Synthesis and electrochromic properties of conducting polymers of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1H-pyrrole and their use in eletctrochromic devices

Download
2006
Varış, Serhat
A new monomer; 1-(4-Nitrophenyl)-2,5-di-2-thienyl-1H-pyrrole SNSNO2 was synthesized through the Knorr-Paal condensation reaction of 1,4-di-2-thienyl-1,4-butanedione and p-nitroaniline. The chemical structure of monomer and polymer were characterized via Nuclear Magnetic Resonance Spectroscopy (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Chemical polymerization produced a polymer which was completely soluble in organic solvents. Electrochemical behaviors of SNSNO2 and SNSNO2 in the presence of EDOT were studied by cyclic voltammetry (CV). The synthesis of homopolymer and copolymer were achieved via constant potential electrolysis. Both homopolymer P(SNSNO2) and copolymer P(SNSNO2-co-EDOT) were characterized by various techniques including cyclic voltammetry, FTIR, Scanning Electron Microscopy (SEM) and UV-VIS Spectrophotometer. Conductivities of samples were measured by four probe technique. The electrochromic properties of the polymers were investigated via spectroelectrochemistry, colorimetry and switching studies. In addition, dual type electrochromic devices (ECDs) composed of P(SNSNO2), P(SNSNO2-co-EDOT) and poly(3,4-ethylenedioxythiophene) (PEDOT) were constructed and evaluated. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic Voltammetry. They have shown to possess good switching times, reasonable contrasts and high stabilities.

Suggestions

Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties
Ak, Metin; Durmus, Asuman; Toppare, Levent Kamil (Springer Science and Business Media LLC, 2007-06-01)
A new monomer; N-(2-(thiophen-3-yl)methylcarbonyloxyethyl) maleimide (NMT) was synthesized. The chemical structure of the monomer was characterized by Nuclear Magnetic Resonance (H-1-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. Electrochemical polymerization of NMT was performed in acetonitrile (AN)/borontrifloride ethylether (BFEE) solvent mixture (1:1, v/v) where tetrabutylammonium tetrafluoroborate (TBAFB) was utilized as the supporting electrolyte. The resulting conducting polymer was charac...
Synthesis and electrochromic properties of conducting polymers of succinic acid bis-(2-thiophen-3-yl-ethyl) ester and their use in electrochromic devices
Saçan, Lale; Toppare, Levent Kamil; Department of Chemistry (2006)
A new monomer; succinic acid bis-(2-thiophen-3-yl-ethyl)ester (SATE) was synthesized through the esterification reaction of 2-thiophen-3-yl-ethanol and succinyl chloride. The chemical structure of monomer was characterized via Nuclear Magnetic Resonance Spectroscopy (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Electrochemical behaviors of SATE alone and SATE in the presence of thiophene were studied by cyclic voltammetry (CV). The synthesis of homopolymer and copolymer were achieved via constan...
Synthesis and electropolymerization of 1,2-bis(thiophen-3-ylmethoxy)benzene and its electrochromic properties and electrochromic device application
AK, METİN; Ak, Mine Sulak; Kurtay, Guelbin; GÜLLÜ, Mustafa; Toppare, Levent Kamil (Elsevier BV, 2010-07-01)
A new thiophene-based monomer; 1,2-bis(thiophen-3-ylmethoxy)benzene (BTMB) has been synthesized and chemical structure of the monomer was characterized. Polymerization of BTMB and characterization of the resulting polymer P(BTMB) were performed. Spectroelectrochemical analysis of the P (BTMB) reflected electronic transitions at 400 nm, 520 nm and similar to 720 nm, corresponding to pi-pi* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via me...
Synthesis and characterization of epoxy-acrylate vinylester resin and network structure
Zeytin Derin, Çiğdem; Usanmaz, Ali; Department of Polymer Science and Technology (2008)
Vinylesters are termosets resins that have reactive double bond at the chain ends. They are produced by the reaction of various epoxies and acrylic acids by step growth polymerization. Vinylester chains are oligomers with molecular weight from 600 to 1200 g/mol. The resin viscosity is very high; therefore, diluent is used for easy application. The generally used diluent is styrene with, reactive double bonds to form a crosslink between the chains. The diluted resin viscosities are between 200 2000 cps. Per...
Synthesis of a dipyrromethane functionalized monomer and optoelectrochromic properties of its polymer
Ak, Metin; Gancheva, Valeria; Terlemezyan, Levon; Tanyeli, Ghangir; Toppare, Levent Kamil (2008-08-01)
A dipyrromethane functionalized monomer; 5-(4-tert-butylphenyl)dipyrromethane (BPDP) was synthesized. The structure of the monomer was characterized by nuclear magnetic resonance (H-1 NMR and C-13 NMR) and Fourier transform infrared (FTIR) spectroscopies. Electrochemical polymerization of BPDP was performed in acetonitrile (AN)/LiClO4. The resulting conducting polymer was characterized by FTIR spectroscopy and electrical conductivity measurements. Spectroelectrochemical behavior and switching ability of P(B...
Citation Formats
S. Varış, “Synthesis and electrochromic properties of conducting polymers of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1H-pyrrole and their use in eletctrochromic devices,” M.S. - Master of Science, Middle East Technical University, 2006.