[1] O'Regan, B., Grätzel, M., A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353 (1991), 737–740.
[2] Wright, M., Uddin, A., Organic-inorganic hybrid solar cells: a comparative review. Sol. Energy Mater Sol. Cells 107 (2012), 87–111.
[3] Babu, V.J., Vempati, S., Sundarrajan, S., Sireesha, M., Ramakrishna, S., Effective nanostructured morphologies for efficient hybrid solar cells. Sol. Energy 106 (2014), 1–22.
[4] Roy, P., Albu, S.P., Schmuki, P., TiO2 nanotubes in dye-sensitized solar cells: higher efficiencies by well-defined tube tops. Electrochem. Commun. 12 (2010), 949–951.
[5] Luo, J., Liu, C., Yang, S., Cao, Y., Hybrid solar cells based on blends of poly(3-hexylthiophene) and surface dye-modified, ultrathin linear and branched TiO2 nanorods. Sol. Energy Mater. Sol. Cells 94 (2010), 501–508.
[6] Lin, Y.-Y., Chu, T.-H., Li, S.-S., Chuang, C.-H., Chang, C.-H., Su, W.-F., Chang, C.-P., Chu, M.-W., Chen, C.-W., Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells. J. Am. Chem. Soc. 131 (2009), 3644–3649.
[7] Feng, X., Zhu, K., Frank, A.J., Grimes, C.A., Mallouk, T.E., Rapid charge transport in dye-sensitized solar cells made from vertically aligned single-crystal rutile TiO2 nanowires. Angew. Chem. 124 (2012), 2781–2784.
[8] Fabregat-Santiago, F., Barea, E.M., Bisquert, J., Mor, G.K., Shankar, K., Grimes, C.A., High carrier density and capacitance in TiO2 nanotube arrays induced by electrochemical doping. J. Am. Chem. Soc. 130 (2008), 11312–11316.
[9] Jennings, J.R., Ghicov, A., Peter, L.M., Schmuki, P., Walker, A.B., Dye-sensitized solar cells based on oriented TiO2 nanotube arrays: transport, trapping, and transfer of electrons. J. Am. Chem. Soc. 130 (2008), 13364–13372.
[10] Snaith, H.J., Schmidt-Mende, L., Advances in liquid-electrolyte and solid-state dye-sensitized solar cells. Adv. Mater. 19 (2007), 3189–3200.
[11] Wang, Q., Xu, Y., Zhang, S., Gao, S., Zheng, Q., Yuan, Q., Rong, W., Yin, C., Wang, J., Wang, M., Self-organized TiO2 nanotube arrays sensitized by uniform Cd0.8Zn0.2S nanoparticles for highly effective photoelectrochemical performance. Mater. Des. 92 (2016), 102–106.
[12] Shinde, P.S., Park, J.W., Mahadik, M.A., Ryu, J., Park, J.H., Yi, Y.-J., Jang, J.S., Fabrication of efficient CdS nanoflowers-decorated TiO2 nanotubes array heterojunction photoanode by a novel synthetic approach for solar hydrogen production. Int. J. Hydrog. Energy 41 (2016), 21078–21087.
[13] Perillo, P., Flexible gas sensor based on TiO2 membrane nanotubes for detection of butylamine. Mater. Today Commun. 7 (2016), 117–121.
[14] Ponnamma, D., Vijayan P, P., Al-Maadeed, M.Al Ali, 3D architectures of titania nanotubes and graphene with efficient nanosynergy for supercapacitors. Mater. Des. 117 (2017), 203–212.
[15] Regonini, D., Bowen, C., Jaroenworaluck, A., Stevens, R., A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes. Mater. Sci. Eng., R 74 (2013), 377–406.
[16] Mor, G.K., Varghese, O.K., Paulose, M., Shankar, K., Grimes, C.A., A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties, and solar energy applications. Sol. Energy Mater. Sol. Cells 90 (2006), 2011–2075.
[17] Hu, N., Gao, N., Chen, Y., Starink, M.J., Achieving homogeneous anodic TiO2 nanotube layers through grain refinement of the titanium substrate. Mater. Des. 110 (2016), 346–353.
[18] So, S., Hwang, I., Schmuki, P., Hierarchical DSSC structures based on single walled TiO2 nanotube arrays reach backside illumination solar light conversion efficiency of 8 %. Energy Environ. Sci. 8 (2015), 849–854.
