P. Arrazola, and T. Özel Investigations on the effects of friction modeling in finite element simulation of machining Int. J. Mech. Sci. 52 2010 31 42
P.J. Arrazola, A. Villar, D. Ugarte, and S. Marya Serrated chip prediction in finite element modeling of the chip formation process Mach. Sci. Technol. 11 2007 1 24
P.J. Arrazola, D. Ugarte, and X. Dominguez A new approach for the friction identification during machining through the use of finite element modeling Int. J. Mach. Tools Manuf. 48 2008 173 183
P. Arrazola, T. Özel, D. Umbrello, M. Davies, and I. Jawahir Recent advances in modelling of metal machining processes CIRP Ann. Manuf. Technol. 62 2013 695 718
P. Arrazola, A. Kortabarria, A. Madariaga, J. Esnaola, E. Fernandez, C. Cappellini, D. Ulutan, and T. Özel On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation Simul. Model. Pract. Theory 41 2014 87 103
M. Bäker, J. Rosler, and C. Siemers A finite element model of high speed metal cutting with adiabatic shearing Comput. Struct. 80 2002 495 513
D. Benson, and S. Okazava Contact in a multi-material eulerian finite element formulation Comput. Methods Appl. Mech. Eng. 193 2004 4277 4298
M. Calamaz, D. Coupard, and F. Girot A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V Int. J. Mach. Tools Manuf. 48 2008 275 288
M. Calamaz, D. Coupard, and F. Girot Numerical simulation of titanium dry machining with a strain softening constitutive law Mach. Sci. Technol. 14 2010 244 257
G. Chen, C. Ren, X. Yang, X. Jin, and T. Guo Finite element simulation of high-speed machining of titanium alloy (ti-6al-4v) based on ductile failure model Int. J. Adv. Manuf. Technol. 56 2011 1027 1038
G. Cocchetti, M. Pagani, and U. Perego Selective mass scaling and critical time-step estimate for explicit dynamics analyses with solid-shell elements Comput. Struct 127 2012 39 52 10.1016/j.compstruc.2012.10.021
C. Courbon, T. Mabrouki, J. Rech, D. Mazuyer, and E. D'Eramod On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: Formation mechanisms and influence on the cutting process Appl. Therm. Eng. 50 2013 1311 1325
J. Davim Machining: Fundamentals and Recent Advances 2008 Springer
J.P. Davim Statistical and Computational Techniques in Manufacturing 2012 Springer
J.P. Davim, and C. Maranhão A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis Mat. Des. 30 2009 160 165
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting Int. J. Mech. Sci. 81 2014 77 87
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine Int. J. Mater. Form. 8 2015 455 468
F. Ducobu, P.-J. Arrazola, E. Rivière-Lorphèvre, and E. Filippi Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling Key Eng. Mater. 651-653 2015 1197 1203
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting Simul. Model. Pract. Theory 53 2015 1 14
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition Int. J. Mech. Sci. 107 2016 136 149
H. Ghadbeigi, S. Bradbury, C. Pinna, and J. Yates On the modelling of chip formation in orthogonal cutting: Damage mechanics approach Proceedings of the 12th CIRP Conference on Modeling of Machining Operations 2009 77 82
M. Heinstein, and D. Segalman Simulation of Orthogonal Cutting with Smooth Particle Hydrodynamics Technical Report 1997 Sandia National laboratories
G.Q.S. Henke, and J. Grabe Application of a coupled eulerian-lagrangian approach on geomechanical problems involving large deformations Comput. Geotech. 38 2011 30 39
H.K.S. Abaqus Analysis User's Manual, Version 6.11 2011 Dassault Systèmes
M. Jackson, M. Whitfield, J. Morrell, and J.P. Davim Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting Int. J. Mater. Prod. Technol. 37 2010 2 29
G. Johnson, and W. Cook A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures Proceedings of the Seventh International Symposium on Ballistics, the Hague, The Netherlands 1983 541 547
S. Lampman Wrought titanium and titanium alloys, properties and selection: Nonferrous alloys and special-purpose materials, ASM Handbook ASM Int. 2 1990 592 633
K. Li, X.-L. Gao, and J. Sutherland Finite element simulation of the orthogonal metal cutting process for qualitative understanding of the effects of crater wear on the chip formation process J. Mater. Process. Technol. 127 2002 309 324
T. Mabrouki, and J.-F. Rigal A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning J. Mater. Process. Technol. 176 2006 214 221
C. Maranhão, and J.P. Davim Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation Simul. Model. Pract. Theory 18 2010 139 156
