[en] Tungsten oxide (WO3) sensitive layers for NO2 sensors were fabricated by atmospheric plasma spraying technique followed by a heat-treatment. The phase structure and microstructure of the as-sprayed and heat-treated coatings were characterized by X-ray diffraction and scanning electron microscope. The sensing characteristics of these sensors were obtained by measuring the response towards NO2 in moist air with a concentration in the range of 0-450 ppb and at a working temperature in the range of 95-240 °C. The results showed that the WO3 coating prepared with low temperature plasma (Ar plasma) had a better sensitivity than the one deposited with high temperature plasma (Ar-H2 plasma) due to a more porous structure. The obtained WO3 sensors were found to exhibit different sensing behaviors depending on the working temperature and NO2 concentration. The electrical resistance of WO3 sensor increased at high NO2 concentration in moist air and at a low working temperature. Whereas, it was found that the resistance decreased when the NO2 concentration was lower than 93 ppb and the working temperature was higher than 130 °C.
Disciplines :
Computer science Materials science & engineering
Author, co-author :
Zhang, Chao ; Université de Mons > Faculté Polytechnique > Science des Matériaux
Debliquy, Marc ; Université de Mons > Faculté Polytechnique > Science des Matériaux
Boudiba, Abdelhamid ; Université de Mons > Faculté Polytechnique > Science des Matériaux
Liao, Hanlin
Coddet, Christain
Language :
English
Title :
Sensing properties of atmospheric plasma-sprayed WO3 coating for sub-ppm NO2 detection
Publication date :
29 January 2010
Journal title :
Sensors and Actuators. B, Chemical
ISSN :
0925-4005
Publisher :
Elsevier Sequoia, Lausanne, Switzerland
Volume :
144
Issue :
1
Pages :
280
Peer reviewed :
Peer Reviewed verified by ORBi
Research unit :
F502 - Science des Matériaux
Research institute :
R400 - Institut de Recherche en Science et Ingénierie des Matériaux
Yamazoe N., and Miura N. Environmental gas sensing. Sens. Actuators B 20 (1994) 95-102
Inoue T., Ohtsuka K., Yoshida Y., Matsuura Y., and Kajiyama Y. Metal oxide semiconductor NO2 sensor. Sens. Actuators B 24-25 (1995) 388-391
Shen G., Chen P.C., Ryu K., and Zhou C. Devices and chemical sensing applications of metal oxide nanowires. J. Mater. Chem. 19 (2009) 828-839
Zhao Y., Feng Z.-C., and Liang Y. Pulsed laser deposition of WO3-base film for NO2 gas sensor application. Sens. Actuators B 66 (2000) 171-173
Cantalini C., Sun H.T., Faccio M., Pelino M., Santucci S., Lozzi L., and Passacantando M. NO2 sensitivity of WO3 thin film obtained by high vacuum thermal evaporation. Sens. Actuators B 31 (1996) 81-87
Jimenez I., Arbiol J., Dezanneau G., Cornet A., and Morant J.R. Crystalline structure, defects and gas sensor response to NO2 and H2S of tungsten trioxide nanopowders. Sens. Actuators B 93 (2003) 475-485
Rout C.S., Hegde M., and Rao C.N.R. H2S sensors based on tungsten oxide nanostructures. Sens. Actuators B 128 (2008) 488-493
Yao K., Caruntu D., Zeng Z., Chen J., O'onnor C.J., and Zhou W. Parts per billion-level H2S detection at room temperature based on self-assembled In2O3 nanoparticles. J. Phys. Chem. C 113 (2009) 14812-14817
Srivastava V., and Jain K. Highly sensitive NH3 sensor using Pt catalyzed silica coating over WO3 thick films. Sens. Actuators B 133 (2008) 46-52
