Experimental investigation of dynamic delamination in curved woven and unidirectional composite laminates

Date

2015-10-21

Author

Tasdemir, Burcu
Uyar, Imren
Çöker, Demirkan

Metadata

Show full item record

Item Usage Stats

60
views

0
downloads

URI

https://hdl.handle.net/11511/80001

Conference Name

The 2nd International Conference on Future Technologies in Wind Energy, 19 - 21 October 2015

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental investigation of dynamic delamination in curved composite laminates Uyar, İmren; Çöker, Demirkan; Department of Aerospace Engineering (2014) In the aerospace industry, high demand for lightweight structures is fostering the use of composite laminates in a wide variety of shapes, as primary load carrying elements. However, once a composite laminate takes a highly curved shape, such as an L-shape, high interlaminar stresses induced in the curved region causes dynamic delamination formation. This thesis discusses the experimental investigation of delamination in L-shaped CFRP composite laminates under quasi-static shear loading. An experimental set...
Experimental investigation of failure mechanism in cross-ply and fabric curved composite laminates Çevik, Ahmet; Çöker, Demirkan; Department of Aerospace Engineering (2021-8) Laminated curved-shape composite parts which are used in the spar and ribs in aircraft and wind turbine blades are subjected to high interlaminar tensile and shear stresses. These stresses cause delamination and subsequent reduction in load-carrying capacity. In this study, failure mechanism of cross-ply and fabric curved composite laminates under pure transverse loading are examined experimentally using an in-house designed test fixture. Stress field over the curved beam is obtained with finite element ana...
Experimental investigation of CNT effect on curved beam strength and interlaminar fracture toughness of CFRP laminates Arca, M. A.; Çöker, Demirkan (2014-06-20) High mechanical properties and light weight structures of composite materials and advances in manufacturing processes have increased the use of composite materials in the aerospace and wind energy industries as a primary load carrying structures in complex shapes. However, use of composite materials in complex geometries such as L-shaped laminates creates weakness at the radius which causes delamination. Carbon nanotubes (CNTs) is preferred as a toughening materials in composite matrices due to their high m...
Experimental Investigation of Impact Induced Failure Process in CFRP Composite Laminates Topaç, Ömer Tanay; Taşdemir, Burcu; Gürses, Ercan; Çöker, Demirkan (null; 2015-09-12)
Experimental investigation of particle filtration in compression resin transfer molding of advanced composites Aydil Dalkıran, Tuğçe; Erdal Erdoğmuş, Merve; Department of Mechanical Engineering (2014) With the inclusion of particle fillers in advanced continuous fiber reinforced composites, issues such as impregnation with increased viscosity of the injected resin leading to high process pressures and possible nonhomogeneous/directional composite properties due to filtering of filler particles necessitate the study of the relations between processing parameters and the resulting particle distributions. In this study, the particle-resin interaction during compression resin transfer molding (CRTM) and resi...

Citation Formats

B. Tasdemir, I. Uyar, and D. Çöker, “Experimental investigation of dynamic delamination in curved woven and unidirectional composite laminates,” presented at the The 2nd International Conference on Future Technologies in Wind Energy, 19 - 21 October 2015, London, Canada, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80001.