Realization of Harmonic Motion Microwave Doppler Imaging Method

2016-06-10
Khamalı Tafreshı, Azadeh
Gençer, Nevzat Güneri

Suggestions

Realization of neutral state green polymeric materials
Durmuş, Asuman; Toppare, Levent Kamil; Department of Chemistry (2009)
Polymeric electrochromic materials that has as one of the three complementary colors (red, green, and blue) in the neutral form and become transparent via oxidation (or reduction), has a crucial importance towards use of these materials in electrochromic devices and displays. To reflect red or blue color in neutral state, the materials have to absorb at only one dominant wavelength. On the contrary, to have a green color, there should exist at least two simultaneous absorption bands in the red and blue regi...
Realization of detector based spectralresponsivity scale from ultraviolet to near infrared regions of electromagnetic spectrum
Bazkır, Özcan; Esendemir, Akif; Department of Physics (2004)
Realization of spectral responsivity scale was studied in three stages. Firstly, absolute optical power measurements using Electrical Substitution Cryogenic Radiometer (ESCR) was studied. The absolute measurements were done at discrete laser wavelengths of tunable Ar+ (488 nm and 514.5 nm), Nd:YAG (532 nm) and fixed He-Ne (632.8 nm) laser sources. To increase measurement accuracy the method used for the stabilization of laser beams, transmittance measurements of optical windows, and minimization of scattere...
Realization of Single Layer Microbolometer Detector Pixel Using ZnO Material
Tanrikulu, M. Yusuf; Yildizak, Cigdem; Okyay, Ali K.; Akar, Orhan; Sarac, Adem; Akın, Tayfun (Institute of Electrical and Electronics Engineers (IEEE), 2020-09-01)
This paper presents the realization of a single layer microbolometer pixel fabricated using only ZnO material coated with atomic layer deposition. Due to the stress-free nature and high temperature coefficient of resistance of the ALD coated ZnO material, it can be used both as structural and active layers in microbolometer detectors. The design, simulations, and the fabrication optimization of two types of single layer ZnO microbolometer having pixel pitch of 35 mu m are shown in this study. The designed p...
Realization of transmitter and receiver clock generation units and channel switching unit in a modified analog radio relay
Büyüksemerci, Ayhan; Aşkar, Murat; Department of Electrical Engineering (1987)
Realization of human gait in virtual fluid environment on a robotic gait trainer for therapeutic purposes
Ertop, Tayfun Efe; Yuksel, Tolga; Konukseven, Erhan İlhan (Elsevier BV, 2018-7)
Patients with disorders such as spinal cord injury, cerebral palsy and stroke can perform full gait when assisted, which progressively helps them regain the ability to walk. A very common way to create assistive effects is aquatic therapy. Aquatic environment also creates resistive effects desired for strength building. In this study, realization of a virtual fluid environment on a robotic gait trainer is presented as an alternative method. A model was created to determine torques and forces acting on the h...
Citation Formats
A. Khamalı Tafreshı and N. G. Gençer, “Realization of Harmonic Motion Microwave Doppler Imaging Method,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/82182.