Comparação da resistencia mecanica a flexão da fixação interna rigida atraves do uso de parafusos metalicos e reabsorviveis na osteotomia sagital do ramo mandibular : estudo in vitro
Rubens Guimarães Filho
TESE
Português
(Broch.)
T/UNICAMP G947c
Piracicaba, SP : [s.n.], 2003.
95f. : il.
Orientador : Renato Mazzonetto
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Resumo: O propósito deste trabalho foi avaliar a resistência biomecânica a flexão de dois sistemas utilizados para fixação interna rígida. O estudo foi realizado em 20 hemimandíbulas frescas de carneiro, divididos em 2 grupos com 10 hemimandíbulas em cada. Todas as hemimandíbulas foram submetidas a...
Ver mais
Resumo: O propósito deste trabalho foi avaliar a resistência biomecânica a flexão de dois sistemas utilizados para fixação interna rígida. O estudo foi realizado em 20 hemimandíbulas frescas de carneiro, divididos em 2 grupos com 10 hemimandíbulas em cada. Todas as hemimandíbulas foram submetidas a osteotomia sagital do ramo seguindo-se um avanço de 5 mm. As amostras foram mensuradas para se evitar discrepâncias entre as mesmas. O grupo A foi fixado com três parafusos reabsorvíveis de 2,0 x 12 mm (Sionx Implants®, Tampere, Finlândia), inseridos de modo posicional e na configuração de "L" invertido. O mesmo se sucedeu no grupo S, onde foram utilizados parafusos metálicos (Osteomed® CO. Addison, Texas - Estados Unidos), com as mesmas dimensões e forma. Os resultados demonstraram não haver diferenças estatisticamente significantes entre os grupos testados. O sistema reabsorvível testado demonstrou ser uma alternativa viável quando comparado ao sistema metálico
Ver menos
Abstract: The purpose of this study was to evaluate the flexion biomechanical resistance of two internal rigid fixation systems. The study which were mechanically tested in twenty sheep's hemimandibles, divided in two groups of ten in each. All mandibles were subjected to a ramus sagittal split...
Ver mais
Abstract: The purpose of this study was to evaluate the flexion biomechanical resistance of two internal rigid fixation systems. The study which were mechanically tested in twenty sheep's hemimandibles, divided in two groups of ten in each. All mandibles were subjected to a ramus sagittal split osteotomy, followed by an advancement of 5 mm. The samples were measured to avoid discrepancies between them. Group A were fixed by three reabsorbable screws of 2.0 X 12 mm (Bionx Implants®, Tampere, Finland), inserted in positional way and disposed in inverted "L". The same happened in-group B, which were used metallic screws
(Osteomed® CO. Addison, Texas - USA), with the same dimensions and design. The results showed no significant statistical difference between the groups. The reabsorbable system tested proved to be a viable alternative when compared to the metallic one Ver menos
(Osteomed® CO. Addison, Texas - USA), with the same dimensions and design. The results showed no significant statistical difference between the groups. The reabsorbable system tested proved to be a viable alternative when compared to the metallic one Ver menos
Mazzonetto, Renato, 1968-2011
Orientador
Moraes, Marcio de, 1966-
Avaliador
Niccoli Filho, Walter Domingos
Avaliador
Raldi, Fernando Vagner
Avaliador
Comparação da resistencia mecanica a flexão da fixação interna rigida atraves do uso de parafusos metalicos e reabsorviveis na osteotomia sagital do ramo mandibular : estudo in vitro
Rubens Guimarães Filho
Comparação da resistencia mecanica a flexão da fixação interna rigida atraves do uso de parafusos metalicos e reabsorviveis na osteotomia sagital do ramo mandibular : estudo in vitro
Rubens Guimarães Filho
Exemplares
Nº de exemplares: 1
Não existem reservas para esta obra