Three-dimensional boundary layer solutions

Download
056652.pdf
1996
Yavuz, Ibrahim
Show full item record
78
views
0
downloads
https://hdl.handle.net/11511/9676
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Three-Phase Inverter Topologies for Grid-Connected Photovoltaic Systems
Özkan, Ziya; Hava, Ahmet Masum (2014-05-21)
In this paper, the energy conversion efficiency (ECE) and cost characteristics of three-phase photovoltaic (PV) inverters (3P-PVIs) are studied comprehensively based on the operating principles of topologies and with respect to various performance indicators such as semiconductor device count and utilization factors, semiconductor efficiency (SE), dc-bus capacitor and filter inductor voltage/current ripple factors. The evaluation of topologies are based on datasheet parameters and analytical results are pro...
Three-dimensional effects on openings of laterally loaded pierced shear walls
Balkaya, C; Kalkan, E (American Society of Civil Engineers (ASCE), 2004-10-01)
Current design provisions comprise broadly described information for the detailing of reinforcement around the openings of pierced shear walls. To address this deficiency, the load capacity and stress distribution around the openings were analyzed by conducting three-dimensional (3D) nonlinear pushover analyses on typical shear wall dominant building structures. The diaphragm flexibility, behavior of transverse walls and slab-wall interaction during the 3D action were investigated in addition to effects of ...
Three-Dimensional Media for Mobile Devices
Gotchev, Atanas; Akar, Gözde; Capin, Tolga; Strohmeier, Dominik; Boev, Atanas (Institute of Electrical and Electronics Engineers (IEEE), 2011-04-01)
This paper aims at providing an overview of the core technologies enabling the delivery of 3-D Media to next-generation mobile devices. To succeed in the design of the corresponding system, a profound knowledge about the human visual system and the visual cues that form the perception of depth, combined with understanding of the user requirements for designing user experience for mobile 3-D media, are required. These aspects are addressed first and related with the critical parts of the generic system withi...
Three-dimensional flow solutions for non-lifting flows using fast multipole boundary element method
Karban, Uğur; Uzol, Oğuz; Sezer Uzol, Nilay; Department of Aerospace Engineering (2012)
Driving aim of this study was to develop a solver which is accurate enough to be used in analysis and fast enough to be used in optimization purposes. As a first step, a three-dimensional potential flow solver is developed using Fast Multipole Boundary Element (FMBEM) for calculating the pressure distributions in non-lifting flows. It is a steady state solver which uses planar triangular unstructured mesh. After the geometry is introduced, the program creates a prescribed wake surface attached to the traili...
Three-dimensional unstructured grid generation by advancing layer method
Kakaşçı, Uğur; Alemdaroğlu, Nafiz; Oktay, Erdal; Department of Aeronautical Engineering (2001)
Citation Formats
I. Yavuz, “Three-dimensional boundary layer solutions,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr