Dornfeld D, Min S, Takeuchi Y. Recent Advances in Mechanical Micromachining. CIRP Ann 2006;55:745–68.
Bissacco G, Hansen HN, De Chiffre L. Micromilling of hardened tool steel for mould making applications. J Mater Process Technol 2005;167:201–7.
Bissacco G, Hansen HN, De Chiffre L. Size Effects on Surface Generation in Micro Milling of Hardened Tool Steel. CIRP Ann 2006;55:593–6.
Liu X, DeVor RE, Kapoor SG, Ehmann KF. J Manuf Sci Eng 2004;126:666–78.
Ducobu F, Rivière-Lorphèvre E, Filippi E. Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. Eur J Mech ASolids 2016;59:58–66.
Shuang F, Ma W. Procedia CIRP 2019;82:267–72.
Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proc. 7th Int. Symp. Ballist., vol. 21, The Hague, The Netherlands: 1983, p. 541–7.
Seo S, Min O, Yang H. Constitutive equation for Ti–6Al–4V at high temperatures measured using the SHPB technique. Int J Impact Eng 2005;31:735–54.
Rech J, Arrazola PJ, Claudin C, Courbon C, Pusavec F, Kopac J. Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting. CIRP Ann 2013;62:79–82.
Wojciechowski S, Matuszak M, Powałka B, Madajewski M, Maruda RW, Królczyk GM. Prediction of cutting forces during micro end milling considering chip thickness accumulation. Int J Mach Tools Manuf 2019;147:103466.
Ducobu F, Rivière-Lorphèvre E, Filippi E. Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. Int J Mater Form 2015;8:455–68. .
Liu K, Melkote SN. Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process. Int J Mech Sci 2007;49:650–60.
Ducobu F, Rivière-Lorphèvre E, Filippi E. Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica 2017;52:1577–92.