Development of advanced low N ferritic/martensitic steel for reactor applications

Date

2018-01-01

Author

Rietema, C.j.
Clarke, A.j.
Saleh, T.a.
Aydoğan Güngör, Eda
Anderoglu, O.
Clarke, K.d.

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85060868062&origin=inward
https://hdl.handle.net/11511/81202

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Development of advanced low N ferritic/martensitic steel for reactor applications Rietema, Connor; Clarke, Amy; Saleh, Tarik; Aydoğan Güngör, Eda; Anderoglu, Osman; Clarke, Kester (2018-01-01)
Development of piezoelectric ceramics for ultrasonic motor applications Kalem, Volkan; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2011) This study has been carried out to develop and manufacture piezoelectric ceramic materials which are utilized for ultrasonic motor (USM) applications. For this purpose, the effect of compositional modifications on the dielectric and piezoelectric properties of lead zirconate titanate (PZT) based ceramics was investigated. PZT based powders were produced using the mixed oxide method. The base composition was selected as Pb(Zr0.54Ti0.46)O3. The samples in the proximity of morphotrophic phase boundary were dop...
Development of solid sodium borohydride hydrogen gas generator for portable pem fuel cell applications Boran, Aslı; Eroğlu, İnci; Department of Chemical Engineering (2018) Hydrogen is considered as a promising candidate to replace fossil fuels. For implementing a hydrogen based infrastructure, hydrogen storage is the mainobstacle that is needed to be overcome. Being boron based compound, sodium borohydride, NaBH4, is a convenient hydrogen storage material for applications like unmanned air vehicles. There are several issues behind commercialization of NaBH4 hydrolysis systems. This doctorate thesis aims to be solution of NaBH4 hydrolysis system by highlighting three main cont...
Development of magnesium based negative electrode materials for nickel metal hydride batteries Eyövge, Cavit; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2017) Negative electrode materials of the nickel metal hydride (NiMH) batteries generally based on AB5 or similar compounds that make use of rare earth elements. The high cost of these elements makes it necessary to look for other alternatives that are more readily available and of low cost. It is also desirable to aim for materials that would have discharge capacity higher than roughly 350 mAh/g, which is typical of AB5 compounds. Magnesium-based hydrogen storage alloys have attracted considerable attention as a...
Development of diffusion bonded materials for electronics cooling applications Atabay, Sıla Ece; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2017) Failure of most of the electronic systems are originating from deterioration of the components due to excessive heat flux generation. The unstoppable demand for more complex and miniaturized electronic systems makes the development of more suitable and feasible production methods for their cooling systems and components compulsory. In the scope of this study diffusion bonding behavior of the aluminum (Al) 6063 alloy was investigated to make this bonding method and alloy system available for the electronic c...

Citation Formats

C. j. Rietema, A. j. Clarke, T. a. Saleh, E. Aydoğan Güngör, O. Anderoglu, and K. d. Clarke, “Development of advanced low N ferritic/martensitic steel for reactor applications,” 2018, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85060868062&origin=inward.