Microstructure investigations of Co-Si-B alloy after milling and annealing
Authors:
- Grzegorz Stefan Dercz,
- Lucjan Pająk,
- R Nowosielski,
- R Babilas,
- G[rzegorz] Dercz,
- L[ucjan] Pająk
Abstract
Purpose: The work presents the microstructure characterization of Co77Si11,5B11,5 metallic glass after high-energy ball milling and heat treatment processes. Design/methodology/approach: The studies were performed on ribbon prepared by melt spinning and this ground in high-energy vibratory ball mill. The tested ribbon and obtained powders were also annealed in specified heat treatment conditions. The morphology of the powder particles of milled ribbon was analyzed by using the confocal laser scanning microscope. The methods of X-ray diffraction were used for the qualitative phase analysis. The parameters of the individual diffraction line profiles were determined by PRO-FIT Toraya procedure. The average crystallite sizes and lattice distortions for Co phase were estimated using Williamson-Hall method. Findings: The studied Co77Si11.5B11.5 metallic glass in annealed state contains hexagonal Co crystalline phases emerged in amorphous matrix. The crystallite size of Co phase in as-cast sample lies in nanoscale. After annealing process the crystallite size increases to 72 nm and diminishes to 46 nm in the powder sample after 30 hours of milling. The milling causes decrease of the crystallite size and increase of lattice distortions of crystalline phase. The powder particles after 30 hours of milling are of spherical shape. Practical implications: The powder particles obtained after milling process of Co-based metallic glass could be suitable components in production of ferromagnetic nanocomposites. Originality/value: The obtained results confirm the utility of applied investigation methods in the microstructure analysis of powder materials with nanocrystalline phases. Keywords: X-ray phase analysis; Toraya procedure; High-
- Record ID
- USLb740ca48208648899b5856f57ad961bf
- Author
- Journal series
- Journal of Achievements of Materials and Manufacturing Engineering, ISSN 1734-8412, e-ISSN 2300-892X
- Issue year
- 2007
- Vol
- 23
- No
- 1
- Pages
- 59-62
- Keywords in English
- X-ray phase analysis, Toraya procedure
- Handle.net URL
- hdl.handle.net/20.500.12128/14171 Opening in a new tab
- Language
- pol (pl) Polish
- File
-
- File: 1
- Microstructure investigations of Co-Si-B alloy after milling and annealing, File Nowosielski_Microstructure_investigations_of_Co_Si_B_alloy.pdf / 1 MB
- Nowosielski_Microstructure_investigations_of_Co_Si_B_alloy.pdf
- publication date: 06-02-2024
- Microstructure investigations of Co-Si-B alloy after milling and annealing, File Nowosielski_Microstructure_investigations_of_Co_Si_B_alloy.pdf / 1 MB
-
- Score (nominal)
- 0
- Score source
- journalList
- Uniform Resource Identifier
- https://opus.us.edu.pl/info/article/USLb740ca48208648899b5856f57ad961bf/
- URN
urn:uni-kat-prod:USLb740ca48208648899b5856f57ad961bf
* presented citation count is obtained through Internet information analysis, and it is close to the number calculated by the Publish or PerishOpening in a new tab system.