Title:
Competitive Adsorption of Poly(1-vinylpyrrolidone-co-styrene) and Kymene onto Wood Fibers: the Improved Effect of Sequential Adsorption
Competitive Adsorption of Poly(1-vinylpyrrolidone-co-styrene) and Kymene onto Wood Fibers: the Improved Effect of Sequential Adsorption
Author(s)
Maurer, Ronald W.
Advisor(s)
Hsieh, Jeffery S.
Editor(s)
Collections
Supplementary to
Permanent Link
Abstract
Non-ionic copolymers, such as poly(1-vinylpyrrolidone-co-styrene), are used in the production of filtration membranes and fibers because of their ability to provide both hydrophilic and hydrophobic character. However, their non-ionic character and solubility in water prevents inexpensive recovery from waste streams. Wood fibers show potential as recovery agents because they are inexpensive, environmentally friendly, and have a large surface area per unit mass (200 m2/g). However, due to the anionic nature of the fiber surface, their adsorptive behavior is often limited to cationic species. We have shown that low-dosage application of a cationic polyamide epichlorohydrin resin, Kymene 557H®, using a sequential adsorption process can alter the fiber surface charge so as to provide more neutral surface area for the non-ionic polymer to adsorb; furthermore, the adsorbed Kymene 557H® does not block the approach of poly(1-vinylpyrrolidone-co-styrene). Single-component adsorption of poly(1-vinylpyrrolidone-co-styrene) was on the order of 10-3 g/g; with Kymene 557H® adsorbed on the fiber, the adsorption increased one order of magnitude to 10-2 g/g. This significant increase is caused by neutralization of fiber surface charge via Kymene 557H® adsorption, creating a surface more favorable for adsorption and recovery of non-ionic species.
Sponsor
Date Issued
2006-08-25
Extent
2474893 bytes
Resource Type
Text
Resource Subtype
Thesis