Denies, Nicolas
[UCL]
(eng)
The research focuses on dynamic properties of vibrated dry sand within the framework of vibrodriving and vibrocompaction processes applied to granular soils.
Original experiments able to characterize the behavior of dry sand subjected to vertical vibration are first presented. In particular, the volume change and the motion pattern displayed by vertically vibrated sand particles are discussed. When cohesionless soil placed in a cylindrical container is vertically vibrated under the gravitational field (g), the UCL experiments performed on dry Fontainebleau sand allow one to distinguish three different types of dynamic behavior, depending on the acceleration amplitude (a): the densification (a/g < 1), the instability surface (a/g ≈ 1), and the vibro-fluid behaviors (a/g > 1). In the densification range, the sand simply settles. When the acceleration is increased beyond 1g, granular convection is observed and there is an instability in the sand mass leading to the emergence of an inclined free surface. If the acceleration is further increased, the free surface progressively flattens. There is an impressive dilatation of the whole sample and grains saltation is noticed. The sand becomes fully vibro-fluidized.
Results of sphere penetration experiments (SPE’s) are also presented. The sinking logs of the SPE’s conducted at UCL do not follow Stokes law, as initially suggested by the 1962 Barkan experiments. An exponentially decreasing penetration profile is observed on one hand in the densification range although no refusal depth was reached. In the vibro-fluid regime, on the other hand, the sphere quickly sinks into the vibrated medium and stabilizes at a certain equilibrium penetration. Hence, the concept of vibro-viscosity coefficient, proposed by Barkan (1962), is to be reappraised in our opinion.
In order to emphasize the evolution of the internal state of sand during vibration, one resorts to Discrete Element Modeling (DEM). Numerical simulations of vibrated granular sample are conducted under lateral periodic boundary conditions, considering only the interactions between the grains. In this way, one tries to track down the fundamental origin of the vibro-fluidization. A stratified analysis is used to describe the assembly behavior from the microscopic to the macroscopic scale. When the sample is vibrated at low acceleration amplitude (a/g = 0.5), it swiftly reaches a steady vibratory regime. There are successive compacting and dilating phases corresponding respectively to upward and downward acceleration phases of each cycle. The contact network is still preserved during the whole cycle and the granular material seems to behave like an elastic solid with regards to the macro- scale of the assembly. Once the acceleration amplitude is set to 1.02g, the contact network is cyclically disintegrated and the force chains get unbound resulting in shear strength degradation. Cyclic vibro-fluidization is therefore noticed. At the same time, the emergence of “fluid” stresses is observed, underscoring the dual nature of vibrated dry cohesionless soil.
Hence, vibrations result in a particular state of granular matter, called the “vibro-fluid” state. It is characterized by a phase transition corresponding to the transformation of a solidlike material into a complex fluid identified by an abrupt change in its properties resulting in shear strength degradation.
(fre)
La présente recherche s’intéresse à la caractérisation des propriétés dynamiques du sable sec vibré. L’intérêt pour ce domaine de l’ingénierie provient de l’étude des procédés du vibrofonçage et du vibrocompactage appliqués aux sols pulvérulents.
Dans cette perspective, des expériences, capables de caractériser le comportement du sable sec soumis à des vibrations verticales, y sont présentées. La variation de l’indice des vides et les phénomènes de recirculation des particules de
sable, ainsi que les résultats d’expériences de pénétration à la sphère (SPE’s) y sont discutés. Quand un sable sec pulvérulent, placé dans un container cylindrique, est mis en vibration verticale sous le champ gravitaire (g), les expériences conduites sur le sable de Fontainebleau, identifient trois types de comportements dynamiques distincts, dépendant de l’amplitude de l’accélération des vibrations (a) : la densification (a/g<1), l’instabilité de surface (a/g≈1) et la vibro-fluidification (a/g>1). Le régime de densification se traduit par un tassement du sable vibré.
Quand l’accélération atteint 1g, le phénomène de convection granulaire est observé : celui-ci résulte en une instabilité de la surface libre qui se met en pente sous l’effet des vibrations. Si l’accélération est encore augmentée, la surface libre est progressivement disloquée. Une forte dilatation de l’échantillon est constatée accompagnée de saltation. Le sable devient vibro-fluidifié.
Dans le cadre des expériences de pénétration à la sphère, réalisées à l’UCL, les profils d’enfoncement des SPE’s, ne suivent pas la loi de Stokes comme annoncé par Barkan (1962). Un profil exponentiel décroissant est en effet observé dans le régime de densification bien qu’aucune profondeur de refoulement ne soit atteinte. Dans le régime vibrofluide, la sphère s’enfonce rapidement dans le milieu vibré jusqu’à une hauteur d’équilibre. Il convient donc de réévaluer le concept de coefficient de vibroviscosité, proposé par Barkan (1962).
Dans le but de mettre en évidence l’évolution de l’état interne du matériau granulaire durant la vibration, des simulations par la méthode des éléments discrets (DEM) ont été réalisées. De manière à ne considérer que les interactions entre grains, le modèle est muni de frontières latérales périodiques, afin d’approcher les mécanismes fondamentaux liés à la vibro-fluidification. Une analyse par strate est utilisée pour décrire le comportement du matériau de l’échelle microscopique des grains à l’échelle macroscopique de l’assemblage. A faible amplitude d’accélération (a/g=0.5), l’échantillon atteint rapidement un régime vibratoire permanent caractérisé par une succession de phases de dilatation et de compaction correspondant aux phases d’accélération négative et positive du container. Le réseau des contacts est cependant préservé durant le cycle complet et le matériau granulaire semble se comporter comme un solide élastique, du moins à l’échelle macroscopique de l’assemblage. A 1.02g, une vibrofluidification cyclique de l’échantillon se produit. Le réseau des contacts se désintègre et les chaînes de force sont rompues entraînant ainsi la dégradation de la résistance au cisaillement. Pour ce régime de vibration en particulier, l’apparition de contraintes « fluides » est constatée : celles-ci témoignent de la dualité du matériau granulaire vibré.
L’état vibro-fluidifié peut dès lors être caractérisé par une transition de phase pour laquelle un changement dans la structure du matériau est observé : la transformation d’un matériau solide en un fluide complexe identifié par un
changement brusque de ces propriétés et par la dégradation de sa résistance au cisaillement.
Bibliographic reference |
Denies, Nicolas. Dynamic behavior of vibrated dry sand : sphere penetration experiments and discrete element modeling of vibrofluidization. Prom. : Holeyman, Alain |
Permanent URL |
http://hdl.handle.net/2078.1/68558 |