Improvement in the impact toughness of aluminium fiber glass composites

Download
029236.pdf
1993
Duru, Mesut
Show full item record
71
views
0
downloads
https://hdl.handle.net/11511/10644
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

IMPROVEMENT IN THE IMPACT TOUGHNESS OF ALUMINUM FIBREGLASS COMPOSITES
SELCUK, E (1994-08-25)
Improvement in sinterability and phase stability of hydroxyapatite and partially stabilized zirconia composites
Evis, Zafer; KUTBAY, IŞIL (Elsevier BV, 2009-03-01)
Composites of hydroxyapatite with partially stabilized zirconia with MgO or MgF2 were pressureless sintered between 1000 degrees C and 1300 degrees C. The reactions and transformations of phases were verified by X-ray diffraction. For the hydroxyapatite and zirconia composites with MgO, calcium from the hydroxyapatite diffused into the zirconia phase, and the hydroxyapatite decomposed to tri-calcium phosphate at sintering temperatures higher than 1000 degrees C. Above about 1200 degrees C, CaZrO3 was formed...
Improvement of temporal resolution of fMRI data for brain decoding
Varol, Emel; Yarman Vural, Fatoş Tunay; Department of Computer Engineering (2022-2-10)
In this study, we aim to increase the accuracy of the mapping between the states of the brain and problem-solving phases namely planning and execution. To create a computational model to generate the mapping, an fMRI dataset obtained from subjects solving the Tower of London problem has been used. fMRI data is suitable for this problem as it provides regional and time-varying changes in brain metabolism. However, developing the model using fMRI data is not trivial. Generally, fMRI data has a very large feat...
Improvement of silicon heterojunction solar cell performance with new surface structure and wide band gap carrier selective layers
Dönerçark, Ergi; Turan, Raşit; Yerci, Selçuk; Department of Micro and Nanotechnology (2021-10-15)
The photovoltaic (PV) industry is dominated by silicon-based solar cells owing to the abundance of silicon and its full-fledged technology. The main road for the PV industry points out to enhance the conversion efficiency of solar cells while decreasing production costs, which is crucial for improving renewable energy market share. The silicon heterojunction solar cells (SHJ) are receiving attention on this road map due to their higher conversion efficiencies, simple process flow, and low-temperature fabric...
Improvement of impact resistance of aluminum and zinc based die cast parts by means of tool steel inserts
Kamberoğlu, Murat; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2011)
High Pressure Die Casting (HPDC) is low-cost technique for the mass production of complex, non-ferrous parts. Despite its benefits such as dimensional accuracy, surface quality and high production rate; some mechanical drawbacks limit use of HPDC in production of critical parts especially under dynamical loads. This study aims to improve impact resistance and surface hardness of die cast parts by means of tool steel inserts. These inserts act as a barrier between the impactor and die casting alloy, in order...
Citation Formats
M. Duru, “Improvement in the impact toughness of aluminium fiber glass composites,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr