Title:
Reconstruction techniques for fixed 3-D lines and fixed 3-D points using the relative pose of one or two cameras
Reconstruction techniques for fixed 3-D lines and fixed 3-D points using the relative pose of one or two cameras
Author(s)
Kalghatgi, Roshan Satish
Advisor(s)
Sadegh, Nader
Editor(s)
Collections
Supplementary to
Permanent Link
Abstract
In general, stereovision can be defined as a two part problem. The first is the correspondence problem. This involves determining the image point in each image of a set of images that correspond to the same physical point P. We will call this set of image points, N. The second problem is the reconstruction problem. Once a set of image points, N, that correspond to point P has been determined, N is then used to extract three dimensional information about point P.
This master's thesis presents three novel solutions to the reconstruction problem. Two of the techniques presented are for detecting the location of a 3-D point and one for detecting a line expressed in a three dimensional coordinate system. These techniques are tested and validated using a unique 3-D finger detection algorithm. The techniques presented are unique because of their simplicity and because they do not require the cameras to be placed in specific locations, orientations or have specific alignments. On the contrary, it will be shown that the techniques presented in this thesis allow the two cameras used to assume almost any relative pose provided that the object of interest is within their field of view.
The relative pose of the cameras at a given instant in time, along with basic equations from the perspective image model are used to form a system of equations that when solved, reveal the 3-D coordinates of a particular fixed point of interest or the three dimensional equation of a fixed line of interest. Finally, it will be shown that a single moving camera can successfully perform the same line and point detection accomplished by two cameras by altering the pose of the camera.
The results presented in this work are beneficial to any typical stereovision application because of the computational ease in comparison to other point and line reconstruction techniques. But more importantly, this work allows for a single moving camera to perceive three-dimensional position information, which effectively removes the two camera constraint for a stereo vision system. When used with other monocular cues such as texture or color, the work presented in this thesis could be as accurate as binocular stereo vision at interpreting three dimensional information. Thus, this work could potentially increase the three dimensional perception of a robot that normally uses one camera, such as an eye-in-hand robot or a snake like robot.
Sponsor
Date Issued
2012-01-18
Extent
Resource Type
Text
Resource Subtype
Thesis