Casa 100% sostenible
Visualitza/Obre
Projecte_casa_100%_sostenible.rar (32,57Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/342432
Tipus de documentTreball Final de Grau
Data2020-05-19
Condicions d'accésAccés restringit per decisió de l'autor
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Aquest projecte es basa en el disseny d’una casa 100% sostenible, a través de plaques
fotovoltaiques policristal·lines i de una central de geotèrmia. El projecte té tres grans blocs.
El primer bloc consta en el disseny de la casa i el càlcul de càrrega tèrmica, per tal de
aprofitar al màxim l’energia solar i després poder veure segons el nostre disseny de la casa,
quina càrrega tèrmica tindrem, tant a l’estiu com a l’hivern, i així poder dimensionar quin
tipus de bomba necessitarem per la part de la central de geotèrmia.
El segon bloc consta en fer el disseny de les plaques fotovoltaiques i veure quina energia
elèctrica hem de generar, per tal que la instal·lació sigui el més eficient i econòmica
possible. En aquesta part hem decidit fer una connexió a xarxa per tal de no tenir que
muntar bateries, ja que les bateries no son gaire eficients i a part la seva fabricació no es
molt sostenible. També agafarem i automatitzarem la casa, posant un sensor SCT013-050
per mesurar el consum de la casa, de manera que si el consum de la casa és major que la
potència que tenim contractada, mitjançant un arduino i relés començarem a desconnectar
línies de càrregues de la casa, per tal que el consum baixi i no superi la potència
contractada. Per últim, també posarem un arduino per controlar els motors de les
persianes i tendals, i depenen la època del any pujar-los o baixar-los per tal que la casa
tingui la major eficiència possible.
El tercer bloc consta en fer una petita maqueta demostrativa, per tal de simular com serà
el control i automatització del consum de la casa. Això ho farem amb un arduino que
controlarà les càrregues que tenim, que en el nostre cas seran leds, i depenen el consum
que tenim, que el mesurarem amb un sensor de corrent sct013-010 no invasiu, començarà
a apagar els leds fins que el consum sigui més baix del consum màxim que volem. El consum
que mesurarem amb el sensor serà el de un assecador de cabells de 1600W amb dues
velocitats. Posarem el límit a 900W perquè es comencin a desconnectar les càrregues, que
en el nostre cas seran 4 leds. Com amb la primera velocitat del assecador de cabells dona
aproximadament la meitat de la potència (800W), per això posarem de límit 900W per
assegurar que amb la primera velocitat no passem aquesta potència límit. També
mesurarem la potència generada de una placa solar mini, que podem connectar al arduino,
per tal de veure quina potència genera en cada moment depenen les condicions de
radiació. Per acabar muntarem una pantalla LCD on mostrarem els resultats obtinguts de
la mesura del sensor de corrent SCT013 i els resultats que mesurem del panell solar. photovoltaic panels and geothermal power plant. The project have three main areas.
The first area consists of the design of the house and the calculation of thermal loads, in
order to make the most of the solar energy. Then according to our design of the house,
what thermal tightness we will have both in winter and summer. In this way, we be able to
measure what type of pump we will need for the part of the geothermal power plant.
The second area consists of the design of the photovoltaic panels and how much electric
energy we will generate, so that the installation be as efficient and economical as possible.
In this part, he decided to make a connection to electrical net, so we don’t have to put
batteries. The batteries are not efficient and the manufacturing is not sustainable. Also we
will take and automate the house, putting a sensor SCT013-050 to measure the
consumption of the house and if the consumption of the house is higher than the power
we have contracted, we will use an arduino and relays we to disconnect load lines of the
house. In this way the consumption will go down and doesn’t exceed the contracted power.
Finally, we will put an arduino to control the motors of the blinds and awnings, and it
depends on the time of year to raise or lower them so that the house has the highest
possible efficiency.
The third block consists of making a small demonstration model, in order to simulate the
control and automation the house consumption will be like. We will do this with an arduino
that will control the loads we have, which in our case are leds. Depend on the consumption
we have the arduino will start turning off the leds until the consumption is lower than the
maximum consumption we want. We will measure the consumption with a current sensor
sct013-010, that is a non-invasive sensor. The consumption it will measure with the sensor
will be a hair dryer with two speeds that have 1600W. We set the limit to 900W because
the loads begin to disconnects. In our case are 4 LEDs. How the first speed of the hair dryer
is obtained medium power approximately (800W), we will put the limit of 900W to make
sure that the first speed it does not have pass this limit. Also, we will measure the power
generated by a mini solar panel, which we can connect to the Arduino, in order to see what
power it generates depending on the radiation conditions. Finally we will mount a LCD
screen where we will show the results obtained from the measurement of the current
sensor SCT013 and the results that we measure from the solar panel.
MatèriesEcological houses, Dwellings -- Energy consumption, Geothermal resources, Photovoltaic power systems -- Design, Cases ecològiques, Habitatges -- Consum d'energia, Instal·lacions fotovoltaiques -- Disseny, Energia geotèrmica
TitulacióGRAU EN ENGINYERIA ELECTRÒNICA INDUSTRIAL I AUTOMÀTICA (Pla 2016)
Localització
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Projecte_casa_100%_sostenible.rar | 32,57Mb | application/x-rar-compressed | Accés restringit |