Li, B.; Wang, F.; Chi, Y.; Yan, J. Adhesion and Cohesion Characteristics of Sewage Sludge during Drying. Drying Technol. 2014, 32, 1598–1607. DOI: 10.1080/07373937.2014.910522.
Fraikin, L.; Herbreteau, B.; Salmon, T.; Nicol, F.; Crine, M.; Léonard, A. Use of an Experimental Design to Characterize the Convective Drying Behavior of Different Sludges. Drying Technol. 2015, 33, 1302–1308. DOI: 10.1080/07373937.2015.1026979.
Salgado, M. A. H.; Neto da Silva, F. J. Modeling of Paper Mill Sewage Sludge Drying Using Artificial Neural Networks: Reduction of the Training Database through Taguchi’s Method. Drying Technol. 2017, 35, 534–544. DOI: 10.1080/07373937.2016.1187162.
Dai, Z.; Su, M.; Ma, X.; Wang, G.; Li, D.; Liu, C.; Weng, H. Direct Thermal Drying of Sludge Using Flue Gas and its Environmental Benefits. Drying Technol. 2018, 36, 1006–1016. DOI: 10.1080/07373937.2017.1368541.
San José, M.; Alvarez, S.; López, R. Drying of Industrial Sludge Waste in a Conical Spouted Bed Dryer. Effect of Air Temperature and Air Velocity. Drying Technol. 2019, 37, 118–128. DOI: 10.1080/07373937.2018.1441155.
Deng, W.; Xiao, J.; Lai, Z.; Su, Y. A New Method to Characterize Sludge Stickiness during Drying: Effects of Sludge Temperature and Calcium Oxide (CaO) on Stickiness. Drying Technol. 2020, 38, 1107–1114. DOI: 10.1080/07373937.2019.1615938.
Léonard, A.; Blacher, S.; Marchot, P.; Pirard, J.-P.; Crine, M. Measurement of Shrinkage and Cracks Associated to Convective Drying of Soft Materials by X-Ray Microtomography. Drying Technol. 2004, 22, 1695–1708. DOI: 10.1081/DRT-200025629.
Ayol, A.; Muslu, D. Response Surface Methodological Approach for the Assessment of Thermal Drying of Dewatered Municipal Sludge. Drying Technol. 2012, 30, 1621–1629. DOI: 10.1080/07373937.2012.701260.
Bennamoun, L.; Fraikin, L.; Léonard, A. Modeling and Simulation of Heat and Mass Transfer during Convective Drying of Wastewater Sludge with Introduction of Shrinkage Phenomena. Drying Technol. 2014, 32, 13–22. DOI: 10.1080/07373937.2013.807281.
Bennamoun, L.; Crine, M.; Léonard, A. Convective Drying of Wastewater Sludge: Introduction of Shrinkage Effect in Mathematical Modeling. Drying Technol. 2013, 31, 643–654. DOI: 10.1080/07373937.2012.752743.
Scalcon, A.; Sone, A.; Johann, G.; Gimenes, M.; Vieira, M. Shrinkage of Digested Sludge from Gelatin Production. Drying Technol. 2018, 36, 1603–1618. DOI: 10.1080/07373937.2017.1419479.
Werle, S.; Wilk, R. K. A Review of Methods for the Thermal Utilization of Sewage Sludge: The Polish Perspective. Renewable Energy 2010, 35, 1914–1919. DOI: 10.1016/j.renene.2010.01.019.
Léonard, A.; Meneses, E.; Le Trong, E.; Salmon, T.; Marchot, P.; Toye, D.; Crine, M. Influence of Back Mixing on the Convective Drying of Residual Sludges in a Fixed Bed. Water Res. 2008, 42, 2671–2677. DOI: 10.1016/j.watres.2008.01.020.
Tao, T.; Peng, X.; Lee, D. Thermal Drying of Wastewater Sludge: Change in Drying Area Owing to Volume Shrinkage and Crack Development. Drying Technol. 2005, 23, 669–682. DOI: 10.1081/DRT-200054164.
Li, J.; Bennamoun, L.; Fraikin, L.; Salmon, T.; Toye, D.; Schreinemachers, R.; Léonard, A. Analysis of the Shrinkage Effect on Mass Transfer during Convective Drying of Sawdust/Sludge Mixtures. Drying Technol. 2014, 32, 1706–1717. DOI: 10.1080/07373937.2014.924136.
Li, J.; Fraikin, L.; Salmon, T.; Bennamoun, L.; Toye, D.; Schreinemachers, R.; Léonard, A. Investigation on Convective Drying of Mixtures of Sewage Sludge and Sawdust in a Fixed Bed. Drying Technol. 2015, 33, 704–712. DOI: 10.1080/07373937.2014.982254.
Li, J.; Fraikin, L.; Salmon, T.; Plougonven, E.; Toye, D.; Léonard, A. Convective Drying Behavior of Sawdust-Sludge Mixtures in a Fixed Bed. Drying Technol. 2016, 34, 395–402. DOI: 10.1080/07373937.2015.1076835.
Li, J.; Plougonven, E.; Fraikin, L.; Salmon, T.; Toye, D.; Nistajakis, E.; Léonard, A. Influence of Sawdust Addition on Drying of Wastewater Sludges: Comparison of Structural Characteristics. Drying Technol. 2017, 35, 925–932. DOI: 10.1080/07373937.2016.1253020.
Li, J.; Wu, C.-W.; Fraikin, L.; Salmon, T.; Toye, D.; Nistajakis, E.; Léonard, A. Convective Drying of Sawdust-Sludge Mixtures: The Effect of the Sludge Matrix. Drying Technol. 2019, 37, 920–927. DOI: 10.1080/07373937.2018.1480027.
Toye, D.; Crine, M.; Marchot, P. Imaging of Liquid Distribution in Reactive Distillation Packings with a New High-Energy X-Ray Tomograph. Meas. Sci. Technol. 2005, 16, 2213–2220. DOI: 10.1088/0957-0233/16/11/012.
Otsu, N. A Threshold Selection Method from Gray-Level Histograms. Automatica 1975, 11, 23–27.
Aferka, S.; Marchot, P.; Crine, M.; Toye, D. Interfacial Area Measurement in a Catalytic Distillation Packing Using High Energy X-Ray CT. Chem. Eng. Sci. 2010, 65, 511–516. DOI: 10.1016/j.ces.2009.05.048.
Li, J.; Plougonven, E.; Fraikin, L.; Salmon, T.; Toye, D.; Léonard, A. Image Analysis of X-Ray Tomograms of Sludge during Convective Drying in a Pilot-Scale Fixed Bed. Chem. Eng. Sci. 2015, 134, 222–229. DOI: 10.1016/j.ces.2015.05.010.
Huron, Y.; Salmon, T.; Crine, M.; Blandin, G.; Léonard, A. Effect of Liming on the Convective Drying of Urban Residual Sludges. Asia-Pac. J. Chem. Eng. 2010, 5, 909–914. DOI: 10.1002/apj.421.
Léonard, A.; Blacher, S.; Marchot, P.; Crine, M. Use of X-Ray Microtomography to Follow the Convective Heat Drying of Wastewater Sludges. Drying Technol. 2002, 20, 1053–1069. DOI: 10.1081/DRT-120004013.