[19] Seidalilir, Z., Malekfar, R., Wu, H.-P., Shiu, J.-W., Diau, E.W.-G., High-performance and stable gel-state dye-sensitized solar cells using anodic TiO2 nanotube arrays and polymer-based gel electrolytes. ACS Appl. Mater. Interfaces 7 (2015), 12731–12739.
[20] Pang, Q., Leng, L., Zhao, L., Zhou, L., Liang, C., Lan, Y., Dye sensitized solar cells using freestanding TiO2 nanotube arrays on FTO substrate as photoanode. Mater. Chem. Phys. 125 (2011), 612–616.
[21] Li, K.-L., Xie, Z.-B., Adams, S., A reliable TiO2 nanotube membrane transfer method and its application in photovoltaic devices. Electrochim. Acta 62 (2012), 116–123.
[22] Roy, P., Kim, D., Paramasivam, I., Schmuki, P., Improved efficiency of TiO2 nanotubes in dye sensitized solar cells by decoration with TiO2 nanoparticles. Electrochem. Commun. 11 (2009), 1001–1004.
[23] Varghese, O.K., Paulose, M., Grimes, C.A., Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cell. Nat. Nanotechnol. 4 (2009), 592–597.
[24] Kathirvel, S., Su, C., Yang, C.-Y., Shiao, Y.-J., Chen, B.-R., Li, W.-R., The growth of TiO2 nanotubes from sputter-deposited Ti film on transparent conducting glass for photovoltaic applications. Vacuum 118 (2015), 17–25.
[25] Chen, P., Brillet, J., Bala, H., Wang, P., Zakeeruddin, S.M., Grätzel, M., Solid-state dye-sensitized solar cells using TiO2 nanotube arrays on FTO glass. J. Mater. Chem. 19 (2009), 5325–5328.
[26] Grätzel, C., Zakeeruddin, S.M., Recent trends in mesoscopic solar cells based on molecular and nanopigment light harvesters. Mater. Today 16 (2013), 11–18.
[27] Dervaux, J., Cormier, P.-A., Konstantinidis, S., Di Ciuccio, R., Coulembier, O., Dubois, P., Snyders, R., Deposition of porous titanium oxide thin films as anode material for dye sensitized solar cells. Vacuum 114 (2015), 213–220.
[28] Mor, G.K., Varghese, O.K., Paulose, M., Grimes, C.A., Transparent highly ordered TiO2 nanotube arrays via anodization of titanium thin films. Adv. Funct. Mater. 15 (2005), 1291–1296.
[29] Kanta, A.-F., Poelman, M., Decroly, A., Electrochemical characterisation of TiO2 nanotube array photoanodes for dye-sensitized solar cell application. Sol. Energy Mater. Sol. Cells 133 (2015), 76–81.
[30] Albu, S.P., Schmuki, P., Influence of anodization parameters on the expansion factor of TiO2 nanotubes. Electrochim. Acta 91 (2013), 90–95.
[31] Regonini, D., Satkab, A., Jaroenworaluck, A., Allsopp, D., Bowen, C., Stevens, R., Factors influencing surface morphology of anodized TiO2 nanotubes. Electrochim. Acta 74 (2012), 244–253.
[32] Zheng, H., Sadek, A.Z., Breedon, M., Yao, D., Latham, K., du Plessis, J., Kalantar-Zadeh, K., Fast formation of thick and transparent titania nanotubular films from sputtered Ti. Electrochem. Commun. 11 (2009), 1308–1311.
[33] Manifacier, J., Gasiot, J., Fillard, J., A simple method for the determination of the optical constants n, h and the thickness of a weakly absorbing thin film. J. Phys. E Sci. Instrum. 9 (1976), 1002–1004.
[34] Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Sero, I., Bisquert, J., Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy. Phys. Chem. Chem. Phys. 13 (2011), 9083–9118.
[35] Bisquert, J., Influence of the boundaries in the impedance of porous film electrodes. Phys. Chem. Chem. Phys. 2 (2000), 4185–4192.
[36] Abayev, I., Zaban, A., Fabregat-Santiago, F., Bisquert, J., Electronic conductivity in nanostructured TiO2 films permeated with electrolyte. Phys. Status Solidi A 1 (2003), R4–R6.