Design of tunable impedance matching circuit for a GSM antenna

Download
index.pdf
2015
Öztürk, Mehmet Ali
Show full item record
327
views
217
downloads
In this thesis, automatic impedance matching circuits are designed by using several tuning approaches. A typical automatic impedance matching system compensates for the impedance variations of the antenna due to the human hand and head using an electronically tunable impedance matching circuitry. Maximum output power, the linearity and efficiency of PA can be improved using automatic impedance matching circuit units. There are various tunable impedance matching circuits proposed in the literature to enhance RF front end operating conditions. These circuits are implemented by using inductors and varactors in various circuit topologies which can be utilized at the input of the low noise amplifier (LNA) in the receive chain and the output of the power amplifier (PA) in the transmit chain. Impedance coverage regions are investigated by sweeping all tunable components for various tuners. Our proposed automatic impedance networks are designed by utilizing a variation of available networks in the literature plus some novelties on the configuration and improvements on control voltage levels. A prototype of impedance tuner consisting of a 90 degree phase shifter and a variable transformer connected in cascade is implemented on an FR4 board. The automatic impedance tuning unit composed of directional couplers, attenuators, AD8302 is fabricated on an FR4 board to test the performance of the impedance tuner for various load impedances in the frequency bandwidth of 880-920 MHz. The automatic impedance tuner measurements show that significant VSWR improvement can be achieved for different load impedances. These measurements also show that the VSWR value is maintained below two for most of the mismatched loads in the frequency band of 880-920MHz. In order to study the overall efficiency of the tunable matching circuit, relative transducer gain expression is also employed to measure how much improvement or loss is introduced by the tunable matching circuit. The developed impedance tuner is compact and needs control voltage levels up to 3.3V, so that it is a good candidate for cell phone applications.
Tuning., Varactors., Antennas (Electronics)., Global system for mobile communications.
http://etd.lib.metu.edu.tr/upload/12619001/index.pdf
https://hdl.handle.net/11511/24907
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Electrical impedance tomography using induced and injected currents
Gençer, Nevzat Güneri; Kuzuoğlu, Mustafa (IOP Publishing, 1992-01-01)
A two-dimensional forward problem formulation is introduced for electrical impedance tomography (EIT) using induced currents. The forward problem is linearised around a certain resistivity distribution and the inverse problem is formulated as a solution of a linear system of equations. Sensitivity of boundary measurements to resistivity variations arc analysed for spatially uniform, linear and quadratic fields. The formulation, however, is suitable for studying the effects of a general magnetic field applie...
Design of an electromagnetic classifier for spherical targets
Ayar, Mehmet; Sayan, Gönül; Department of Electrical and Electronics Engineering (2005)
This thesis applies an electromagnetic feature extraction technique to design electromagnetic target classifiers for conductors, dielectrics and dielectric coated conductors using their natural resonance related late-time scattered responses. Classifier databases contain scattered data at only a few aspects for each candidate target. The targets are dielectric spheres of varying sizes and refractive indices, perfectly conducting spheres varying sizes and dielectric coated conducting spheres of varying refra...
Design and implementation of microwave lumped components and system integration using MEMS technology
Temoçin, Engin Ufuk; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents the design and fabrication of coplanar waveguide to microstrip transitions and planar spiral inductors, and the design of metal-insulator-metal capacitors, a planar band-pass, and a low-pass filter structures as an application for the inductors and capacitors using the RF MEMS technology. This thesis also includes a packaging method for RF MEMS devices with the use of “benzocyclobutene” as bonding material. The transition structures are formed by four different methods between coplanar ...
Design, Implementation and Operation of a New C-type 2nd Harmonic Filter for Electric Arc and Ladle Furnaces
Gercek, Cem Ozgur; Ermiş, Muammer; Ertas, Arif; Kose, Kemal Nadir; Unsar, Ozgur (2010-10-07)
In this research work, the transient overvoltage suppression capability and harmonic filtering performance of C-type 2nd harmonic filters are optimized by using two-stage damping resistors; one is permanently connected to the filter circuit, while the other one is switched on by back-to-back connected thyristors during furnace transformer and Harmonic Filter (HF) energization periods. However in conventional C-type 2nd HFs there is only one damping resistor, which is permanently connected to the filter circ...
ANALYSIS OF 3-DIMENSIONAL SOFTWARE EIT PHANTOMS BY THE FINITE-ELEMENT METHOD
Kuzuoğlu, Mustafa; IDER, YZ (IOP Publishing, 1992-01-01)
In electrical impedance tomography, two-dimensional (2D) finite element solutions are used in the imaging algorithms. It is assumed that a major part of the current flowing through the object is restricted to the measurement plane (i.e. the plane determined by the electrodes which are used for measuring voltage differences) and the current flowing elsewhere is negligible. However, there is usually a three-dimensional (3D) variation of the conductivity distribution and if there are regions of high contrast c...
Citation Formats
M. A. Öztürk, “Design of tunable impedance matching circuit for a GSM antenna,” M.S. - Master of Science, Middle East Technical University, 2015.
METU IIS - Integrated Information Service open@metu.edu.tr