezcaner, Ayşen; Keskin, Dilek; Department of Engineering Sciences (2016)
Bone tissue engineering mainly depends on the feasible substitutes with ability to regenerate damaged bone tissue. One of the applications in which bone tissue engineering mainly focuses on is the production of bone tissue scaffolds. These scaffolds are expected to be biocompatible, highly interconnective and porous to provide a niche for colonizing bone cells. In addition, bone tissue scaffolds should be mechanically strong enough to accommodate compression. Scaffolds should also be biodegradable to encour...
Development of polybenzimidazole/graphene oxide composite membranes for high temperature PEM fuel cells
Uregen, Nurhan; Pehlivanoglu, Kubra; Ozdemir, Yagmur; DEVRİM, YILSER (2017-01-26)
In this study, phosphoric acid doped Polybenzimidazole/Graphene Oxide (PBI/GO) nano composite membranes were prepared by dispersion of various amounts of GO in PBI polymer matrix followed by phosphoric acid doping for high temperature proton exchange membrane fuel cell (HT-PEMFC) application. The structure of the PBI/GO composite membranes was investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and by thermogravimetric analysis (TGA). The introduction of GO into the FBI polymer matri...
Development of PBI based membranes for H₂/CO₂ separation
Başdemir, Merve; Yılmaz, Levent; Kalıpçılar, Halil; Department of Chemical Engineering (2013)
Recent developments have confirmed that in the future hydrogen demand in industrial applications will arise because of the growing requirements for H2 in chemical manufacturing, petroleum refining, and the newly emerging clean energy concepts. Hydrogen is mainly produced from the steam reforming of natural gas and water gas shift reactions. The major products of these processes are hydrogen and carbon dioxide. The selective removal of CO2 from the product gas is important because it poisons catalysts in the...
Citation Formats
Y. Tufan, B. Garipcan, and B. Ercan, “Development of Silk Fibroin/CNF Scaffolds for Cardiac Patch Applications,” presented at the 30th Annual Conference of the European Society for Biomaterials,( 9 - 13 Eylül 2019), 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79004.
METU IIS - Integrated Information Service open@metu.edu.tr