Use of Different Alkylammonium Salts in Clay Surface Modification for Epoxy-Based Nanocomposites

Date

2009-03-01

Author

Nakas, G. Ipek
Kaynak, Cevdet

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

124
views

0
downloads

Layered silicates become widely used reinforcement material in the polymer nanocomposite production in recent years due to their high aspect ratio, ease of processing, and low cost. In this present study, the aim was to evaluate the usability of a raw clay source (Resadiye, Turkey) in the production of epoxy/clay nanocomposites and to investigate the effects of different surface modifiers. For this purpose, raw Namontmorillonite clay was first purified and then surface modified by using different types of alkylammonium salts: tetramethyl ammonium bromide, benzyl triethyl ammonium bromide, dodecyl trimethyl ammonium bromide, hexadecyl trimethyl ammonium bromide, and octadecyl trimethyl ammonium bromide. Purification and surface modification of this clay were evaluated by using the following analyses; X-ray diffraction (XRD), cation exchange capacity (CEC), particle size distribution, and dissolved organic content. These analyses simply indicated that surface modification increased both interlayer spacing between the silicate layers and CEC of the clay. These improvements were directly proportional with the chain length of the surface modifier. Nanocomposite specimens were produced by adding 0.5 wt% surface modified clay into the epoxy matrix. These specimens were characterized by XRD, Si-mapping facility of SEM, and mechanical tests. XRD results indicated an exfoliated structure whereas Si-mapping showed the uniform distribution of clay particles in epoxy, leading to improved mechanical properties, for instance more than 100% increase in fracture toughness of the neat epoxy specimen. POLYM. COMPOS., 30:357-363, 2009. (C) 2008 Society of Plastics Engineers

Subject Keywords

Materials Chemistry, General Chemistry, Polymers and Plastics, Ceramics and Composites

URI

https://hdl.handle.net/11511/34556

Journal

POLYMER COMPOSITES

DOI

https://doi.org/10.1002/pc.20667

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Production of graded porous polyamide structures and polyamide-epoxy composites via selective laser sintering Jande, Yusufu A. C.; Erdal Erdoğmuş, Merve; Dağ, Serkan (SAGE Publications, 2014-06-01) Selective laser sintering was used for producing uniformly porous and graded porous polyamide structures. The porous structures were infiltrated with epoxy to produce composites. The porous and composite specimens were physically and mechanically characterized. Within the capabilities of the selective laser sintering machine and the materials used, porosities in the range 5-29% could be obtained in a controlled, repeatable manner. The ultimate tensile strength of the produced uniformly porous polyamide stru...
Effect of fused deposition modeling process parameters on the mechanical properties of recycled polyethylene terephthalate parts Bakir, Ali Alperen; Atik, Resul; Özerinç, Sezer (Wiley, 2020-08-01) Fused deposition modeling (FDM) filaments made of recycled materials are desirable for environmentally friendly and sustainable manufacturing of prototypes and load-bearing components in many applications. We investigate the effect of FDM process parameters on the mechanical properties of 3D-printed parts made of recycled polyethylene terephthalate (rPET) filaments. Increasing the nozzle temperature from 230 degrees C to 260 degrees C improves the strength of the specimens by 100%. Using a raster orientatio...
Contribution of carbon nanotubes to vibration damping behavior of epoxy and its carbon fiber composites Avil, Esma; Kadioglu, Ferhat; Kaynak, Cevdet (SAGE Publications, 2020-04-01) The main objective of this study was to investigate contribution of the non-functionalized multi-walled carbon nanotubes on the vibration damping behavior of first neat epoxy resin and then unidirectional and bidirectional continuous carbon fiber reinforced epoxy matrix composites. Epoxy/carbon nanotubes nanocomposites were produced by ultrasonic solution mixing method, while the continuous carbon fiber reinforced composite laminates were obtained via resin-infusion technique. Vibration analysis data of the...
Effects of micro-nano titania contents and maleic anhydride compatibilization on the mechanical performance of polylactide CAN, ULAŞ; Kaynak, Cevdet (Wiley, 2020-02-01) The first aim of this study was to compare influences of various contents of the micro- (200 nm) and nano (50 nm)-sized titania (TiO2) particles especially on the mechanical performance of the polylactide (PLA) biopolymer. Micro- and nano-composites were prepared by twin-screw extruder melt mixing, while the specimens were shaped by compression molding. Scanning electron microscope analyses and mechanical tests revealed that due to the most efficient uniform distribution in the matrix, the best improvements...
Influences of liquid elastomer additive on the behavior of short glass fiber reinforced epoxy Arikan, A; Kaynak, Cevdet; Tincer, T (Wiley, 2002-10-01) In this study, improvements in mechanical and thermal behavior of short glass fiber (GF) reinforced diglycidyl ether of bisphenol-A (DGEBA) based epoxy with hydroxyl terminated polybutadiene (HTPB) modification have been studied. A silane coupling agent (SCA) with a rubber reactive group was also used to improve the interfacial adhesion between glass fibers and an epoxy matrix. 10, 20, and 30 wt% GF reinforced composite specimens were prepared with and without silane coupling agent treatment of fibers and a...

Citation Formats

G. I. Nakas and C. Kaynak, “Use of Different Alkylammonium Salts in Clay Surface Modification for Epoxy-Based Nanocomposites,” POLYMER COMPOSITES, pp. 357–363, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/34556.