Comparison of yield criteria for porous materials.

Date

1979

Author

Uz, Azmi Taner

Metadata

Show full item record

Item Usage Stats

68
views

0
downloads

URI

https://hdl.handle.net/11511/5036

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Comparison of design codes for seismically isolated structures Acar, Emre; Akyüz, Uğurhan; Department of Civil Engineering (2005) This study presents information on the design procedure of seismic base isolation systems. Analysis of the seismic responses of isolated structures, which is oriented to give a clear understanding of the effect of base isolation on the nature of the structure; and discussion of various isolator types are involved in this work. Seismic isolation consists essentially of the installation of mechanisms, which decouple the structure, and its contents, from potentially damaging earthquake induced ground motions. ...
Comparison of leaching tests for Hazardous waste characterization Anbaryapan, Nur; Yetiş, Ülkü; Ünlü, Kahraman; Department of Environmental Engineering (2001)
Comparison of cost performance for three aggregate production planning models in a manufacturing firm. Tarakçioğlu, A Arif; Department of Operations Research (1981)
Comparison of compressive strength test procedures for blended cements Ülker, Elçin; Yaman, İsmail Özgür; Öztürk, Abdullah; Department of Cement Engineering (2010) The aim of this thesis is to twofold, in order to demonstrate the variabilities that can be faced within the compressive strength of blended cements, one blended cement namely CEM IV / B (P-V) 32.5N is selected and the 28-day compressive strength is obtained by 16 different laboratories following TS EN 196-1 standard. Later, to show the variabilities that could be faced by different standards, three different cement types were selected and their compressive strengths are determined following two procedures ...
Comparison of Preconcentration Technologies for Mine Mill Integration Klein, B; Bamber, A S; Weatherwax, T; Altun, Naci Emre (null; 2010-03-01)

Citation Formats

A. T. Uz, “Comparison of yield criteria for porous materials.,” Middle East Technical University, 1979.