Rapid pyrolysis and its applications intermal analysis of polymers

1996
Ersen, Taner
Show full item record
47
views
0
downloads
https://hdl.handle.net/11511/8972
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Rapid ionic liquid-supported nano-hybrid composite reinforced hollow-fiber electromembrane extraction followed by field-amplified sample injection-capillary electrophoresis: An effective approach for extraction and quantification of Imatinib mesylate in human plasma
Forough, Mehrdad; Farhadi, Khalil; Eyshi, Ali; Molaei, Rahim; Khalili, Hedayat; Kouzegaran, Vahid Javan; Matin, Amir Abbas (2017-09-01)
The focus of this study is development of a new, convenient, rapid and sensitive electromembrane extraction approach (based on an ionic liquid-supported MWCNTs/ZnO reinforced hollow fiber, for the first time) as an off-line sample clean-upipreconcentration method coupled with capillary electrophoresis (CE-UV) using field-amplified sample injection (FASI) for quantification of Imatinib mesylate in human plasma. The nano-hybrid sorbent, coated by 1-octyl-3-methylimidazolium bromide ionic liquid (E0M1m]Br) in ...
Rapid Liquid Filling of a Pipe With Venting Entrapped Gas: Analytical and Numerical Solutions
Tijsseling, Arris S.; Hou, Qingzhi; Bozkuş, Zafer (ASME International, 2019-08-01)
The motion of liquid filling a pipeline is impeded when the gas ahead of it cannot escape. Entrapped gas will lead to a significant pressure build-up in front of the liquid column, which slows down the column and eventually bounces it back. The pressure and temperature in the gas may become dangerously high, and for example, lead to fires and explosions caused by auto-ignition. This paper considers the case where the trapped gas can escape through a vent. One new element is that the pressure head of the liq...
RAPID LIFT AND DRAG PREDICTION TOOL WITH MULTI-LAYER PERCEPTRON MODEL FOR SUPERCRITICAL AIRFOILS
Atlı, Caner; Baran, Özgür Uğraş; Alemdar, Hande; Department of Mechanical Engineering (2023-1-20)
In the early stages of aircraft design, selecting the shape of parts such as wings and tails can be time-consuming. Typically, tools that can provide rapid predictions of aerodynamic coefficients are used in these stages to reduce the duration of the preliminary design phase. However, available tools and research cannot provide accurate and reliable solutions in transonic and fully turbulent flows. A new tool is developed to provide aerodynamic properties such as drag, lift, maximum lift, and drag divergenc...
Periodic micro hole texturing with metal assisted chemical etching for solar cell applications: dependence of etch rate on orientation
Altınoluk, Hayriye Serra; Çiftpınar, Emine Hande; Demircioğlu, Olgu; Turan, Raşit (2017-01-01)
Surface texturing is an indispensable process for solar cell fabrication. The interaction of the surface with the incoming sunlight is controlled by texturing in such a way that the absorption is maximized through multiple interactions. Wet and dry etching techniques have been used to create textured surfaces on solar cells. Other than standard alkaline texturing used by the industry, metal assisted etching (MAE) appears to be a promising texturing technique with greater potential application for multi-crys...
Fast implemantation of "cosine, modulated filter banks" and the design of prototype filters
Büyükatak, Kenan; Çiloğlu, Tolga; Department of Electrical and Electronics Engineering (1999)
Citation Formats
T. Ersen, “Rapid pyrolysis and its applications intermal analysis of polymers,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr