Dynamic modelling and analysis of split-torque face-gear systems

Download
index.pdf
2022-8-29
Aydoğan, Mustafa Özgür
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
249
views
362
downloads
In this study it is aimed to develop a dynamic model for a face-gear drive system that accounts for all important physical parameters related to the operation to achieve an optimized split-torque face-gear based transmission system. With this new model, nonlinear dynamic response of a face-gear drive system is sought and dynamic stability and limit states of this structure are investigated. The main motivation for the current study is the recent development and utilization of face-gear drive systems in the helicopter industry. Face-gear drive systems are subject of many research studies for the past 30 years. However, mesh stiffness of the face-gear is not modelled accurately. In this study, a nonlinear dynamic model of a multi-mesh involute spur pinion driven face-gear split-torque drive system is developed. A lumped mass system consisting of five pinions and two face gears is constructed. The system has seven rotational degrees of freedom. All pinion and gear blanks are assumed to be rigid disks. The constructed split-torque model includes two input, two output and three idler gears. The mesh parameters, i.e., mesh stiffness and mesh damping, have time varying characteristics. The model includes clearance-type nonlinearity for backlash. The proposed model calculates the time varying mesh stiffness of the gear pair from the generated point clouds of the face-gear and spur-gear pair by using the finite strip method (FSM). The nonlinear equations of motion are solved with Harmonic Balance Method (HBM) for periodic steady state response of the system. The accuracy of the results is compared with direct numerical integration solutions. The stability is checked with Floquet Theory and bifurcation diagrams from Poincare Sections. The effects of mesh phasing between each pinion and face-gear engagement, the effect of static torque and the effects of backlash variations to the response of the system are sought. The effect of subharmonic motion on the dynamic response is demonstrated. Also, torque-split characteristics of the system has been sought.
Nonlinear dynamics of face-gear drive systems, Nonlinear gear dynamics, Split-torque, Helicopter rotor drive system, Finite strip method
https://hdl.handle.net/11511/99409
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Position estimation for timing belt drives of precision machinery using structured neural networks
KILIÇ, Ergin; DOĞRUER, CAN ULAŞ; Dölen, Melik; Koku, Ahmet Buğra (2012-05-01)
This paper focuses on a viable position estimation scheme for timing-belt drives using artificial neural networks. In this study, the position of a carriage (load) is calculated via a structured neural network topology accepting input from a position sensor on the actuator side of the timing belt. The paper presents a detailed discussion on the source of transmission errors. The characteristics of the error in different operation regimes are exploited to construct different network topologies. That is, a re...
Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs using a Gear Dynamics based Approach
ÖZTÜRK, YALIN; Ciğeroğlu, Ender; Özgüven, Hasan Nevzat (2015-08-05)
A gear tooth profile optimization study is performed with the target being defined as the maximization of tooth bending fatigue life for a selected operational range, where the operating torque and speed ranges are defined along with their corresponding durations. For this purpose, a nonlinear lumped gear dynamics model is combined with the S/N curve of the gear material in order to estimate tooth bending fatigue life of the spur gear pair. The differences between the predicted lives of the optimally modifi...
Performance Calculation of SR Motors for Optimum Design and a Washing Machine Application
Ertan, Hulusi Bülent (2008-09-09)
This paper aims to develop an approach for performance calculation of an SR motor, which is suitable for use within mathematical design optimization. For this reason the requirement is to develop procedures, which are both accurate and fast. The procedures adopted here rely on flux-linkage-current-position curves of the motor. A series of tests are carried out on a test motor. The results are compared with estimations from the developed algorithms. It is shown that the current waveform, torque-speed curve, ...
Multi-physics design optimisation of a GaN-based integrated modular motor drive system
UĞUR, MESUT; Keysan, Ozan (2019-06-01)
Here, a multi-physics approach is presented for the design optimisation of an integrated modular motor drive (IMMD). The system is composed of a modular permanent magnet synchronous motor (PMSM) and a GaN-based modular motor drive power stage. The multi-physics model includes motor drive inverters and DC-link capacitor bank (electrical model), stator windings and rotor magnets (electromagnetic model), heat sink (thermal model), and a geometrical model. The main purpose of the design optimisation is to obtai...
Computational Design and Analysis of Efficient Couplers for Nano-optical Links
Altinoklu, A.; Ergül, Özgür Salih (2019-01-01)
We present rigorous optimization and design of efficient couplers to improve optical transmission along nanowires. It is well-known that nanowires are excellent tools to transmit electromagnetic power in nano-optical systems, while couplers become inevitable at critical locations, particularly in input/output regions and at corners if nanowires are bended. We use genetic algorithms supported by fast full-wave solutions to efficiently and accurately obtain effective couplers in alternative scenarios. The des...
Citation Formats
M. Ö. Aydoğan, “Dynamic modelling and analysis of split-torque face-gear systems,” Ph.D. - Doctoral Program, Middle East Technical University, 2022.
METU IIS - Integrated Information Service open@metu.edu.tr