Mg/C composites; squeeze casting; wetting; interfacial reactions; LiMaRC - Liège Materials Research Center
Abstract :
[en] Mg-C composites offer a suitable alternative to Al alloys while allowing for a significant weight reduction, but their production can be impaired by the poor wettability of C substrates by Mg. In the present work, a new 'liquid' processing route has been investigated. By making use of the well-known effect of a pre-treatment of the C fibres with an aqueous solution of K2ZrF6 in favouring spontaneous wetting of C with Al, C yarns have been pre-impregnated with Al and the feasibility of further using them as reinforcements in Mg matrix composites has been assessed. More particularly, it has thus been shown that, under the thermal conditions involved in the process, C fibres did not suffer damage due to chemical reaction with Al, and also that special care should be taken in order to control the surface condition of the pre-infiltrated yarns.
Disciplines :
Materials science & engineering
Author, co-author :
Mertens, Anne ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Science des matériaux métalliques
Montrieux, Henri-Michel ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Science des matériaux métalliques
Halleux, Jacques
Lecomte-Beckers, Jacqueline ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Science des matériaux métalliques
Delannay, Francis
Language :
English
Title :
Processing of Carbon Fibers Reinforced Mg Matrix Composites Via Pre-infiltration with Al
P. Asadi, G. Faraji, and M.K. Besharati, Producing of AZ91/SiC Composite by Friction Stir Processing (FSP), Int. J. Adv. Manuf. Technol., 2010, 51, p 247-260
M.S. Yong and A.J. Clegg, Process Optimisation for a Squeeze Cast Magnesium Alloy Metal Matrix Composite, J. Mater. Process. Technol., 2005, 168, p 262-269 (Pubitemid 41203305)
H.Z. Ye and X.Y. Liu, Review of Recent Studies in Magnesium Matrix Composites, J. Mater. Sci., 2004, 39, p 6153-6171
F. Delannay, L. Froyen, and A. Deruyttere, Review-The Wetting of Solids by Molten Metals and Its Relation to the Preparation of Metal-Matrix Composites, J. Mater. Sci., 1987, 22, p 1-16 (Pubitemid 17552957)
F. Boland, C. Colin, and F. Delannay, Control of Interfacial Reactions During Liquid Phase Processing of Aluminum Matrix Composites Reinforced with INCONEL 601 Fibers, Metall. Mater. Trans., 1998, 29A, p 1727-1739 (Pubitemid 128716898)
J.C. Viala, P. Fortier, G. Claveyrolas, H. Vincent, and J. Bouix, Effect of Magnesium on the Composition, Microstructure and Mechanical Properties of Carbon Fibres, J. Mater. Sci., 1991, 26, p 4977-4984
F. Wu, J. Zhu, K. Ibe, and T. Oikawa, Analysis of the Interface in Graphite/Magnesium Composites at the Nanometer Scale, Compos. Sci. Technol., 1998, 58, p 77-82
J.C. Viala, G. Claveyrolas, F. Bosselet, and J. Bouix, The Chemical Behaviour of Carbon Fibres in Magnesium Base Mg-Al Alloys, J. Mater. Sci., 2000, 35, p 1813-1825 (Pubitemid 30589873)
A. Kleine, J. Hemptenmacher, H.J. Dudek, K.U. Kainer, and G. Krüger, Interface Formation in Carbon Fibre Reinforced Magnesium Alloys (AZ91), J. Mater. Sci. Lett., 1995, 14, p 358-360
A. Feldhoff, E. Pippel, and J. Woltersdorf, TiN Coatings in C/Mg-Al Composites: Microstructure, Nanochemistry and Function, Philos. Mag. A, 2000, 80(3), p 659-672 (Pubitemid 35393521)
F. Reischer, E. Pippel, J. Woltersdorf, S. Stöckel, and G. Marx, Carbon Fibre-Reinforced Magnesium: Improvement of Bending Strength by Nanodesign of Boron Nitride Interlayers, Mater. Chem. Phys., 2007, 104, p 83-87 (Pubitemid 46855969)
J.P. Rocher, J.M. Quenisset, and R. Naslain, Wetting Improvement of Carbon or Silicon Carbide by Aluminium Alloys Based on a K 2ZrF 6 Surface Treatment: Application to Composite Material Casting, J. Mater. Sci., 1989, 24, p 2697-2703
S. Schamm, R. Fedou, J.P. Rocher, J.M. Quenisset, and R. Naslain, The K2ZrF6 Wetting Process: Effect of Surface Chemistry on the Ability of a SiC-Fiber Preform to be Impregnated by Aluminum, Metall. Trans., 1991, 22A, p 2133-2139 (Pubitemid 23574945)
C. Margueritat-Regenet, Elaboration et Caractérisation de Fils Composites C/Al-Infiltration Spontanée et Continue par Activation Chimique du Mouillage, PhD Thesis, Ecole Nationale Supérieure des Mines de Paris, Paris, 2002
C. Salmon, Elaboration et Caractérisation de Composites Pb/Carbone et Pb/Verre en vue de leur Utilisation Comme Anode d'électrolyse, Master Thesis, Université catholique de Louvain, Louvain-la-Neuve, 1995
L. Cizek, M. Greger, L. Pawlica, L.A. Dobrzanski, and T. Tanski, Study of Selected Properties of Magnesium Alloy AZ91 After Heat Treatment and Forming, J. Mater. Process. Technol., 2004, 157-158, p 466-471
I.H. Khan, The Effect of Thermal Exposure on the Mechanical Properties of Aluminum-Graphite Composites, Metall. Trans., 1976, 7A, p 1281-1289
S. Ochiai and Y. Murakami, Tensile Strength of Composites with Brittle Reaction Zones at Interfaces, J. Mater. Sci., 1979, 14, p 831-840 (Pubitemid 9440995)
M. Russell-Stevens, R. Todd, and M. Papakyriacou, The Effect of Thermal Cycling on the Properties of a Carbon Fibre Reinforced Magnesium Composite, Mater. Sci. Eng. A, 2005, 397, p 249-256 (Pubitemid 40564161)
W.M. Zhong, G. L'Espérance, and M. Suéry, Interfacial Reactions in Al-Mg (5083)/Al 2O 3p Composites During Fabrication and Remelting, Metall. Mater. Trans., 1995, 26A, p 2625-2635