Diffusion in Hypersonic Flows

Date

2020-10-01

Author

Gür, Hilmi Berk
Eyi, Sinan

Metadata

Show full item record

Item Usage Stats

300
views

0
downloads

In hypersonic flows, air goes into chemical reaction due to high temperature. Therefore, in addition to the Navier-Stokes Equations, chemical reaction equations need to be solved to analyze hypersonic flows. A model may be need to simulate the diffusion phenomena among chemical species. It is possible to implement Fick's Law of Diffusion as well as Stefan-Maxwell Diffusion Equation. Basically, in Fick's Law of Diffusion, the driving force is the species concentration differences. This method is similar to the Fourier Law of Conduction and defines a diffusion coefficient called Diffusivity. The value of this coefficient is constant for all species in this method. In order to improve the accuracy, more complex models, such as Stefan Maxwell Diffusion Equation, may be used. The driving forces, in this method, are not only the concentration differences but also the interactions of species with each other. Results are evaluated by solving the Navier Stokes and finite-rate chemical reaction equations around the Apollo AS-202 Command module. Eleven species are utilized. As diffusion models, Fick's Law of Diffusion, the Diffusivity calculation with binary collision theory and the Stefan-Maxwell Equation are implemented. Result show that more realistic models may be needed for diffusion flux calculations. Due to its elementary formulation, a rough estimation is possible using the Fick's Law. However, it is possible to improve this elementary formulation using the Binary Diffusion Model. On the other hand, Stefan-Maxwell Equation gives more detailed results since it uses more accurate formulation. In this study, the performances of these models are analyzed in hypersonic flow conditions.

URI

https://hdl.handle.net/11511/83834

Relation

A Closer Look at the Diffusion Equation

Collections

Department of Aerospace Engineering, Book / Book chapter

Suggestions

OpenMETU
Core

EXPERIMENTAL ANALYSIS AND TRANSIENT SIMULATION OF HEAT TRANSFER INSIDE THE FINNED TUBE ADSORBENT BED OF A THERMAL WAVE CYCLE ÇAĞLAR, AHMET; Yamali, Cemil (Begell House, 2019-01-01) Heat transfer enhancement inside the adsorbent bed of a thermal wave adsorption cooling cycle is investigated both experimentally and theoretically. Various adsorbent materials are tested using a finned tube adsorbent bed for the thermal wave cycle. The mathematical model is well defined, including a 2-D coupled heat and mass transfer analysis. This study presents the effects of heat transfer fluid velocity, regeneration temperature, condenser pressure, and particle diameter on the heat transfer enhancement...
Critical behaviour of ammonia near the melting point Yurtseven, Hasan Hamit (2002-08-01) This study gives our calculations for thermodynamic quantities, such as the isothermal cornpressibility k(T), thermal expansivity alphap and the specific heat C-P, as a function of temperature for solid ammonia near the melting point. Our calculations, which have been performed on the basis of an experimental study given in the literature, show that those thermodynamic quantities diver e near the melting point in ammonia. This is an indication that ammonia exhibits a critical transition as one approaches th...
Performance anallysis of an intermediate temperature solid oxide fuel cell Timurkutluk, Bora; Tarı, İlker; Department of Mechanical Engineering (2007) An intermediate temperature solid oxide fuel cell (SOFC) is developed and its performance is investigated experimentally and theoretically. In the experimental program, a gadolinium doped ceria based membrane electrode group is developed with the tape casting and screen printing methodology and characterized. An experimental setup is devised for the performance measurement of SOFCs and the performance of produced cells is investigated over a range of parameters including the electrolyte thickness, the sinte...
Enhanced thermal conductivity of nanofluids: a state-of-the-art review Özerinç, Sezer; Yazicioglu, Almila Guevenc (2010-02-01) Adding small particles into a fluid in cooling and heating processes is one of the methods to increase the rate of heat transfer by convection between the fluid and the surface. In the past decade, a new class Of fluids called nanofluids, in which particles of size 1-100 nm with high thermal conductivity are Suspended in a conventional heat transfer base fluid, have been developed. It has been shown that nanofluids containing a small amount of metallic or nonmetallic particles, Such as Al2O3, CuO, Cu, SiO2,...
Reactivity of CO2 during thermal cracking of heavy paraffins under supercritical conditions Karakaş, Gürkan; Doğu, Timur (1997-11-01) Thermal cracking of n-hexadecane was investigated in a temperature range of 450-600 degrees C in the presence of CO2. Effects of pressure and temperature on product distribution were experimentally determined under both subcritical and supercritical conditions. At 1.2 MPa and with a CO2 to n-C-16 mole ratio of 25, C-6-C-14 olefins, C-10-C-17 paraffins, and C-5-C-10 fatty acids were identified in the liquid product. Experiments conducted at 4.5 MPa (supercritical) yielded higher selectivities for fatty acids...

Citation Formats

H. B. Gür and S. Eyi, Diffusion in Hypersonic Flows. 2020, p. 54.