H. Meyer, and D. Kleponis Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration Int. J. Impact Eng. 26 2001 509 521
M. Miguèlez, X. Soldani, and A. Molinari Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy Int. J. Mech. Sci. 75 2013 212 222
M. Nasr, E.-G. Ng, and M. Elbestawi Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivity Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 221 2007 1387 1400
T. Obikawa, H. Sasahara, T. Shirakashi, and E. Usui Application of computational machining method to discontinuous chip formation J. Manuf. Sci. Eng. 119 1997 667 674
Y. Ohbuchi, and T. Obikawa Finite element modeling of chip formation in the domain of negative rake angle cutting ASME 125 2003 324 332
L. Olovsson, K. Simonsson, and M. Unosson Selective mass scaling for explicit finite element analyses Int. J. Numer. Meth. Eng. 63 2005 1436 1445
D.R.J. Owen, and M. Vaz Jr Computational techniques applied to high-speed machining under adiabatic strain localization conditions Comput. Methods Appl. Mech. Eng. 171 1999 445 461
T. Özel, and E. Zeren Finite element method simulation of machining of AISI 1045 steel with a round edge cutting tool Proceedings of 8th CIRP International Workshop on Modeling of Machining Operations 2005 533 542
T. Özel, and E. Zeren Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining Int. J. Adv. Manuf. Technol. 35 2007 255 267
T. Özel, and E. Zeren Numerical modelling of meso-scale finish machining with finite edge radius tools Int. J. Mach. Mach. Mater. 2 2007 451 768
O. Pantalé Plateforme de prototypage virtuel pour la simulation numrique en Grandes Transformations Thermomcaniques Rapides Technical Report 2005 Institut National Polytechnique de Toulouse
O. Pantalé, J.-L. Bacaria, O. Dalverny, R. Rakotomalala, and S. Caperaa 2D and 3D numerical models of metal cutting with damage effects Comput. Methods Appl. Mech. Eng. 193 2004 4383 4399
A.M. Prior Application of implicit and explicit finite element techniques to metal forming J. Mater. Process. Technol. 45 1994 649 656
H. Puls, F. Klocke, and D. Lung Experimental investigation on friction under metal cutting conditions Wear 310 2014 63 71
J. Rech, P. Arrazola, C. Claudin, C. Courbon, F. Pusavec, and J. Kopac Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting CIRP Ann. Manuf. Technol. 62 2013 79 82
V. Schulze, and F. Zanger Development of a simulation model to investigate tool wear in Ti-6-Al-4V alloy machining Adv. Mater. Res. 223 2011 535 544
SECO TOOLS Turning Catalog and Technical Guide 2012 2011 SECO TOOLS AB
A. Simoneau, E. Ng, and M. Elbestawi Chip formation during microscale cutting of medium carbon steel Int. J. Mach. Tools Manuf. 46 2006 467 481
A. Simoneau, E. Ng, and M. Elbestawi Grain size and orientation effects when microcutting AISI 1045 steel Ann. CIRP 56 2007 57 60
A. Skrzat Application of coupled eulerian-lagrangian approach in metal forming simulations Mechanika 294 2012 25 35
I. Smojver, and D. Ivancevic Bird strike damage analysis in aircraft structures using abaqus/explicit and coupled eulerian lagrangian approach Compos. Sci. Technol. 71 2011 489 498
S. Subbiah, and S. Melkote Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024-T3 Mater. Sci. Eng. A 474 2008 283 300
J. Sun, and Y.B. Guo Material flow stress and failure in multiscale machining titanium alloy Ti-6Al-4V Int. J. Adv. Manuf. Technol. 41 2009 651 659
S. Sun, M. Brandt, and M. Dargusch Characteristics of cutting forces and chip formation in machining of titanium alloys Int. J. Mach. Tools Manuf. 49 2009 561 568
H. Toenshoff, and B. Denkena Basics of Cutting and Abrasive Processes 2013 Springer Verlag
D. Umbrello Finite element simulation of conventional and high speed machining of Ti6Al4V alloy J. Mater. Process. Technol. 196 2008 79 87
K. Woon, M. Rahman, F. Fang, K. Neo, and K. Liu Investigations of tool edge radius effect in micromachining: A FEM simulation approach J. Mater. Process. Technol. 167 2007 316 337
J. Yvonnet Nouvelles approches sans maillage bases sur le mthode des lments naturels pour la simulation numrique des procds de mise en forme Ph.D. thesis 2004 cole Nationale Suprieure d'Arts et Mtiers Centre de Paris
Y. Zhang, T. Mabrouki, D. Nelias, and Y. Gong FE-model for titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface Int. J. Mater. Form. 4 2011 11 23
Y. Zhang, T. Mabrouki, D. Nelias, and Y.D. Gong Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach Finite Elem. Anal. Des. 47 2011 850 863