Thermit welding mould making

Download

047244.pdf

Date

1995

Author

Hoşgör, Hasan

Metadata

Show full item record

Item Usage Stats

44
views

0
downloads

URI

https://hdl.handle.net/11511/10671

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Thermomechanical characterization of Ti-Rich TiNi shape memory alloys H Yaşar, Fatih; Bor, Şakir; Department of Metallurgical and Materials Engineering (2006) Titanium-nickel is a unique class of material known as Shape Memory Alloy (SMA). A thermoelastic martensitic phase transformation is responsible for its extraordinary properties such as shape memory effect and superelasticity. The near equiatomic Ti-Ni alloys are the commercially most exploited SMAs because of the unique combination of these properties and superior ductility, strength, fatigue resistance and corrosion resistance. The properties of Ti-Ni SMAs are very sensitive to composition and the process...
Thermoeconomic optimisation of a single stage heat pump system Koçoğlu, Ahmet; Yüncü, Hafit; Department of Mechanical Engineering (1993)
Thermomechanical modeling of NiTi shape memory alloys including plasticity Küçüker, Hamdi Alpay; Darendeliler, Haluk; Anlaş, Günay; Department of Mechanical Engineering (2022-8) Shape memory alloys (SMA) are unique materials with an ability to recover their original shape from large deformations when unloaded and/or subjected to heat. Their ability to recover from large strains, due to martensitic transformation, even under excessive loading allows them to be used in various different sectors including aerospace, biomedical and automotive. The present thesis summarizes the studies on constitutive modelling of SMAs and the effect of plasticity on it. Based on the experiments and tes...
Thermoeconomic optimisation of simple refrigerators Dingeç, Haldun; İleri, Arif; Department of Mechanical Engineering (1996)
Thermo-optic tuning of erbium-doped amorphous silicon nitride microdisk resonators Hryciw, Aaron C.; Kekatpure, Rohan D.; Yerci, Selçuk; Dal Negro, Luca; Brongersma, Mark L. (2011-01-24) We demonstrate a technique to yield a direct and sensitive measurement of the thermo-optic coefficient (TOC) for light-emitting materials in optical microdisk resonators. Using photoluminescence from erbium-doped amorphous silicon nitride (a-SiN(x):Er) as an example, we show how the TOC can be extracted from thermally induced shifts in the resonant microdisk modes. For the highest-performance a-SiN(x):Er material composition, we find a TOC at 1.54 mu m of similar to 3 X 10(-5) K(-1) in the 300-500 K range. ...

Citation Formats

H. Hoşgör, “Thermit welding mould making,” Middle East Technical University, 1995.