Wang X., Miura N., and Yamazoe N. Study of WO3-based sensing materials for NH3 and NO detection. Sens. Actuators B 66 (2000) 74-76
Wang X., Sakai G., Shimanoe K., Miura N., and Yamazoe N. Spin-coated thin films of SiO2-WO3 composites for detection of sub-ppm NO2. Sens. Actuators B 45 (1997) 141-146
Reyes L.F., Saukko S., Hoel A., Lantto V., and Granqvist C.G. Structure engineering of WO3 nanoparticles for porous film applications by advanced reactive gas deposition. J. Eur. Ceram. Soc. 24 (2004) 1415-1419
Tao W.-H., and Tsai C.-H. H2S sensing properties of noble metal doped WO3 thin film sensor fabricated by micromachining. Sens. Actuators B 81 (2002) 237-247
Galatsis K., Li Y.X., Wlodarski W., Comini E., Sberveglieri G., Cantalini C., Santucci S., and Passacantando M. Comparison of single and binary oxide MoO3, TiO2 and WO3 sol-gel gas sensors. Sens. Actuators B 83 (2002) 276-280
Francioso L., Russo M., Taurino A.M., and Siciliano P. Micrometric patterning process of sol-gel SnO2, In2O3 and WO3 thin film for gas sensing applications: towards silicon technology integration. Sens. Actuators B 119 (2006) 159-166
Shieh J., Feng H.M., Hon M.H., and Juang H.Y. WO3 and W-Ti-O thin-film gas sensors prepared by sol-gel dip-coating. Sens. Actuators B 86 (2002) 75-80
Tracy C.E., and Benson D.K. Preparation of amorphous electrochromic tungsten oxide and molybdenum oxide by plasma enhanced chemical vapor deposition. J. Vac. Sci. Technol. A 4 (1986) 2377-2383
Khatko V., Vallejos S., Calderer J., Llobet E., Vilanova X., and Correig X. Gas sensing properties of WO3 thin films deposited by rf sputtering. Sens. Actuators B 126 (2007) 400-405
Liu Z., Yamazaki T., Shen Y., Kikuta T., and Nakatani N. Influence of annealing on microstructure and NO2-sensing properties of sputtered WO3 thin films. Sens. Actuators B 128 (2007) 173-178
Lozzi L., Ottaviano L., Passacantando M., Santucci S., and Cantalini C. The influence of air and vacuum thermal treatments on the NO2 gas sensitivity of WO3 thin films prepared by thermal evaporation. Thin Solid Films 391 (2001) 224-228
Akiyama M., Tamaki J., Miura N., and Yamazoe N. Tungsten oxide-based semiconductor sensor highly sensitive to NO and NO2. Chem. Lett. 20 (1991) 1611-1614
Tamaki J., Hayashi A., Yamamoto Y., and Matsuoka M. Detection of dilute nitrogen dioxide and thickness effect of tungsten oxide thin film sensors. Sens. Actuators B 95 (2003) 111-115
Kida T., Nishiyama A., Yuasa M., Shimanoe K., and Yamazoe N. Highly sensitive NO2 sensors using lamellar-structured WO3 particles prepared by an acidification method. Sens. Actuators B 135 (2009) 568-574
Lee J.-H. Gas sensors using hierarchical and hollow oxide nanostructures: overview. Sens. Actuators B 140 (2009) 319-336
Teoh L.G., Hon Y.M., Shieh J., Lai W.H., and Hon M.H. Sensitivity properties of a novel NO2 gas sensor based on mesoporous WO3 thin film. Sens. Actuators B 96 (2003) 219-225
Jiménez I., Arbiol J., Dezanneau G., Cornet A., and Morante J.R. Crystalline structure, defects and gas sensor response to NO2 and H2S of tungsten trioxide nanopowders. Sens. Actuators B 93 (2003) 475-485
Chung Y.-K., Kim M.-H., Um W.-S., Lee H.-S., Song J.-K., Choi S.-C., Yi K.-M., Lee M.-J., and Chung K.-W. Gas sensing properties of WO3 thick film for NO2 gas dependent on process condition. Sens. Actuators B 60 (1999) 49-56
Mcpherson R. A review of microstructure and properties of plasma sprayed ceramic coatings. Surf. Coat. Technol. 39-40 (1989) 173-181
