Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/66706
Título: | Screwing process analysis using multivariate statistical process control |
Autor(es): | Teixeira, Humberto Nuno Lopes, Isabel da Silva Braga, A. C. Delgado, Pedro Martins, Cristina |
Palavras-chave: | Multivariate statistical process control (MSPC) Principal component analysis (PCA) Screwing process |
Data: | 2019 |
Editora: | Elsevier B.V. |
Revista: | Procedia Manufacturing |
Citação: | Teixeira, H. N., Lopes, I., Braga, A. C., Delgado, P., & Martins, C. (2019). Screwing process analysis using multivariate statistical process control. Procedia Manufacturing. Elsevier BV. http://doi.org/10.1016/j.promfg.2020.01.176 |
Resumo(s): | Screws are widely used for parts joining in industry. The definition of effective monitoring strategies for screwing processes can help to prevent or significantly reduce ineffective procedures, defective screwing and downtime. Monitoring several correlated variables simultaneously in order to detect relevant changes in manufacturing processes is an increasingly frequent practice furthered by advanced data acquisition systems. However, the monitoring approaches currently used do not consider the multivariate nature of the screwing processes. This paper presents the results of a study performed in an automotive electronics assembly line. Screwing process data concerning torque and rotation angle were analyzed using multivariate statistical process control based on principal component analysis (MSPC-PCA). The main purpose was to extract relevant information from a high number of correlated variables in order to early detect undesirable changes in the process performance. A PCA model was defined based on three principal components. The physical meaning of each component was identified, and underlying causes were inferred based on technical knowledge about the process. Monitoring tools, such as score plots and multivariate control charts allowed to detect the defective screwing cases included in the analyzed data set. Furthermore, eight periods of instability were identified. Considering that the out-of-control signals detected in these periods mainly correspond to delays at the beginning of the tightening operation, four potential causes to explain this behavior were ascertained and analyzed. This research allowed to acquire a deeper understanding on the screwing process behavior and about the causes with higher impact on its stability. Due to its flexibility and versatility, it is considered that this approach can be applied to effectively monitor screwing p |
Tipo: | Artigo em ata de conferência |
URI: | https://hdl.handle.net/1822/66706 |
DOI: | 10.1016/j.promfg.2020.01.176 |
ISSN: | 2351-9789 |
Versão da editora: | https://www.sciencedirect.com/science/article/pii/S2351978920301773 |
Arbitragem científica: | yes |
Acesso: | Acesso aberto |
Aparece nas coleções: | CAlg - Artigos em revistas internacionais / Papers in international journals |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
2019_Screwing process analysis using multivariate statistical process.pdf | 7,31 MB | Adobe PDF | Ver/Abrir |
Este trabalho está licenciado sob uma Licença Creative Commons