Design and Structural Investigation of TiCrMnVAl Low Density High Entropy Alloy (LDHEA)

Date

2018-09-17

Author

Polat, Gökhan
Erdal, Ziya Anıl
Kalay, Yunus Eren

Metadata

Show full item record

Item Usage Stats

54
views

0
downloads

URI

https://hdl.handle.net/11511/78515

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

DESIGN, ANALYSIS AND IMPLEMENTATION OF QUARTER-WAVE ABSORBER STRUCTURE FOR UNCOOLED INFRARED DETECTORS WITH HIGH FILL FACTOR Cetin, Ramazan; Erturk, Ozan; Akın, Tayfun (2018-09-14) This study presents design, analysis, optimization, and fabrication of umbrella structures as an efficient quarter wave absorber within the Long Wave Infrared (LWIR) range for uncooled IR detectors. Both the effect of the ni-chrome (NiCr) layer and effect of varying pixel pitch sizes on the IR absorption performance of the umbrella structures are examined. An average of 96% absorption is measured for the optimized case within the LWIR range.
Design, construction and performance analysis of a rotary type regenerative heat exchanger Tarakçı, Mehmet; Yamalı, Cemil; Department of Mechanical Engineering (1991)
Design and evaluation of wellbore strengthening materials for fractured reservoirs Gargılı, Uğur; Durgut, İsmail; Department of Petroleum and Natural Gas Engineering (2019) The lost circulation is a primary consideration while drilling through fractured carbonate formations. Uncontrolled lost circulation may result in high nonproductive drilling time and cost, stuck pipe, side-tracks, blowouts and occasionally, the abandonment of expensive wells depending upon the severity of the loss. Additionally, drill solids entering the reservoir as a result of lost circulation may plug the pore throats, leading to a significant decrease in production. In the industry, there are two appro...
Design And Evaluation Of Wellbore Strengthening Materials For Fractured Reservoirs Gargılı, Uğur; Gücüyener, İ. Hakkı; Durgut, İsmail; Doğan, H. Ali; Ay, Ahmet (2022-1-01) Fractured formations are commonly encountered while drilling carbonate reservoirs. Drilling of fractured formations usually results in lost circulation. In some cases, target zones cannot be reached due severe to lost circulation incidents. Fractures encountered before reaching target zones can be sealed off by using wellbore strengthening materials (WSM). WSM are drilling fluid additives which are specially sized and designed particulates. They are generally used to strengthen the wellbore and to prevent t...
Design and analysis of the 3-DOF translational shock absorbing parallel manipulator Yıldız, Gencay; Özgören, Mustafa Kemal; Department of Mechanical Engineering (2016) In defense industry, the environmental conditions play very critical and dangerous roles for valuable and sensitive electronic equipments. One of the most dangerous situations is high level shocks caused by explosions. In order to protect the valuable assets from the dangerous effects of shock some special designed shock absorbers are needed. For some shock absorbing cases, standards products manufactured according to the Military Standards are used and their implementation is considerable easy. Helical, wi...

Citation Formats

G. Polat, Z. A. Erdal, and Y. E. Kalay, “Design and Structural Investigation of TiCrMnVAl Low Density High Entropy Alloy (LDHEA),” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78515.