A. Proner, Revêtements par projection thermique, Techniques de l'ingénieur, MD M 1645, 1999, pp. 1-20 (in French).
Li C.-J., Ohmori A., and McPherson R. The relationship between microstructure and Young's modulus of thermally sprayed ceramic coatings. J. Mater. Sci. 32 (1997) 997-1004
Kuroda S. Properties and characterization of thermal sprayed coatings-a review of recent research progress. In: Coddet C. (Ed). Thermal Spray 1998: Meeting the Challenges of the 21st Century (1998), ASM International, Materials Park, OH 539-550
E. HECQ, Etude et réalisation de couches minces de trioxyde de tungstène pour la détection de NO2, Thesis of TFE, Faculté Polytechnique de Mons, 2004 (in French).
Ladouceur M., Dodelet J.P., Parent L., and Dallaire S. Plasma spraying of WO3 structural characterization of the coatings. Thin Solid Films 16 (1998) 249-254
Ladouceur M., Dodelet J.P., Gourillon T., Parent L., and Dallaire S. Plasma-sprayed semiconductor electrodes: photoelectrochemical characterization and NH3 photoproduction by substoichiometric tugsten oxides. J. Phys. Chem. 94 (1990) 4579-4587
McPherson R. The enthalpy of formation of aluminium Titanate. J. Mater. Sci. 8 (1973) 851-858
Zhang C., Kanta A.-F., Li C.-X., Li C.-J., Planche M.-P., Liao H., and Coddet C. Effect of in-flight particle characteristics on the coating properties of atmospheric plasma-sprayed 8 mol% Y2O3-ZrO2 electrolyte coating studying by artificial neural networks. Surf. Coat. Technol. 204 (2009) 463-469
McPherson R. The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings. Thin Solid Films 83 (1981) 297-310
Gillet M., Lemire C., Gillet E., and Aguir K. The role of surface oxygen vacancies upon WO3 conductivity. Surf. Sci. 532-535 (2003) 519-525
Aguir K., Lemire C., and Lollman D.B.B. Electrical properties of reactively sputtered WO3 thin films as ozone gas sensor. Sens. Actuators B 84 (2002) 1-5
D. Meng, T. Yamazaki, Y. Shen, Z. Liu, T. Kikuta, Preparation of WO3 nanoparticles and application to NO2 sensor, Appl. Surf. Sci., 2009, doi:10.1016/j.apsusc.2009.05.075.
He X., Li J., Gao X., and Wang L. NO2 sensing characteristics of WO3 thin film microgas sensor. Sens. Actuators B 93 (2003) 463-467
Prasad A.K., Kubinskib D.J., and Goumaa P.I. Comparison of sol-gel and ion beam deposited MoO3 thin film gas sensors for selective ammonia detection. Sens. Actuators B 93 (2003) 25-30
Gurlo A., Sahm M., Oprea A., Barsan N., and Weimar U. A p- to n-transition on α-Fe2O3-based thick film sensors studied by conductance and work function change measurements. Sens. Actuators B 102 (2004) 291-298
Kim Y.-S., Hwang I.-S., Kim S.-J., Lee C.-Y., and Lee J.-H. CuO nanowire gas sensors for air quality control in automotive cabin. Sens. Actuators B 135 (2008) 298-303
Ruhland B., Becker Th., and Müller G. Gas-kinetic interactions of nitrous oxides with SnO2 surface. Sens. Actuators B 50 (1998) 85-94
Siciliano T., Tepore A., Micocci G., Genga A., Siciliano M., and Filippo E. Transition from n- to p-type electrical conductivity induced by ethanol adsorption on α-tellurium dioxide nanowires. Sens. Actuators B 138 (2009) 207-213