Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag
Аутори
Nikolić, IrenaMarković, Smilja
Janković Častvan, Ivona
Radmilović, Vuk V.
Karanović, Ljiljana
Babić, Biljana M.
Radmilović, Velimir R.
Чланак у часопису (Рецензирана верзија)
Метаподаци
Приказ свих података о документуАпстракт
Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.
Кључне речи:
geopolymers / porous materials / thermal properties / steel slag / fly ashИзвор:
Materials Letters, 2016, 176, 301-305Издавач:
- Elsevier
Финансирање / пројекти:
- 0-3D наноструктуре за примену у електроници и обновљивим изворима енергије: синтеза, карактеризација и процесирање (RS-45007)
- Синтеза, развој технологија добијања и примена наноструктурних мултифункционалних материјала дефинисаних својстава (RS-45019)
- Развој, карактеризација и примена наноструктуираних композитних катализатора и интерактивних носача у горивним спреговима и електролизи воде (RS-172054)
- Serbian Academy of Sciences and Arts, Project F-141
- Ministry of Science of Montenegro, Project no. 01-460
Напомена:
- This is the peer-reviewed version of the article: Niklioć, I., Marković, S., Janković – Častvan, I., Radmilović, V.V., Karanović, L., Babić, B., Radmilović, V.R., 2016. Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. Materials Letters 176, 301–305. https://doi.org/10.1016/j.matlet.2016.04.121
DOI: 10.1016/j.matlet.2016.04.121
ISSN: 0167-577X
WoS: 000375852800075
Scopus: 2-s2.0-84964680209
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Nikolić, Irena AU - Marković, Smilja AU - Janković Častvan, Ivona AU - Radmilović, Vuk V. AU - Karanović, Ljiljana AU - Babić, Biljana M. AU - Radmilović, Velimir R. PY - 2016 UR - https://dais.sanu.ac.rs/123456789/4639 AB - Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase. PB - Elsevier T2 - Materials Letters T1 - Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag SP - 301 EP - 305 VL - 176 DO - 10.1016/j.matlet.2016.04.121 UR - https://hdl.handle.net/21.15107/rcub_dais_4639 ER -
@article{ author = "Nikolić, Irena and Marković, Smilja and Janković Častvan, Ivona and Radmilović, Vuk V. and Karanović, Ljiljana and Babić, Biljana M. and Radmilović, Velimir R.", year = "2016", abstract = "Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.", publisher = "Elsevier", journal = "Materials Letters", title = "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag", pages = "301-305", volume = "176", doi = "10.1016/j.matlet.2016.04.121", url = "https://hdl.handle.net/21.15107/rcub_dais_4639" }
Nikolić, I., Marković, S., Janković Častvan, I., Radmilović, V. V., Karanović, L., Babić, B. M.,& Radmilović, V. R.. (2016). Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters Elsevier., 176, 301-305. https://doi.org/10.1016/j.matlet.2016.04.121 https://hdl.handle.net/21.15107/rcub_dais_4639
Nikolić I, Marković S, Janković Častvan I, Radmilović VV, Karanović L, Babić BM, Radmilović VR. Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters. 2016;176:301-305. doi:10.1016/j.matlet.2016.04.121 https://hdl.handle.net/21.15107/rcub_dais_4639 .
Nikolić, Irena, Marković, Smilja, Janković Častvan, Ivona, Radmilović, Vuk V., Karanović, Ljiljana, Babić, Biljana M., Radmilović, Velimir R., "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag" in Materials Letters, 176 (2016):301-305, https://doi.org/10.1016/j.matlet.2016.04.121 ., https://hdl.handle.net/21.15107/rcub_dais_4639 .