The feasibility, reliable communication and networking aspects of passive wireless sensor networks

Download
2006
Yağlı, Mehmet
The primary challenge in wireless sensor network (WSN) deployment is the limited network lifetime due to the finite-capacity batteries. In accordance with this challenge, the vast majority of research efforts thus far have focused on the development of energy-efficient communication and computing mechanisms for WSNs. In this thesis, a fundamentally different approach and hence completely new WSN paradigm, i.e., the Passive Wireless Sensor Network (PWSN), is introduced. The objective of PWSN is to eliminate the limitation on the system lifetime of the WSNs. In PWSN, power is externally supplied to the sensor network node via an external RF source. Hence, the lifetime of the system is no longer determined by the lifetime of the batteries. An alternative communication scheme, modulated backscattering, is also discussed to be utilized in PWSN. The feasibility of the proposed system is investigated along with the open research challenges for reliable communication and networking in PWSN. Additionally, a new medium access schemee for PWSN, Ultra-Wideband PWSN Medium Access Control (UWB PWSN MAC), is presented.

Suggestions

Reliable real-time video communication in wireless sensor networks
Ayran, Orhan; Akan, Özgür Barış; Department of Electrical and Electronics Engineering (2007)
Many wireless sensor network (WSN) applications require efficient multimedia communication capabilities. However, the existing communication protocols in the literature mainly aim to achieve energy efficiency and reliability objectives and do not address the multimedia communication challenges in WSN. In this thesis, comprehensive performance evaluation of the existing transport protocols is performed and it has been shown that the existing proposals achieve very poor performance in terms of large set of me...
Scheduling algorithms for wireless cdma networks
Hakyemez, Serkan Ender; Schmidt, Şenan Ece; Department of Electrical and Electronics Engineering (2007)
In recent years the need for multimedia packet data services in wireless networks has grown rapidly. To overcome that need third generation (3G) mobile services have been proposed. The fast growing demands multimedia services in 3G services brought the need for higher capacity. As a result of this, the improvement on throughput, traffic serving performance has become necessary in 3G systems. Code division multiple access (CDMA) technique is one of the most important 3G wireless mobile techniques that has be...
X-band high power ferrite phase shifters
Altan, Hakkı İlhan; Aydın Çivi, Hatice Özlem; Demir, Şimşek; Department of Electrical and Electronics Engineering (2010)
Ferrite phase shifters are key components of passive phased array antenna systems. In a modern radar system, microwave components in the transmit path should handle high microwave power levels. Also low loss operation in phase shifters is critical, since radar range depends on the microwave power transmitted from the antennas. In this respect, ferrite phase shifters provide required performance characteristics for phased array radar systems. In this thesis, Reggia-Spencer type and twin-toroid type ferrite p...
A new approach for the assessment of hf channel availability under ionospheric disturbances
Sarı, Murat Özgür; Tulunay, Ersin; Department of Electrical and Electronics Engineering (2006)
High Frequency (3-30 MHz) (HF) Ionospheric Channel is used for military, civilian and amateur communications. By using Ionosphere, communication for distances beyond the line of sight is achieved. The main advantage of this type of communication is that it does not to require a satellite to communicate with a point beyond the line of sight. Actually the Ionosphere is used instead of a satellite. To use Ionosphere but not a satellite means independent communication for a country. The disadvantage of HF Ionos...
Electronically tunable microwave bandstop filter design and implementation
Oruç, Sacid; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2010)
In modern broadband microwave applications, receivers are very sensitive to interference signals which can come from the system itself or from hostile emitters. Electronically tunable bandstop filters can be used to eliminate these interference signals with adaptation to changing frequency conditions. In this thesis, electronically tunable bandstop filter design techniques are investigated for microwave frequencies. The aim is to find filter topologies which allow narrowband bandstop or ‘notch’ filter desig...
Citation Formats
M. Yağlı, “The feasibility, reliable communication and networking aspects of passive wireless sensor networks,” M.S. - Master of Science, Middle East Technical University, 2006.