日本語
 
Help Privacy Policy ポリシー/免責事項
  詳細検索ブラウズ

アイテム詳細


公開

学術論文

Long-Term Stability of Ammonia Decomposition over Nickel-Based Catalysts

MPS-Authors
/persons/resource/persons298096

Kappis,  Konstantinos       
Inorganic Chemistry, Fritz Haber Institute, Max Planck Society;

/persons/resource/persons22181

Trunschke,  Annette       
Inorganic Chemistry, Fritz Haber Institute, Max Planck Society;

External Resource
There are no locators available
Fulltext (restricted access)
There are currently no full texts shared for your IP range.
付随資料 (公開)
There is no public supplementary material available
引用

Purcel, M., Müller, A. S., Diehl, P., Kappis, K., Trunschke, A., & Muhler, M. (2024). Long-Term Stability of Ammonia Decomposition over Nickel-Based Catalysts. Energy Technology,. doi:10.1002/ente.202400678.


引用: https://hdl.handle.net/21.11116/0000-000F-3DDC-6
要旨
Green hydrogen can be used as the backbone of a novel energy system and as a feedstock for renewable chemistry. H2 storage and transport are challenging, but ammonia as a hydrogen carrier could potentially solve these inefficiencies. Many studies focus on high catalytic activities, but the long-term stability is often insufficiently investigated. This work reports on the stability of a nickel-based reference catalyst and a coprecipitated Ni/Al2O3 catalyst over 800 h time on stream (TOS) in 98% NH3 at atmospheric pressure. An automated temperature control is necessary to adjust the temperature of the heat source to compensate for the changing heat demand resulting from catalyst activation or deactivation. Under reaction conditions the reference catalyst first undergo an activation phase before reaching its maximum conversion of 91.9% after 250 h TOS followed by a minor decrease in conversion. In comparison, the Ni/Al2O3 catalyst shows lower activity and undergo a continuous deactivation due to sintering. Overall, the activity loss at 534 °C amounted to only 1.5% for the reference catalyst and to 13.5% for the Ni/Al2O3 catalyst compared with the maximum conversion level. Thus, the Ni-based reference catalyst proves to be very stable under industrially relevant NH3 decomposition conditions.