No full text
Article (Scientific journals)
Macroporous ceramics: Novel route using partial sintering of alumina-powder agglomerates obtained by spray-drying
Jean, Guillaume; Sciamanna, Valérie; Demuynck, Maryse et al.
2014In Ceramics International
Peer Reviewed verified by ORBi
 

Files


Full Text
No document available.

Send to



Details



Keywords :
[en] Partial sintering; [en] Alumina; [en] Porous ceramics; [en] SPS
Abstract :
[en] This paper presents a new method for manufacturing macroporous ceramics by partial sintering of controlled ceramic powder agglomerates packing. Using this route, the final ceramic material is characterized by a hierarchical porous network that can contain up to three levels of interconnected pores: (i) the voids existing between the agglomerates (typically ≥10 µm in size), (ii) the porosity remaining inside the agglomerates after partial sintering (typically ≈100-1000 nm in size), (iii) the pores that may exist within the initial ceramic particles (typically <100 nm in size). Such porous ceramic structures are developed to be applied in the fields of fluid transfer/mixing, catalysis or filtration. This paper reports the first results obtained by applying this process to α-alumina granules obtained by spray drying. Conventional sintering, with or without load, and spark plasma sintering are used. It is shown that minimum load must be applied on the granules packing during sintering in order to achieve a satisfactory 'bridging' at the contact points: the lower the maximum sintering temperature, the higher the pressure to apply. This makes it not possible to obtain specimens with high bimodal porosity level and good mechanical resistance by conventional sintering. On the opposite, by using SPS it is possible to lower the temperature and the load applied during sintering while keeping sufficient mechanical performances. A porous ceramic exhibiting a bimodal porosity level of 52 vol% and a compressive strength of 30 MPa has been obtained.
Research center :
CRIM - Ingénierie des matériaux
Disciplines :
Materials science & engineering
Author, co-author :
Jean, Guillaume ;  Université de Mons > Faculté Polytechnique > Science des Matériaux
Sciamanna, Valérie ;  Université de Mons > Faculté Polytechnique > Science des Matériaux
Demuynck, Maryse
Cambier, Francis
Gonon, Maurice ;  Université de Mons > Faculté Polytechnique > Science des Matériaux
Language :
English
Title :
Macroporous ceramics: Novel route using partial sintering of alumina-powder agglomerates obtained by spray-drying
Publication date :
27 February 2014
Journal title :
Ceramics International
ISSN :
0272-8842
Publisher :
Elsevier, United Kingdom
Peer reviewed :
Peer Reviewed verified by ORBi
Research unit :
F502 - Science des Matériaux
Research institute :
R400 - Institut de Recherche en Science et Ingénierie des Matériaux
Available on ORBi UMONS :
since 29 April 2014

Statistics


Number of views
0 (0 by UMONS)
Number of downloads
0 (0 by UMONS)

Scopus citations®
 
35
Scopus citations®
without self-citations
35
OpenCitations
 
30

Bibliography


Similar publications



Contact ORBi UMONS